Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹11,250
Closing Date
29 Oct 2026, 5:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
MR rakesh sharma(Shivpur)(DFLT)
MUNICIPAL CORPORATION, RAIPUR
नवीन आंगनबाडी निर्माण मोवा (मस्जिद के पास) (वार्ड क्र. 11 डॉ. भीमराव अंबेड़कर वार्ड)
201592
NIT NO: 182/PWD/Zone-9/2026-27 RAIPUR DATED: 13/10/2026
RESTRICTED TENDER
WORKS
PERCENTAGE
6 days
MUNICIPAL CORPORATION
Required Past Technical Experience: AS PER NIT
Required Financial Turnover (in INR): AS PER NIT
Required Bid Capacity (in INR): AS PER NIT
12 documents required · 12 mandatory
Urban Administration and Development Department (UADD)
WORKS
MR rakesh sharma(Shivpur)(DFLT)
RESTRICTED TENDER
PERCENTAGE
A B C D
MUNICIPAL CORPORATION, RAIPUR
TENDER SECTION
COMMISSINOR, MUNICIPAL CORPORATION, RAIPUR
120
06
No
1
201592
29 Oct, 2026 5:30:00 PM IST
2 Nov, 2026 12:30:00 PM IST
14 Oct, 2026 8:30:00 PM IST
NIT NO: 182/PWD/Zone-9/2026-27 RAIPUR DATED: 13/10/2026
नवीन आंगनबाडी निर्माण मोवा (मस्जिद के पास) (वार्ड क्र. 11 डॉ. भीमराव अंबेड़कर वार्ड)
11250.00 INR
Fixed Deposit Receipt (OFFLINE)
2
30 Oct, 2026 5:30:00 PM IST
AS PER NIT
AS PER NIT
AS PER NIT
0.00 INR
15d 0h 35m
12 documents required · 9 mandatory · 3 optional
₹0
₹11,250
14 Oct 2026
14 Oct 2026
2 Nov 2026
14 Oct 2026
30 Oct 2026
OFFICE OF THE MUNICIPAL CORPORATION RAIPUR (C.G.)
Zone No- 09 (BOQ)
कार्य का नाम - डॉ. भीमराव आंबेडकर वार्ड-11 अंतर्गत आंगनबाड़ी निर्माण कार्य -मस्जिद के पास, मोवा जिला -रायपुर |
S. SOR CODE Description and details of work Qty. UNIT
1 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 19.96 CUM.
1A 16.30 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
16.3.3 In cement mortar. 30.12 cum.
2 1.10 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.
1.1.1 In all types of soils. 46.948 CUM.
3 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 17.08 CUM.
4 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 70.34 SQM.
5 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 36.90 CUM.
6 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
3.12.2 Thermo-Mechanically treated bars FE 500D 5774.14 kg.
7 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 12.79 CUM.
8 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete 55.07 CUM.
9 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 41.49 CUM.
10 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 41.49 CUM.
11 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 0.64 CUM.
12 7.9 Half brick thick (9cm) brick masonry with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level:
7.9.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) 9.18 SQM.
13 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes 221.02 SQM.
14 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 567.96 KG
15 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:
11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 329.46 SQM.
16 11.2 Providing and making 12mm thick cement plaster of mix:
11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 201.62 SQM.
17 2.14 Edge of slab, breaks in floor and walls upto 200mm. 60.55 METRE
18 11.2 Providing and making 12mm thick cement plaster of mix:
11.2.2 In Cement Mortar 1:4 (1 cement : 4 fine sand) 8.32 SQM.
19 12.13 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.
12.13 Size 600x600mm 77.87 SQM.
20 11.1 Providing and making 6mm thick cement plaster of mix:
11.1.1 In Cement mortar 1:3 (1 cement : 3 fine sand) 14.31 SQM.
21 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 8.75 SQM.
22 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete 351.58 SQM.
22A 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 351.58 SQM.
23 14.16 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
14.16.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 239.56 SQM.
24 14.19 Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including priming coat with epoxy primer, preparation of surface, etc. complete. 41.90 SQM.
25 11.1 Providing and making 6mm thick cement plaster of mix:
11.1.1 In Cement mortar 1:3 (1 cement : 3 fine sand) 13.50 SQM.
26 10.63 Providing and fixing 97mm thick Gypsum board partition upto ceiling height consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120, consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.55mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm diameter 40mm length and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing of 450mm centre to centre and fixing of boards to either side of frame work by 25mm dry wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to center and 97mm thick Gypsum board which includes one layer of tapered edge 12.5mm thick Gypsum plaster board (conforming I.S. 2095-1982) screw fixed with 25mm screws at 300mm centre to centre to either side, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer suitable for board as per manufacture's specification and Direction of Engineer-in-charge all complete. 125.00 SQM. 10 E
27 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) 500.00 litre
Note: Rates as per PWD, SOR (Building Works) 01-01-2015
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.02 MB
102389733719636284_190746_587376915350286324_181634_Affidavit format.doc
NIT • 0.05 MB
2270533856819043254_186337_Form A.pdf
NIT • 0.19 MB
4232717616596634884_201592_anganbadi Masjit (2nd CALL).docx
NIT • 0.03 MB
5246641361302269344_201592_anganbadi masjid.xlsx
BOQ • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .