Construction of Anganwadi Building at Anna Nagar Hope Town under Bambooflat Sub Division under EE RCD Wimberlygunj SW Providing IEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. a) 5/6 A switch

b) 3 pin 5/6 A socket outlet

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and fixing of PVC box of following size on surface with suitable size of cover plate in the front including connection etc., as required. a) 2 Way (For 15A)(3.5" x 8")

b) 6 way (For 5A)(3.5" x 10")

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying of A.C Ceiling fan (1200 mm) sweep without regulator i/c wiring down rod of standard length (upto 30 cm) with all accessories etc as required. Similar to make Bajaj Code No. 250467 Kassels 50 ISI marked (White C/F) or its equivalent etc., as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Batten for 1 x 18 Watt LED Tube Light Similar to Bajaj Cat No. BLRB - DB 118 Code No. 112181 including LED Tube Light Similar to Bajaj Cat No. BLRB 18W CW Code No. 112066 or its equivalent etc., as required.

Supplying of 25W LED Street Light Platinum TG, Pressure die Cast aluminum IP66 Road way luminaire with toughened Glass suitable for Pole dia 40mm  (Max) similar to Havells Cat No. LHETAXU7PA6J025 or its equivalent etc., as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing of 32 mm dia GI Pipe for Street Light Water Tight Bracket including Bending to Shape, 40mm x 3 mm flat iron clamps and wiring with 1.5 sq.mm WP / PVC wire and painting the flat iron with primer and finish paint etc., as required.

Supplying and fixing brass batten/ angle holder including connections etc. as required

Supplying and fixing of LED Glass Bulb 5W 6.5 K Similar to Ordering Code No. SSK - QA0602 or its equivalent etc., as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB/ Isolator) a) 8 way, Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing 0.5 amps to 5 amps rating, 240/415V, 50Hz, 10KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

Supplying and erection of Metering Box made out of SMC of overall size 310mm x 285mm x 180mm with hinged cover and locking arrangements, viewing glass etc., as required.

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000mm, outer dia 50 mm, inner dia 25 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

DILIP RAJ

M/s G K Construction

HITUI