Provn of toilet block,interlocking path, arboriculture at children park and other sanctioned works at fazilka mil stn.

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required complete all as specified and directed by Engr-in-charge.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-charge.

M&L PCC in foundations, filling and mass-concrete type D2(1:4:8)using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in complete all as specified and directed by Engr-in-charge.

S&F 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork ,applying evenly a coat of blown type bitumen at the rate of 1.5kg/per sqm and binding with clean dry sand @ 0.05 cum per sqm, polythene film, 150 micron thick,laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.mtr complete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface. ( Area of the sub structure in contact with backfill to be measured.)

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed by Engr-in-charge.

M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed by Engr-in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete all as specified and directed by Engr-in-charge.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-charge.

Hardcore of Broken brick bats n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L 50mm thick PCC type C-1, (1:3:6) using 20mm graded stone aggregate Finished even & smooth without using extra cement as in plinth protection complete all as specified and directed by Engr-in-charge.

M&L continuous brick edging, with burnt clay bricks of sub class ‘B’ (old size) with width equal to the depth of the brick laid dry on end vertically including sand cushioning & filling interstices with sand (Tibba sand) complete all as specified.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed by Engr-in-charge.

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and directed by Engr-in-charge.

Applying three coats of white wash on new Ceiling surface including preparation of surface complete all as specified and directed by Engr-in-charge.

Applying two coats of white wash on new wall surface including preparation of surface complete all as specified and directed by Engr-in-charge.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed by Engr-in-charge.

S&F Aluminium handles 125mm size, cast type, anodised complete all as specified and directed by Engr-in-charge.

S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge.

S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified

S&F Sheet glass frosted one side 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed by Engr-in-charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.

M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and directed by Engr-in-charge.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.

M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.

S&F Vitreous China wash down water closet pan (Pedestal pattern) white excluding fixing bolt incl plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and jet spray complete fixed in repair complete all as specified and directed by Engr-in-charge.

S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets, CP, brass, Waste fittings 32mm bore & PVC Waste Pipe 32 mm bore complete all as specified and directed by Engr-in-charge.

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engr-in-charge.

S&F CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F Angle Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-charge.

S&F Angle Stop valves 15 mm bore fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-charge.

S&F Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge.

S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F brass CP shower rose fancy type of fixing with 15mm pipe complete all as specified and directed by Engr-in-charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity

S&F Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-charge.

S&F Ball valves PTMT 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes 25mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acces door complete all as specified and directed by Engr-in-charge.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-charge.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-charge.

Material and labour DWCPE pipe 150 mm dia ( 160 mm OD) completed laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/union/socket etc complete laid on PCC bed 150mm thick PCC in 1:3 type C2 of avg depth 0.90 to 1.65 m depth incuding packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extgra cement including forms, moulds mitred/stopped ends complete all as specified and directed by Engr-in-charge.

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound 3% by weight of cement finished even & smooth without using extra cement ( WPC shall be measured & paid separately) complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick on fair face of brick work/concrete surfaces in CM (1:4) complete all as specified and directed by Engr-in-charge.

Supplying only Integral waterproofing compound complete all as specified and directed by Engr-in-charge complete all as specified and directed by Engr-in-charge.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed by Engr-in-charge.

M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.

S&F machine pressed precast concrete interlocking paver block with grey cement & pigment, any shape and size confirming to IS 15658-2006 of 60 mm thick M-40 grade including and over 25mm thick sand cushion complete all as specified and directed by Engr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Supply and planting of Hedge and Shrubbery (Anarmi, Ficus and the like) as directed by Engineer-in-Charge minimum 3 feet above GL including creation of Beds by excavating 60 cm deep and 60 cm wide trenching the excavated base to a further depth of 30 cm refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio 8:1 (8 parts of stacked volume of earth after reduction of 20% with 1 part of stacked volume of sludge or manure after reduction by 8%) flooding with water filling with earth if necessary, watering and finally fine dressing leveling etc including stacking and disposal of material declared unserviceable and surplus earth by spreading and leveling as directed within a lead of 50 m and lift up to 1.50 m complete all as specified and as directed.

M&L for continuous brick edging with fly ash brick (old size) with width equal to the depth of the brick, laid dry, on edge complete all as specified and directed by Engr-in-charge.

Supply and Planting of "Neem" plant in poly bags of 0.25 m to 0.30 m dia with height 1.20 m to 1.80 m including digging holes 1.20 m dia x 1.20 m deep in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio 2:1 (2 parts of stacked volume of earth after reduction of 20% with 1 part of stacked volume of sludge or manure after reduction by 8%) flooding with water and removal of surplus soil, with & including antitermite treatment using suitable chemicals as required and as directed, making a "Thaola' complete all as specified and directed :- Notes :- (i) The contractor’s quoted rates shall be deemed to include for necessary excavation and earth work, necessary manure or sludge and antitermite treatment of soil including necessary chemicals etc. (ii) The excavated earth if found suitable and approved by GE shall be used for filling in the holes after planting of trees/plants. However, in case the excavated earth is not found suitable for refilling and not approved by GE, contractor shall arrange suitable good earth from his own sources as approved by GE and contractor's quoted rates shall be deemed to include for arranging and transporting of good earth including filling in the holes and nothing extra shall be admissible on this account.

All as per SI Item No. 76 above but of Canerydate Palm

All as per SI Item No. 76 above but of Gulmohar

All as per SI Item No. 76 above but of Fruit Bearing trees

All as per SI Item No. 76 above but of Plumeria

All as per SI Item No. 76 above but height not less than 0.6m above GL of flower plants like ticoma, rose, motia, chandni, Ixora, marigold rose, vinca (any colour) and as per season required or directed by GE.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L Glazed ceramic joint free coloured tiles in vertical surface of size 350x250x7 mm thick set and jointed in neat cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white or colour cement to match the colour of tiles complete all as specified.

S&F Bib tap 15mm bore of standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. (Minimum weight 15mm-90gms/20mm-125gms).

S&F precast RCC 1:1.5:3 type A-1, lawn bench and back support of size 1.50x0.60 m of maximum three person seating capacity supporting precast RCC type A-1 for back & base with including assemble the precast member with suitable nutt & bolt and placing and anchoring with hold fast 350 mm-16mm dia MS bar on concrete base (size 1.20x0.60 m for each support) with 100 mm thick PCC 1:2:4 Type B-1 over 150 mm thick sub base 1:4:8 type D2 complete all as specified and as directed by Engineer in Charge.

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan/Bell Point controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).

All as per Srl item No. 86 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.

All as per Srl item No. 86 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.

S&F switch Piano type single pole one way 5 Amp,230 VAC supply.

S&F socket two in one ,3 Pin 5 Amps 230 VAC supply, .

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.

Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.

S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.

S&F single door SPN DB 2 way having facility to fix MCB DP/SPN 2 ways complete fitted with bus bars, neutral links including provision of MCB DP 6-16A and making good disturbed surface area complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/Topson

Material and labour for sand cushioning, with dry and clean fine river sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. (Note:- Punned thickness shall be considered for payment purpose)

Supply and laying Best quality, locally available, sub class ‘B’ bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed.

Supply and fixing GI tubing light grade of size 50 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road for cable protection including fittings (elbow, tee, socket etc) including taking out old pipe any size complete all as specified and as directed. (Note:- Excavation and earthwork and MS clamp as required shall be measured and paid separately under respective item of Sch.)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50 Cycle per second, size 300mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 50 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 40 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.

S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

S & F stop valve size 40 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

S & F stop valve size 50 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 15 mm dia bore.

M &L for cutting existing Steel tubing laid in trenches of any size for addition and alternation

M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector

S& F Bib taps, 15 mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F 360 degree rotating sprinkler having irrigation range of 30 feet under a water pressure of 40 PSI with high quality adjustable spray arms with 4 nozzle, adjusting sparkling angle of 45 degree to 90 degree to achieve large area watering effect made up of high quality ABS type material suitable for grass irrigation efficiently , easy to use complete all as specified and directed by Engr-in-Charge.

S&F outdoor type submersible pump ideal for fountain for water circulation with water lifting capacity up to 2 meters, oil free copper winding motor , operate on 240 volts 50 Hz of minimum wattage 50 watt made up of high grade material provide smooth operation for water pumping purpose complete all as specified and directed by Engr-in-Charge. Note : Warranty certificate of submersible pump should be submitted to AGE E/M office.

M&L cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggrigate for foundations fillings and mass concrete all as specified and directed by Engineer -in-charge.

Supplying, fixing,testing,& commissioning intergal decorative Water proof 9 Watt LED bollard light with opal acrylic with IP-65 protection with inbuilt driver, colour temperature of 5700 K of graphite grey powder coated finish type complete all as specified and directed by Engr-in-Charge. Make : Bajaj Model No. BGBOS 600 9W LED (or) equivalent model of make Philips/Crompton Greaves/Havells as approved by GE.

N.R.Builders