Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC NATIONAL HIGHWAY KUNJWANI JAMMU KUNJWANI JAMMU JAMMU KASHMIR 180012 UDYAM JK 07 0012082 | JAMMU | JAMMU AND KASHMIR | 180012 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹19.1 L+₹2.0 L (11.6%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹19.8 L+₹2.6 L (15.3%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Oct 2022, 6:00 pmClosed
GE (AF) LEH
GE (AF) LEH, C/O 56 APO
REPAIR/ REPAINTING/ POLISHING OF STEEL / WOODEN FURNITURE AT AF STN LEH UNDER GE (AF) LEH
2022_MES_526981_3
GE(AF)/LEH-16/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) LEH, C/O 56 APO
As Per tender Document
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LEH
₹40,000
Yes
30 Dec 2022
13 Sept 2022
5 Oct 2022
13 Sept 2022
3 Oct 2022
20 Sept 2022
Amount
SCHEDULE 'A' PART- I : WOODEN FURNITURES
Chair Dining : (FD-279)
Dismantling of unserviceable front leg, S&F of new leg made out of 1st class shesham hard wood complete all as per specification and as shown in drg.
Description all as per ser item No (1.01) above but rear legs.
(Description all as per ser item No (1.01) above but centre stiffeners.
Description all as per ser item No (1.01) above but side stiffeners.
Description all as per ser item No (1.01) above but back rest.
Removing of unserviceable cane seat by replacing with wooden bottom of 6 mm thick plywood BWP duly fixed with 50 mm thick 32 density foam cushion covered with approved quality of tapestry cloth as directed by Engr-in-Charge/GE.
Chair Easy :(FD-229)
Dismantling of unserviceable front leg, S&F of new leg made out of 1st class shesham hard wood complete all as per specification and as shown on drg.
Description all as per ser item No (2.01) above but rear legs.
Description all as per ser item No (2.01) above but front runner
Description all as per ser item No (2.01) above but back runner.
Description all as per ser item No (2.01) above but arms.
Removing of unserviceable cane seat by replacing with wooden bottom of 6 mm thick plywood BWP duly fixed with 50 mm thick 32 density foam cushion covered with approved quality of tapestry cloth as directed by Engr-in-Charge/GE.
Table 3 ft x 2 ft : (FD-283 & 284)
Dismantling of unserviceable leg, S&F of new leg made out of 1st class shesham hard wood complete all as per specification and as shown on drg.
Description all as per ser item No (3.01) above but side rails long.
Description all as per ser item No (3.01) above but side rails short.
Description all as per ser item No (3.01) above but drawer duly fixed with 6 mm plywood BWP on bottom.
S&F of top of table made out of 18 mm thick prelaminated particle board of 4 mm thick 1st class teak wood beading all around.
Table writing : (FD-275)
Dismantling of unserviceable leg, S&F of new leg made out of 1st class shesham hard wood complete all as per specification and as shown in drg.
Description all as per ser item No (4.01) above but side rails.
Description all as per ser item No (4.01) above but drawer duly fixed with 6 mm ply on bottom.
S&F of top of table made out of 18 mm thick prelaminated particle board of 4 mm thick 1st class teak wood beading all around.
Bed hard with plywood top :(FD-246)
Dismantling of unserviceable supports, S&F of new supports made out of 1st class shesham hard wood complete all as per specification and as shown in drg.
Description all as per ser item No (5.01) above but long rail.
Dismantling of unserviceable head rest, S&F new head rest made of 1st class teak wood hard duly covered with ply as per drg.
Dismantling of unserviceable top, S&F new top of 12 mm thick commercial plywood BWP on wooden frame in one piece size 1.85 mtr x 0.9 mtr all as per drg.
Dismantling of unserviceable foot rest, S&F new foot rest made of 1st class teak wood hard duly covered with ply as per drg.
Sofa set 5 seater : (FD-281)
S&F arm rest made out of 1st class shesham wood hard of size 35 x 70 mm shape and length as per drg.
S&F front long rail made out of 1st class shesham wood hard of long piece (3 seater) of size 35 x 70 mm shape and length as per drg.
S&F back long rail made out of 1st class shesham wood hard of long piece (3 seater) of size 35 x 70 mm shape and length as per drg.
S&F front rail of single seater made out of 1st class shesham wood hard of size 35 x 70 mm shape and length as per drg.
S&F back rail of single seater made out of 1st class shesham wood hard of size 35 x 70 mm shape and length as per drg.
S&F battens of back rest made out of 1st class shesham wood hard 50 x 20 mm, shape and length as per drg.
S&F battens of seat rest made out of 1st class shesham wood hard 50 x 20 mm, shape and length as per drg.
S&F of legs made out of 1st class shesham wood hard 70 x 350 mm, shape and length as per drg.
Removing of old unserviceable cushion of sofa chair seat and back, S&F of new cushion made of 100 mm thick foam 32 density Make-Sleepwell/Curlon/equivalent covered with tapestry cloth of not less than Rs 350/- per sqm complete all as shown in drg and as specified.
Chair writing :(FD-280)
Dismantling of unserviceable front legs, S&F of new legs made out of 1st class shesham wood hard complete as per specification and as shown on drg.
Description all as per ser items No (7.01) above but rear legs.
Description all as per ser items No (7.01) above but centre stiffeners.
Description all as per ser items No (7.01) above but side stiffeners.
Description all as per ser items No (7.01) above but back rest.
Description all as per ser items No (7.01) above but Arms.
Removing old unserviceable cane seat & back and replacing with wooden bottom of 6 mm thick plywood BWP duly fixed with 50 mm thick foam 32 density cushion covered with approved quality tapestry cloth of not less than Rs 350/- per sqm cost as directed by Engr-in-Charge/GE.
Table Peg : (FD-277)
Removing old unserviceable top of table, S&F new one made of 18 mm thick prelaminated particle board exterior grade type-II one side teak face with 4 mm thick 1st class hard wooden beading all around complete all as specified and as per drg.
Removing old unserviceable legs, S&F new one made out of 1st class shesham wood hard all as per drg.
Teapoy Wooden : (FD-278)
Removing old unserviceable top of teapoy, S&F new one made of 18 mm thick prelaminated particle board exterior grade type-II one side teak face with thick 1st class teak wood beading all around complete all as specified and as per drg.
Removing old unserviceable legs, S&F new one made out of 1st class shesham wood hard all as per drg.
Table centre : (FD-274)
Removing old unserviceable top of table centre, S&F new one made of 18 mm thick prelaminated particle board exterior grade type-II one side teak face with thick 1st class teak wood beading all around complete all as specified and as per drg.
Removing old unserviceable legs, S&F new one made of 1st class shesham wood hard all as per drg.
Polishing M&L for applying two coats of french polish (Make Bostolite or equivalent ) to complete the item internally and externally including necessary preparation of surface complete all as specified and directed for the following wooden furniture items.
Bed plywood top (FD-246)
Chair dining (FD-279)
Chair easy (FD-229)
Chair writing (FD -280)
Peg table (FD-277)
Table bed side wooden (FD-276)
Table centre (FD-274)
Table writing : (FD-275)
Table 3 ft x 2 ft : (FD-283 )
Teapoy wooden : (FD-278)
Sofa set 5 seater 3 pcs (FD-281)
Chair dining with cushion (dining) (FD-270)
BATH MATH WOODEN (FD-254)
M&L for applying two coats of white shade of synthetic enamelled paint Shalimar/Johnson/Nicholson or any other equivelant make as approved by Engr-in-charge.
Locker bed side wooden (FD-222)
S&F of door shutters (Set of 2 shutters) made of block board 18/19 mm thick grade first quality interior grade commercial type having 4 mm thick teak wood edging all around the shutters fixed with nails.
S&F of 6 mm thick plywood commercial on the back side of the wooden lockers.
S&F of 6 mm thick plywood comercial on the top of the wooden lockers.
S&F of 6 mm thick plywood commercial on the side of wooden lockers(each side will be measured separately) all as per drg.
Repairing and re-fixing of the exisiting shelves of wooden lockers as directed and as per drg.
S&F of legs made of shesham wood hard for wooden lockers size and shape as per drg.
M&L for applying two coats of OG/Brown shade of synthetic enamelled paint Shalimar/Johnson/Nicholson or any other equivelant make as approved by Engr-in-charge.
Chain dining with cushion (FD-270)
Dismantling of unserviceable front leg, S&F of new leg made out of 1st class shesham wood complete all as per specification and as shown on drg.
Description all as per ser item No (14.01) above but rear legs.
Description all as per ser item No (14.01) above but centre stiffeners.
Description all as per ser item No (14.01) above but side stiffeners.
Description all as per ser item No (14.01) above but back rest shape as per requirement.
Removing of unserviceable cushion seat & back rest by replacing with 50 mm thick 32 density foam cushion covered with approved quality tapestry cloth of not less than Rs 350/- per sqm cost as directed by Engr-in-Charge/GE.
SCHEDULE 'A' PART - II : STEEL FURNITURES
Charpoy GI Pipe : (FD-220)
Removing broken/unserviceable long rail of charpoy GI pipe, supply & fixing new long rail made out of GI pipe 32 mm dia medium grade ISI marked (As per IS-1239) duly threaded to both ends as specified and shown on drg.
Removing broken/unserviceable short rail of charpoy GI pipe, cutting of long rails retrieved out of item ser No (15.01) here in before & making short rail duly threaded to both ends as per drg & fixing in the charpoy frame.
Removing broken/unserviceable legs of charpoy GI pipe, cutting short rail retrieved from ser No (15.02) herein before & making legs duly threaded to both ends & fixing in the charpoy frame all as per drg.
Removing broken/unserviceable old GI elbow of charpoy GI pipe, supply & fixing of new GI elbow 3 way 32 mm dia ISI marked to the charpoy frame as per drg.
Removing broken/unserviceable old GI check nuts of charpoy GI pipe, supply & fixing of new GI check nuts 32 mm dia of approved quality to the frame of charpoy GI pipe as per drg.
Removing broken/unserviceable old GI plug of charpoy GI pipe, supply & fixing of new GI plug of approved quality to the bottom of legs of charpoy GI pipe as per drg.
Removing of unserviceable old cotton/nylon newar from charpoy GI pipe and S&F of 12 mm thick commercial plywood BWP grade as directed by Engr-in-Charge/GE.
Removing of unserviceable old plywood top from charpoy GI pipe and S&F of 12 mm thick commercial plywood BWP as directed by Engr-in-Charge/GE
Almirah large steel : (FD-1031)
Removing unserviceable 3 way locking device complete but excluding lock and handle, repair the same as per trade practice and making locking arrangement functional.
Removing existing unserviceable lock of Almirah large steel, S&F new lock of brass as existing lever with duplicate keys. Make of lock shall be Godrej/Harrison. All as directed by the Engr-in-Charge.
Removing exisitng unserviceable handle of Almirah large steel, S&F new handle of screwed heady duty. All as specified by the Engr-in-Chage.
Removing exisitng unserviceable legs of Almirah large steel, S&F new legs made of 1.25 mm thick MS sheet made to shape all as shown in drg. Legs shall be fixed by way of running welding as specified by the Engr-in-Chage.
Almirah med steel : (FD-1032)
All as per ser item No (16.01) herein before but Almirah med steel.
All as per ser item No (16.02) herein before but Almirah med steel.
All as per ser item No (16.03) herein before but Almirah med steel.
All as per ser item No (16.04) herein before but Almirah med steel.
Locker bed side steel :(FD-1029)
All as per ser item No (17.04) herein before but locker steel
Removing exisitng hasp & staple from locker steel, S&F new hasp & staple of MS steel as approved by Engr-in-Charge. All as showing in drg and as per trade practice.
Removing exisitng MS handle from locker steel, S&F new handle approved by Engr-in-Charge. All as shown in drg.
Table office clerk steel : (FD-1004) :
Removing unserviceable lock from drawer, S&F new lock of brass with duplicate keys. All as shown in drg and as directed by Engr-in-Charge.
Replacement of unserviceable top with new one of size 1200 x 600 mm made of 18 mm thick prelaminated particle board one side teak face (Exterior grade). PVC edging shall be provided all around as per trade practice.
Table office officer steel :(FD-1003)
Removing unserviceable lock from drawer, S&F new lock of brass with duplicate keys. All as shown in drg and as directed by Engr-in-Charge.
Replacement of unserviceable top with new one of size 1680 x 920 mm made of 18 mm thick prelaminated particle board one side teak face (Exterior grade). PVC edging shall be provided all around as per trade practice.
Chair tubular steel with arms : (FD-75M)
Removing of existing unserviceable seat from chair tubular steel with arms, S&F of new seat made of hard wood duly canned with 2 mm wide half round white colour plastic cane of Shah Brand in Godrej pattern. As shown in drg and directed by Engr-in-Charge.
All as per item ser No (21.01) herein before but back rest.
Replacement of unservicebale arm rest of required size & shape made of 2nd class soft wood duly painted with two coats of black paint as directed by Engr-in-Charge.
Provisioning of two numbers of flat iron stiffeners at required place on each chair of size 430 x 25 x 3mm to rest the seat. Flat iron shall be fixed with gas welding.
Chair Verandah:- (FD-259) Removing of existing unserviceable seat from chair tubular steel with arms, S&F of new seat made of hard wood duly canned with 2 mm wide half round white colour plastic cane of Shah Brand in Godrej pattern. As shown in drg and directed by Engr-in-Charge.
Painting :-
Almirah large steel (FD-1031) : Denting where ever required making the surface smooth after removing the old paint, filling putty at required places and spray painting of two coats externally and internally to Almirah large steel of OG/Grey shade of 1st quality synthetic enamelled paint Shalimar/ Johnson/ Nicholson or any other equivelant make as approved by GE and all as directed.
Almirah med steel (FD-1032) : All as per item No 23.01 here in before but Almirah med steel.
Locker bed side steel (FD-1029) : All as per item No 23.01 here in before but Locker bed side steel.
Book Case Steel (FD-237) : All as per item No 23.01 here in before but Book case steel
Table office clerk steel (FD-1004) : All as per item No 23.01 here in before but Table office clerk steel
Table office officer steel (FD-1003) : All as per item No 23.01 here in before but table office steel.
Rack steel six shelves (FD-106M) : All as per item No 23.01 here in before but rack steel six shelves
Rack side with 3 tray (FD-1023) : All as per item No 23.01 here in before but rack side with 3 tray
Chair tubular steel with arms (FD-75M) : All as per item No 23.01 here in before but Chair tubular steel with arms.
Chair Verandah (FD-259) : All as per item No 23.01 here in before but Chair Verandah
Box kit steel (FD-98M) : All as per item No 23.01 herein before but Box kit steel
Form without back (FD-77M) :
Repair/repalce the worn out frame of form w/o back consist of square tube frame complete and provide a new square tube frame as per exisitng size and shape including painting two coats with synthetic enamel paint and fixing of new shoes as per exisitng size.
Repair/replace of form w/o back top wooden planks by using 2nd class HW including french polishing two coats preparation of surfaces including spray painting on existing frame.
Chiar visitor steel (TP) :
Removing of old unserviceable tapestry cloth from seat and back, S&F of new tapestry cloth of not less than Rs 350/- per sqm complete all as approved by Engr-in-Charge/GE.
Replacement of unservicebale arm rest of required size & shape as directed by Engr-in-Charge.
Chair revolving executive high back(TP)
Removing of unserviceable old coaster wheel and S/F of new coaster wheel superior quality as approved by Engr-in-Charge/GE,
Removing of old unserviceable tapestry cloth from seat and back, S&F of new tapestry cloth of not less than Rs 350/- sqm complete all as approved by Engr-in-Charge/GE.
Removing of unserviceable hydrauly system and S/F of new hydraulic system complete superior quality as approved by Engr-in-Charge.
Chair revolving half back(TP)
Removing of unserviceable old coaster wheel and S & F of new coaster wheel superior quality as approved by Engr-in-Charge/GE,
Removing of old unserviceable tapestry cloth from seat and back, S&F of new tapestry cloth of not less than Rs 350/- per sqm complete all as approved by Engr-in-Charge/GE.
Removing of unserviceable hydrauic system and S & F of new hydraulic system complete superior quality as approved by Engr-in-Charge.
Chair revolving computer half back (TP)
Removing of unserviceable old coaster wheel and S & F of new coaster wheel superior quality as approved by Engr-in-Charge/GE,
Removing of old unserviceable tapestry cloth from seat and back, S&F of new tapestry cloth of not less than Rs 350/- per sqm complete all as approved by Engr-in-Charge/GE.
Removing of unserviceable hydrauly system and S & F of new hydraulic system comple superior quality as approved by Engr-in-Charge.
Note : Schedule of credit for to be deducted on acceptances of bid.
B S FURNITURE
Modern Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .