GE U(N) 41 2022 23 SPECIAL REPAIR TO BUILDING NO P15 P16 IN COOK HOUSE AND IN NP15 NP16 NP17 OF SUB AREA UNDER GE (N) UDHAMPUR

Amount

M&L for taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each with shutters (Without taking off shutters from the frames) complete all as specified and as directed by Engr in charge

M&L for taking down Chowkats or frames not exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed by Engr in charge

M&L for taking down shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and as directed by Engr in charge

M&L for providing and fixing powder coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprane gasket required (fitting shall be paid for seprately) with extruded built up standard tubular section /appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastner of required dia and size, including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminiums section shall be smooth ,rust free,straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beedingfor glazing/panneling,CP brass / stainless steel screws all as complete as per architectural drawing and the direction of Engineer-in-charge.

S & F glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified and as directed by Engr in charge.

S & F anodised aluminium grill ( anodised transparent or dyed to required shade according to IS: 1868 with aminium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requiremnet and direction of Engineer-in-charge.

S & F stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws all as specified as directed by Engr-In-Charge.

M&L for Granite stone slab window cills incl bull nosing rounding edges as directed of approved colour, 18 mm thick machine cut,as in cills/skirting/ dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 10mm thick rendering in CM 1 :3 complete all as specified and as directed. (window cill shall be in one piece)

S&F 105x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,incl PCC (1:3:6) filling in hollow back portion etc., complete all as specified and as directed by Engr in charge.

S&F 125x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,incl PCC (1:3:6) filling in hollow back portion etc., complete all as specified and as directed by Engr in charge.

S & F 35 mm thick flush door shutter, solid core construction with block board and decorative prelaminated face panels (as per sample kept in GE office) on both faces complete all as specified and as directed by Engr in charge.

M&L for 35 mm glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engr in charge.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and as directed by Engr in charge.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr in charge.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr in charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engr in charge.

S&F Small fittings 1st class hard wood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed by Engr in charge.

M&L for two coat of synthetic enamel paint on wooden surfaces over a coat of primer including preparation of new surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed by Engr in charge.

M&L for one coat of synthetic enamel paint on wooden surfaces over a coat of pink primer including preparation of old surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed by Engr in charge.

M&L for two coat of synthetic enamel paint on wooden surfaces over a coat of primer including preparation of old surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed by Engr in charge.

M&L for demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles complete all as specified and as directed by Engr in charge.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed by Engr in charge.

All as above Si no 23 , but except brickscomplete all as specified and as directed by Engr in charge. Note-Old bricks obtained against dismantling shall be used complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed by Engr in charge.

M&L for rendering 15 mm thick in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortor 1:6 other than fair faces of brick work or concrete surfaces complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed by Engr in charge.

M&L for preparation of plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer on new surfaces with alkali resistant primer paint complete all as specified and as directed by Engr in charge.

M&L for two coats of cement base paint over a coat priming plastred and other surfaces with alkali resistant primer paint including preparation of old plastered of wall complete all as specified and as directed by Engr in charge.

M&L complete removal of existing treatment, preparation of plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer including 2 to 3 mm thick exterior wall care putty ( to be applied in two coats) all as specified.Note: Putty surface shall be rubbed with emery paper to form even and smooth surface complete all as specified and as directed by Engr in charge.

M&L for ,preparation of surfaces plastered or unplastered new surfaces and applying two coats of oil bound distemper over a coat of chalk whiting preparatory to distempering and including 2 to 3 mm wall care putty complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for complete removal of existing treatment and preparation of surfaces plastered or unplastered old surfaces and applying two coats of oil bound distemper over a coat of primer preparatory to distempering and including 2 to 3 mm wall care putty rubbed with emery paper to form smooth surface complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr in charge.

M&L for 50 mm thick plain cement concrete type C-1 1:3:6(Using 20mm graded crushed stone aggregates) as in plinth protection/levelling course finished fair and even without using extra cementcomplete all as specified and as directed by Engr in charge.. Note : The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover and MS Grid framecomplete all as specified and as directed by Engr in charge. by Engr-in-Charge

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

S&F false ceiling boards of Fibre Cement Designer tile white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mmx1220mm/1195mmX595mm/1220mmX610mm and any one of the design (occeanic , lake & hill, cascade or electra) fixed with screws over existing metal grid including required cutting/ making opening for services like fixed over existing grid inluding necessary scaffolding etc and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engr-in-charge.

All as per Srl item no 38 above but only removing and refixing existing board on existing metal grid complete

Supplying and fixing in repairs grid frame suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 605 mm X 605 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixtures all complete at all heights as per direction of Engineer-in -Charge in patch work.

M&L for preparation of old steel and iron surface of any description, not otherwise described, over 10 cm width or girth applying two coat of Aluminium paint and over coat of aluminium red oxide priming with any shade as approved all as directed and specified.

S&F stainless steel curtain rods with brackets fixed to wall with suitable/ brackets screws and onion type end stopper all as per approved design fixed complete all as specified and as directed by Engr in charge.

M&L for demollition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed by Engr in charge.

S & F reflective ceramic cheaquered finish tiles 30 cm X 30 cm X 10-12 mm thick, with grey cement and pigments, set, jointed over 15 mm thick screed bed in CM 1:4, and pointed in neat cement slurry in floors complete all as specified and as directed by Engr in charge.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge

M& L for providing precast cement concrete kerb stone type B1 1:2:4 (20mm gradded aggregate) of vany section as indicated with plain fair faces including champers, weathering,throating and setting in cement mortar 1:4 complete with joints to match complete all as specified and as directed by Engr-in-charge

M& L for RCC type B-1 1:2:4 ( Nominal mix ) 20 mm graded agg as in chajja slab etccomplete all as specified and as directed by Engr in charge. by Engr-in-charge.

M& L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-charge

M& L for plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in coping/benching, bed plate including necessary form work complete all as specified and as directed by Engr-in-charge

M& L for dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr in charge.

M&L for non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 10 mm screed bed 1:4 cement mortar complete all as specified and as directed by Engr in charge.

M&L glazed ceramic tiles 300x450x7 mm to 8mm thick in vertical surfaces such as skirting, dadao and risers to steps over 10 mm thick in CM(1:3) incl taking down from existing surfaces complete all as specified and as directed by Engr in charge. complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 10 mm screed bed 1:4 cement mortar complete all as specified and as directed by Engr in charge.

M&L for machine pressed precast conrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and inclusive 50 mm thick sand filling complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for dismantling wall paneling (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all as specified and as directed by Engr in charge.

M&L for 5mm thick (HL Series) lnsulated PVC Wall Lining honeycombed consisting of PVC Insulated Panels (As per approved by GE) with approved design & pattern duly fitted into the wall including PVC angle Jointers, U jointers, beading etc as required at the edges including removing and re-fixing electric boards & plates and covered with PVC strips or beading after fixing wall paneling ,complete all as specified and as directed by Engr in charge.

S&F in reapirs 25 mm dia MS powder coated antique type curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed as directed in Engr-in-Charge.

M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed by Engr in charge.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps, all as specified and directed by the Engr-in-charge.

All as per Srl item No.61 above but as in refixing only with stack clamp to wall complete all as specified and as directed.

S&F110 mm bore PVC (SWR) bends with access door any radius, all as specified and directed by the Engr-in-charge.

M&L for dismantling of Asbestos cement/ Galvalume (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr in charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet thickness to be checked should be 0.50 mm (TCT) thickness and coating shall be AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws minimum 03 Nos screws over each sheet. complete all as specified and as directed by Engr in charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Profile steel sheet 0.50 mm (TCT) thickness and coating shall be AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed by Engr in charge.

M&L for dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed by Engr in charge.

S&F 18/19 mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with crews to timber frame work as in Cupboard, kitchen cabinet or similar work etc including provn of 6mm thick teak wood lipping alround the board/ shutter complete all as specified and as directed by Engr-in-charge

S & F 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F aluminium handles, cast type, anodised 100mm long complete all as specified and directed.

S&F 100 size hasp and staple, Aluminium Anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F magnet catchers 50mm steel plate MS body and striking plate incl letting in & fixed complete all as sp[ecified and directed.

S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen complete all as sp[ecified and directed.

S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge for modular kitchen complete all as sp[ecified and directed.

S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, for modular kitchen, complete all as specified for modular kitchen complete all as sp[ecified and directed.

M&L for dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. in any size/ section, in any position complete all as specified and as directed by Engr in charge.

M&L for dismantling framed trusses n.exc 10 m complete all as specified and as directed by Engr in charge.

S & F roof trusses (framed) , trussed , purline, cross gantries and fastening and heavy brakets framing (Beam, tee, angle,channel or flat section ) including distance pieces complete all as specified and as directed by Engr in charge.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut in any sizes complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and as directed by Engr in charge.

M&L for preparation of new surface of any description, not otherwise described, over 10 cm width or girth applying two coat of synthetic enamel paint over one coat of cement primer any shade as approved complete all as specified and as directed by Engr in charge.

M&L for preparation of old steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint (any colour) over preprimed surfaces, complete all as specified and as directed by Engr-in-Charge.

M&L for demolition of reinforced cement concrete in ground floors for levelling of and pavings not exceeding 15 cm thickness including floor finish complete all as specified and as directed by Engr in charge. by Engr-in-Charge

M&L for reinforced cement concrete,Design mix (M-25) concrete as in beams/bends supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and as directed by Engr in charge..

M & L for formwork to sides and soffits of floor or roof beam, beam haunching girders, bressum-mers, lintels cantilevers, shelves including supports,overhangs etc also splays between floors and beams, etc complete all as specified and as directed by Engr in charge..

M&L for TMT bars 8mm dia and over cut to length bent to shape required, including cranking binding spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and as directed by Engr in charge..

M&L for TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

M&L taking down and refixing shutters in same opening exceeding 1.00 sqm and not exceeding in 4.00 sqm each complete all as specified and directed by Engineer-in- Charge.

M&L for taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or takeing in schedule of credit and making good disturbed surfaces of walls, floors etc all as specified as directed.

M&L for dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or takeing in schedule of credit (Accessories or components to be provided free for replacement by department) complete all as specified and as directed by Engr-in-charge

M&L for taking down unserviceable / serviciable MCB DB's/AC's box to deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/ratingcomplete all as specified and as directed by Engr in charge. by Engr-in-charge.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less tham 20mmof 2mm wall thickness complete with all accessories including GI anealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm .(a) One light Point controlled by one,one way switch.

(b) One fan/exhaust fan/Air ciculator /bell point controlled by one way switch.

(c) All as per item No 90 above but 3 Pin 5 Amp Socket on the same board, complete all as specified and as directed by Engr in charge.

(d) All as per item No 90 above but 3 Pin 5 Amp Socket on independent board ,complete all as specified and as directed by Engr in charge..

All as per item No. 90 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.

S&F Two in one, 3 Pin, 5 Amps, flush type socket outlet complete all as directed by Engineer- in - Charge.

S&F Two in one, 3 Pin, 5/15 Amps, flush type socket outlet suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.

S&F in replaceent of MCB DB sheet enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic single door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 12 waycomplete all as specified and as directed by Engr in charge.

S&F MCB, single pole & neutral, 240 Volts 40 Amps,10KA B seriescomplete all as specified and as directed by Engr in charge.

S&F MCB, single pole, 240 Volts (06 to 32) Amps,10KA, B seriescomplete all as specified and as directed by Engr in charge.

Supply and fix LED light fitting 1x18 watt 220 V AC dacorative box type with driver holder, includin LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from cilling rose complete all as specified and as directed by Engr-in-Charge

Supply and fixing LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing complete all as specified and as directed by Engr in charge.

S&F in repair surface/recessed mounting LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directedcomplete all as specified and as directed by Engr in charge.

Taking down and fixing only ceiling fan/wall mounted fan after painting and Necessary repairs / servicing including replacement of hanging assambly , bush bearing , U/S capacitor, flexible copper cord three core PVC sheathed of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connection complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and as directed by Engr in charge.

M&L for earthing complete to pole with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified and as directed by Engr in charge. NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cost iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised earth strip 25x4 mm.

SupplyIing, laying / fixing and testing in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core in trenches /floor /pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and as directed by Engr in charge.

M&L for excavation in trenches in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting outcomplete all as specified and as directed by Engr in charge.

M&L for returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil complete all as specified and as directed by Engr in charge.

M&L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Engr in charge.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable complete all as specified and as directed by Engr in charge.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and as directed by Engr in charge.

M&L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and as directed by Engr in charge.

RAJ MOHD

M/S IMTESH BHAT

M/S GURU DEV BUILDERS

SAI RS ENTERPRICSES

SHIVAE CONSTRUCTION

KUMAR CONSTRUCTION CO

paras ram pachiala

ASHOK KUMAR PURI

RAMAN KUMAR