SPECIAL REPAIR/REPLACEMENT OF CONVENTIONAL MH, HPSV LIGHT UNDER GE NASIRABAD.

Amount

Dismantling of old unserviceable ACSR conductors from existing PCC/RCC/Steel poles.

Dismantling of old unserviceable insulators any type & any size from pole (PCC/RCC/Steel )

Dismantling of cross arms of MS channel or angle section etc complete.

Dismantling stay assembely complete with stay wire.

Disconnecting and taking out old existing unserviceable LT/HT under ground cable of any description and in any position from trenches/ under floor, roads, paths or from walls / from poles/ from ducts etc.complete all as specified and directed of following cross sectional area.

Dismantling GI earth wire/ old guarding.

Taking out old pipe 40/50/80 mm bore.

Dismanling old PCC pole or steel tubular LT poles of 9 mtr long with foundation, complete, all as directed.

Taking out old pole box .

Taking down old street light bracket of any size, all as directed.

Supply and fixing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 10 Sqmm 4 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed.

Supply and fixing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 16 Sqmm 4 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed.

Supply and fixing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 50 Sqmm 4 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in hard/densesoil complete all as specified and directed.

All as per description of serial item No. 14.00 above but exc 1.50 and n.exc 3.0m deep complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in any type of soil complete all as specified and directed

Removal of surplus soil as obtained from excavation to a distance not exc. 50 M and depositing where directed at a level not exc. 1.5 M above the starting point all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' bricks laid in trenches flat complete all as specified and directed by Engineer-in-charge.

Supply and fixing light grade GI tubing 40 mm dia with all fitting laid in trenches for cable p[rotection, all as directed..

Supply and fixing light grade GI tubing 50 mm dia with all fitting laid in trenches for cable p[rotection, all as directed..

Supply and fixing light grade GI tubing 80 mm dia with all fitting laid in trenches for cable p[rotection, all as directed..

S&F street light Engineering plastic one piece moulding control box with locking arrangment made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 04 Nos aluminium busbar or terminal four nos (3P-RYB and N) of rating 63 amps for single phase and neutral on porcelain based insulators and fixing clamps to pole for street lights, complete all as specified & directed at site. Make:- Sintex/Hensel/SHI/Brite

Supply ,erecting and fixing the true vertical position,steel tubular swaged pole(410 SP-31),09 mtr long, complete with cast iron base plate,pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole ,including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed.(Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed. Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

Dismantling carefully steel pole 9 metre long with foundation and transporting the same at new location within cantt area as directed by EIC & erection & install the same complete all as specified and directed NOTE: Excavation and earth work and PCC for foundation shall be measured and paid for separately.

S & F GI bracket made out of GI pipe light grade of size 32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

Taking down serviceable security lights and transporting the same at new location within cantt area as directed by EIC and fixing the same, after fixing making the fitting functional complete all as specified and directed.

S&F LED street light fitting 70/72 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make:- Cat Part No LSTP-72-CDL-M Of Crompton or equivalent from Havells/Halonix/Phillips LED

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation of PCC poles/struts including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work, finishing even and smooth without using extra cement, complete all as specified & directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2.5 sq. mm 3 core nominal cross section in service connections complete all as specified & directed.

M & L for carrying out boring under the black top road for crossing of LT cable/protection pipe by any means boring machine or otherwise without damaging black top surface of road for fixing of GI pipe 80mm bore under the road complete all as specified and directed.

Supply, fixing and testing Street light automatic Nature switch of capacity 5 KW single phase complete with using infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature Switch operation should be based on Nautral Light Lux* level. Required illuminance level for switching ON is ≤ 30 Lux and for swiching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min.4 hrs to max 12 hrs. The sensor along with suitable power contactor(s) and incoming-outgoing MCBs should be enclosed in a pole/wall/panel mountable Rust proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure ( with Hinged LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation(i.e Sensor By-Pass option). Make - Kakatiya Energy system Model SWADEEP-66-5KW 1P.

Supply, fixing and testing Street light automatic Nature switch of capacity 8 KW three phase complete with using infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature Switch operation should be based on Nautral Light Lux* level. Required illuminance level for switching ON is ≤ 30 Lux and for swiching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min.4 hrs to max 12 hrs. The sensor along with suitable power contactor(s) and incoming-outgoing MCBs should be enclosed in a pole/wall/panel mountable Rust proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure ( with Hinged LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation(i.e Sensor By-Pass option). Make - Kakatiya Energy system Model SWADEEP-66-8KW 3P.

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion.. (Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.)

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using earth lead wire 4.00 mm dia as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 15 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion.. (Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.)

Anu Trading Co

M/S SHIVA TRADERS

PD GUPTA AND COMPANY

M/s SUNIL ENTERPRISES

Nvimal Engineers and Contractor

M/s Pankaj Enterprises