GE (AF)/SGR-62/2025-26 REPAIR TO TOILETS, FLOORING, INTERNAL PAINTINGS, PLINTH PROTECTION, TILING, PLUMBING, SANITARY FITTINGS AND OTHER MISC CONNECTED WORKS AT NO. 2 BILLETS AREA UNDER GE (AF) SRINAGAR

Amount

Schedule 'A' Part-I (B/R Work)

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10 to 12 mm thick 3D exterior wall tiles in stone /bulging/ approved shade from meteor series/ matt finish as approved, area of each tile exceeding 0.08 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in matching coloured polymer cement based grout to match over and including 10 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for Glazed ceramic tile 450x 300 x 06-7mm thick (coloured) on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level), complete all as specified and directed.

M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

S&F chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded glossy finish, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick perforated particle board for insulation and accoustics purposes , 60 cmx 60 cm size as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

S&F 6mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / aluminium framework with screws including putty to receive finishes, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 125mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 125mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

S&F 140mm floor door stopper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed.

M&L for 20-25mm thick Machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

S&F in repairs 75mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp or laid in trenches, complete all as specified and as directed.

S&F in repairs 110mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp or laid in trenches, complete all as specified and as directed.

S&F 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed.

S&F 75mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 110mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) 'P’ trap complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (using old size bricks) straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:4, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel work in Plates (plain or chequerred ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (gde-E-250) Quality A, complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm size wash hand basin mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces on brick or concrete surfaces in CM 1:4, fair finished the surfaces even and smooth without using extra cement including scaffolding upto 12m height, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting, on plastered surface preparatory to distempering , complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 12m height, complete all as specified and directed.

S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F in repairs for 20mm bore tubes, medium grade, galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flangedend bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed.

S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed.

S&F in repairs looking mirror of size 600x450mm with PVC moulding, complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed.

S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, two way, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges, complete all as specified and directed.

S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed.

Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed.

Preparation of old plastered / unplastered old decorated surfaces of ceiling, cornices by brooming down or steel brushing, scraping down smoke. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper (OBD), complete all as specified and directed

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed.

Preparation of old plastered surfaces of wall by washing down, brooming down or steel wire brushing etc. and applying one coat cement base paint including scaffolding up to 15m height, complete all as specified and directed.

Schedule 'A' Part-II (E/M Work)

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed.

M&L for Point wiring for one light / fan point / exhaust fan controlled by one way switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FRLSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0mm thick and minimum 20mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment, provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches / sockets / regulator etc., including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly, complete all as specified and directed. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately

All as per Ser item No 72.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on same board.

All as per Ser item No 72.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on independent Board.

All as per Ser item No 72.00 here in above but light / fan point controlled by two way switch 6 amps 240 volts

All as per Ser item No 72.00 here in above but bell point controlled by one bell push switch 6 amps 240 volts

All as per Ser item No 72.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 Amps power point.

S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed.

S&F Modular switch 2 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed.

S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed.

S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed.

S&F modular Socket 6 Amp, 230 volts, 5 Pin universal, 2 Module, complete all as specified and directed.

S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed.

S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed.

S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed.

S&F in repairs lamp holder / batten holder Polycorbonate type with back plate suitable for batten fitting including supply & fixing of 10 Watt retrofit lamp, complete all as specified and directed.

S&F in repairs 18/20 Watt (White/warm white) LED baton fitting 4 feet length including drivers having energy consumption, 230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed.

S&F in repairs 9 Watt light fitting bulk head luminaries with lamp holders etc. complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ, complete all as specified and directed.

S&F in repairs 10/11 Watt (White/warm white) LED baton fitting 2 feet length including drivers having energy consumption, 230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed.

S&F in repairs building security light LED 25 Watt with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8m bent two shape including FI clamps nut bolts etc.), complete all as specified and directed.

S&F sheet metal enclosure epoxy powder coated or polysterene insulated material double door type, vertical triple pole & neutral (VTPN) 4 Way with in built MCCB 125Amps ICs=ICu, 415 volts with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 8 way single pole & neutral suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 12 way single pole & neutral suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed.

S&F in repairs MCB triple pole and neutral ISI marked, C series, working on 415 volts 50HZ AC supply for incoming and outgoing controlling system capacity 63 Amps, 10 KA breaking capacity, complete all as specified and directed.

S&F MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'C' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40 Amps 10 KA breaking capacity etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed.

S&F in repairs metal clad plug & socket board single pole and neutral enclosure with 3 pin and earth plugs and socket complete with two pole 20 Amps MCB, 415 Volts, C type, complete all as specified and directed.

S&F in repairs metal clad plug & socket board triple pole and neutral enclosure with 3 pin and earth plugs and socket complete with one triple pole MCB 32 Amps, 415 Volts, C type, complete all as specified and directed.

Sub main wiring with three runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.

Sub main wiring with three runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed. Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1,06,980.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S Abdul Ahad Rather (BID ID -3501723)

M/S FAROOQ AND SONS (BID ID -3500796)

M/S GHULAM MOHAMMAD AND CO. (BID ID -3501591)

M/S SA INFRATECH (BID ID -3507912)

M/S TARIQ AHMAD SHEIKH (BID ID -3507561)

M/S GULZAR ENTERPRISES (BID ID -3501684)

M/S M.R. Construction (BID ID -3500770)

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3501404)