Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹23.4 CrAccepted-AOC ERODE 638 002 | ₹23.4 Cr | L 1 | Accepted-AOC Lowest One work order issued on 25.11.2023 |
| 2 | L 2₹23.7 CrRejected-AOC | ₹23.7 Cr | L 2 | Rejected-AOC Second Lowest Unsuccessful tenderer EMD amount to be refund |
| 3 | L 3₹25.0 CrRejected-AOC CHENNAI 600 095 | CHENNAI | TAMIL NADU | 600001 | ₹25.0 Cr | L 3 | Rejected-AOC Third Lowest Unsuccessful tenderer EMD amount to be refund |
| 4 | L 4₹25.0 CrRejected-AOC | ₹25.0 Cr | L 4 | Rejected-AOC Fourth Lowest Unsuccessful tenderer EMD amount to be refund |
| 5 | L 5₹26.5 CrRejected-AOC | ₹26.5 Cr | L 5 | Rejected-AOC Fifth Lowest Unsuccessful tenderer EMD amount to be refund |
Tender Value
₹27.9 Cr
EMD Value
₹14.1 L
Closing Date
28 Oct 2023, 6:00 pmClosed
Superintending Engineer South Circle TNPHC Ltd
Tamil Nadu Police Housing Corporation Limited South Circle No 1 Inspector Quarters TSP VI Battalion campus New Natham Road Madurai 625014
Construction of 100 Nos. of PC/HC quarters (Stilt Plus 10 Floors) with development works at BRYANT NAGAR in Thoothukudi District
2023_TNPHC_378688_1
SE/SC No.39/2023-2024-2
Open Tender
Civil Works
335 days
BRYANT NAGAR IN THOOTHUKUDI DISTRICT
Refer tender document
9 documents required · 9 mandatory
₹0
₹14.1 L
25 Nov 2023
14 Oct 2023
30 Oct 2023
14 Oct 2023
28 Oct 2023
14 Oct 2023
Amount
1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
13.1) Filling with excavated earth
21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
b. T.W. below 2.00 m length.
23.3) Supplying and fixing of Magnetic door catches
25) Supplying and fixing of MS hold fast
30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)
31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
37.1) White washing 3 coats (slaked)
39) Supplying and fixing of MS Grills in position
40) Painting 2 coats - New "wood work"
41) Painting 2 coats - New "iron work"
46) Supplying and fixing of 20 mm dia Alu. Hanger Rod
47) Supplying and fixing of Alu. Towel rail 75 cm long
48) Supplying and fixing of 5 pin Coat stand
49) Supplying and fixing of Chromium plated 8 gauge picture hook
50.3) Supplying and planting avenue trees
50.4) Providing Tree guard
52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials c. 20 mm dia
52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)
53.3) Supplying and fixing of C.I. steps (5 Kg)
Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket
72) Supplying and fixing of Box type Fibre Fan hook
74) Charges for assembling and fixing of ceiling "Fan"
76) Supplying and fixing of 8 SWG G.I. wire
78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
86) Providing Pre-constructional Anti termite treatment
238) Anticorrosive treatment for steel grills
Annexure 2.1.1) Supplying and filling the basement with gravel
2.1.3) Supplying and filling in foundation and basement with Crushed stone sand
3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand
3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand
4.5.1) Standardized Concrete mix M30 Grade using crushed stone sand with Admixture a. In Foundation and basement
6.7.1) Brick work in C.M. 1:5 (F& B) using fly ash bricks of size 23x11x7cm using crushed stone sand with Admixture
8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Nineth Floor
k. In Tenth Floor
l. In Eleventh Floor
9.7.1) Brick work in C.M. 1:6 using fly ash bricks of size 23 x 11 x 7 cm using crushed stone sand with admixture a. In Stilt / Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Ninth Floor
k. In Tenth Floor
l. In Eleventh Floor
10.7.1) Brick partition wall in C.M. 1:4 using fly ash bricks of size 23x11x7 cm 110 mm tk (B.P.) using crushed stone sand with admixture a. In Foundation and Basement
b. In Stilt / Ground Floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
g. In Fifth Floor
h. In Sixth Floor
i. In Seventh Floor
j. In Eighth Floor
k. In Ninth Floor
l. In Tenth Floor
11.7.1) Brick partition wall in C.M. 1:4 fly ash brick of size 23x11x7cm 70 mm tk (B.P.) using crushed stone sand with Admixture a. In Stilt / Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Ninth Floor
k. In Tenth Floor
12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Nineth Floor
k. In Tenth Floor
l. In Eleventh Floor
m. In Twelveth Floor
n. In Thirteen Floor
14.2.1) Precast Cupboard slab 40mm tk in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement
15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Ninth Floor
k. In Tenth Floor
15.2.1) Cuddapah Slab 40mm tk. for cupboard slab / Similar works a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth Floor
j. In Ninth Floor
k. In Tenth Floor
16.2.2) Precast Jally ventilator 50mm thick using standardised concrete mix M30 Grade using crushed stone sand a. In Ground Floor
18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c. For Square and rectangular columns and small quantities
d. For Vertical wall
f. For Curved Surface
21.5.2) Supplying and fixing of soild UPVC door shutter with frame
21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes
21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 30 Grade using crushed stone sand with Admixture a. 900 x 2100mm
22.9) Solid core TW flush door with Teak ply on both sides and TW lipping alround Single leaf shutter Suitable for door of size a) 900 x 2100mm
23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2100mm
26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture
29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand
33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture
34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture
35.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand
35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture
36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border
b. 75 mm wide Border
c. 50 mm wide Border
38.4.2) Two coat of wall patty for ceiling
38.6) One coat of Primer paint
43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit
b) Augering 30cm dia
44.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)
50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand with Admixture
52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia
b. 25 mm dia
52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia
53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")
54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)
54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)
56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand
56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand
56.4.3) Supplying and applying of water proofing 3mm thick APP (Atactic Poly Propylene) Membrance in Toilet sunken portion of approved quality by means of gas torching, over the one coat of bitumen primer
57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia
58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.
59.5.2) Supplying and fixing of Gully Trap using crushed stone sand
60.1) Supplying and fixing of PVC Nahani trap (4way/2way)
64.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) a. Light point with ceiling rose
b. Light point without ceiling rose with bakelite battern holder
c. Calling bell point with Buzzer/Calling bell
65.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Fan Point
66.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Staircase Light Point.
67.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point PVC box (Fire Retarded Box) Switch Board Itself.
68.2.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for 5 amps 5 pin plug socket point at Convenient Places.
75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
87.1) Supplying and fixing of Three Phase ELCB/RCCB
99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1000 x 2100mm
100) Supplying and fixing of 9 watts LED Bulb
101) Supplying and fixing of 25 watts LED with street light fittings
102) Supplying and fixing of 4'18 watts crystal LED tube light fittings
103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb
104) Supplying and fixing of 12 watts LED bulb
112.1) Supplying and fixing of Exhaust Fan 225mm dia
119) Supplying and delivery of 7.5 HP open well submersible pumpset three phase Duty - 75 lpm x 125m
119.1) Supplying and delivery of 3 HP open well submersible pumpset three phase Duty - 175 lpm x 50m
120) Labour charges for the erection of 7.5 HP submersible pumpset in openwell
120.1) Labour charges for the erection of 3 HP submersible pumpset in openwell
121.1) Supplying and delivery of star delta starter confirming to IS 13947 three phase panel board
121.2) Supplying and delivery of Direct online starter three phase panel board
122) Supplying and fixing of following dia of the GI & GM specials a) 80mm dia GM Butterfly valve
b) 80mm dia GM Non Return valve
c) 65 mm dia GI Union
d) 65 mm dia GM Wheel valve with Brass
e) 40mm dia GI Union
f) 65mm dia GM Gate valve
123) Supplying of PVC insulated and sheathed flat type copper L.T cable a) 3 core 6 Sqmm PVC insulated and sheathed copper cable
b) 3 core 4 Sqmm PVC insulated and sheathed copper cable
123.1) Labour charges for laying of 3 core 6 Sqmm & 4 Sqmm PVC insulated and sheathed flat type copper cable
125) Supplying and fixing of following dia UPVC pipes including cost of labour charges below Ground level a) 80mm dia UPVC pipe
b) 65mm dia UPVC pipe
c) 40mm dia UPVC pipe
127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump
Numbering and lettering arrangements 129) Supplying and fixing of Aluminium TNPHC Emblem of 30" height
130) Supplying and fixing of Aluminium letters of 12" height
130.1) Supplying and fixing of 5" dia plastic foam plate of 3mm thick with 3" height number
130.2) Supply and fixing of 24"x8" size plastic foam name plate with vinyl cutting letter
130.3) Supply and fixing of 8"dia plastic foam plate of 3mm thick with 3" height number
130.4) Supply and fixing of 20"x5" size plastic foam name plate with vinyl cutting letter
130.5) Providing scaffolding casurina props 10 to 13mm dia 75cm c/c work for Aluminium Emblem fixing work including material cost and labour charges
130.6) Supply and run of 2 of No.8 copper wire for earth connections from earth pit to panel board
139) Supplying and delivery of "Godrej Nav-tal Ultra XL+" lock
144) Supplying and fixing of CP shower arm with over head shower rose
145) Supplying and fixing of CP two way bib cock with health faucet
146) Supplying and fixing of 20mm CP concealed stop cock
147) Supplying and fixing of PVC corner beeding
238.1) Anticorrosive treatment for window grills
344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
367) Providing wooden melamine polish for main door new wood work
378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand
379.6.1) Supplying and fixing of Granite tile of size 2'x1', 10mm tk (Jet black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a) In First Floor
b) In Second Floor
c) In Third Floor
d) In Fourth Floor
e) In Fifth Floor
f) In Sixth Floor
g) In Seventh Floor
h) In Eighth Floor
i) In Ninth Floor
j) In Tenth Floor
379.6.2) Supply and laying of Granite tile of 10mm thick (wall cladding) in CM 1:2 including cost of materials, labours etc., all including (Sinthetic grey, Paradise and similar varieties) for Lift
383) Supplying and fixing of Cuddappah sink 600x600x200 mm
383.2) Providing single nosing to the edges of granite tiles
448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia
Sinking well 515) Sinking well in loose soils, light black cotton soil, sandy loam and ordinary soil under water including bailing or pumping charges, if necessary etc a) First depth of 2.00m
b) Second depth of 2.00m
c) Third depth of 2.00m
Genset arrangements 516) Supply, Installation, testing and commissioning of 160 KVA Diesel Generator set complete with all accessories
517) Insulation for the residential silencer (Supply of residential silencer is included under item for DG sets)
518) Supply and installation of of MS cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator
EXHAUST PIPE 519) Supply and instalaltion of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
521) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool
522) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry
523) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA officials and obtain safety certificate from them for commissioning the DG set
Cabling and End Termination 524) Supply and laying of XLPE, aluminium conductor 1.1 KV grade armoured, MV cable a) 3.5 core 185 Sqmm aluminium cable
525) Supply and fixing of Brass cable gland for XLPE armoured LTUG cable with earth connection a) 3.5 core 185 Sqmm Aluminium cable gland
526) Supply and providing of cable end termination of XLPE armoured LTUG Aluminium cable a) 3.5 core 185 Sqmm Aluminium cable termination
527) Plate earthing with copper plate of size 600x600x3mm as per ISI specification with an earth electrode of 2.10m of 'B' class GI pipe
528) Providing and fixing of 25mmx3mm copper strip on surface or in recess for connections as required
529) Providing and fixing 25mmx6mm copper strip on surface or in recess for connections as required for alternator neutral
Lift arrangements 549) Design, Supply, Delivery, Installation, Testing and Commissioning of service Lift of capacity 26 persons / 11 Floors / 11 stops / Stainless steel (1.5mm) car cabin
549.1) Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift of capacity 13 persons / 11 Floors / 11 stops / Stainless steel (1.5mm) car cabin
549.2) Comprehensive servicing and maintenance of Lift for further period of 2 years beyond free warranty period of 1 year from the date of commissioning of Lift will be paid at the rate of 5% of capital cost of Lift
550) Supplying, fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess including interconnection painting etc., a) 40 A TPN 10 KA MCB
b) 10/20/32 A DP MCB
c) 63A TPN MCB
550.1) Supply and fixing of 25mmx3mm tin coated copper flat on wall with necessary supports for termination of earth connection in the Lift machine room
550.2) supply and fixing of UG cables on walls / ceiling charges for conveying and fixing of UG cables of following sizes with necessary MS clamps, brass screws a) 3.5 core 25 Sqmm cable
b) 2 core 10 Sqmm cable
550.3) Supply and fixing the following Aluminium Crimping Lugs suitable for the UG cable a) 3.5 core 25 Sqmm cable Crimping lugs
b) 2 core 10 Sqmm cable Crimping lugs
550.4) Supply and fixing the following Aluminium cable Gland suitable for the UG cable a) 3.5 core 25 Sqmm cable gland
b) 2 core 10 Sqmm cable gland
Supply and clamping of control cables 564) Supply and clamping of 4 core 2.5 Sqmm PVC sheathed and armoured copper cable from alternator to the propsed DG panel on wall / in the hume pipe with necessary glands and crimping at both sides
565) Supply and erection of 200 Amps capacity floor mounting panel board (Cubical type) with bus bar Chamber
796) Two coat of Plastic emulsion paint including primer for inner wall
796.1) Two coat of Exterior emulsion paint including water based primer liquid for outer wall
P GANGADARAN
PTM PROJECTS PVT LTD
M J ENGINEERING CONSTRUCTION
SRI RAMANA BUILDING CONSTRUCTIONS PRIVATE LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid