Renovation, Repairing and Painting of Type-II quarter at Samdong Colony, Teesta-V

Amount

Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete.

Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. :For thickness of tiles 10 mm to 25 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling of CI Water Pipe Line (Dismantling of CI water pipe line 600 mm dia including disposal with all lifts and lead upto 1000 metres and stacking of serviceable material and unserviceable material separately under supervision of concerned department)

Cement Concrete: (cast in situ):Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.: 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size)

Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 0mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. : Size of Tile 600 x 600 mm

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and Providing and painting on G.S. sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface.

ENAMEL PAINTS-Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface.

Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.: 100 mm dia. PRINCE / SUPREME or equivalent soil pipe

Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.: 75 mm dia. PRINCE / SUPREME soil Pipe

Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes.: 100 mm dia. Supreme / Prince

Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes.: 75 mm dia. Supreme / Prince

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall : 15 mm nominal outer dia Pipes

Providing and fixing European One Piece 67x 35x75cm Cat no:92072(pastel) HINDWARE or equivalent, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL): Angular Stop Cock 15 mm Dia.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) : Bib Cock 15 mm Dia.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) : Bib Cock Long body 15 mm Dia.

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP rass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE:One wash basin with one pillar cock.: (63 cm x 45 cm)

Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete.

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.(Size -600x450mm)

Providing, fitting of chromium plated soap dish with necessary screw etc all complete.

Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. : 32mm

Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Providing and fixing bright finished brass helical door spring (superior quality)

Providing and fixing Tower bolt 200x100mm with necessary screws etc complete.:MS

Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete.: 150x31x4mm

Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.:MS

Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin- Charge. : With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.: With 2nd class teak wood beading 62X19 mm

Printing New Letter and Figures of any Shade:Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade:English and Roman

Chandra Bahadur Chettri