SPECIAL REPAIR TO BLDG NO P-69 (B/R) OF TRG BN OF THE GRENADIERS JABALPUR (M.P.) UNDER GE(WEST) JABALPUR

Amount

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including removal of debris to out side MD land complete all as specified & directed.

M&L 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even & smooth without using extra cement in patches all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M & L non- skid ceramic joint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, over and including 15 mm thick screed bed or bedding layer of mortar with CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, over and including 10mm thick cement mortar( 1:4) on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring, 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof, mixed with liquid water proofing compound as per Manufacturer's' instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ)

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparing new plastered or unplastered surfaces ofwall and applying three coats of white wash complete all as specified and directed.

M & L for rendering 10 mm thick in C:M 1:3 on Ceiling in patches, and finished even and smooth without using extra cement complete all as specified and directed

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete except bricks all as specified & directed. (Note : Serviceable bricks retrieved against dismantling shall be re-used)

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 40mm bore of pipe complete all as specified and as directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

Supply & laying of CPVC pipes 40 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

S & F Mild steel (1mm Thickness), plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed

Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply and fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply and fix 110mm bore PVC (SWR) bends of any radius, ISI Marked, provided with access door complete all as specified & directed.

Supply and fix 75mm bore PVC (SWR) bends of any radius , ISI Marked, complete all as specified & directed.

Supply & fix PVC (SWR) junction single, (single T), equal or unequal , 110mm bore complete all as specified & directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified & directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed.

S & F PVC (SWR) branch piece 110mm bore, single (single Y), equal or unequal ,complete all as specified and directed.

PVC (SWR) floor trap / Nahani trap with grating 75 mm dia including jointing with solvent cement complete all as specified and directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down Shutter of any description, exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary farmwork etc. complete all as specified and directed.

M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc., complete all as specified and directed.

M&L for pressed steel door frame size 105 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc.,complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet, reinforced with M.S square tube in opening including making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-22 complete all as specified & directed.

Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and Fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supply & fix 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supplying & fixing 150mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.d

S&F steel ventilator factory made with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed .

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed .

S&F galvanised MS wire cloth, 0.56mm nominal dia of wire, average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed .

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for 40 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F in Curtain rod mild steel, chromium plated with fixing brackets,stops, rollers etc. approved complete including side mounting Hardware including telescopic bracket modular type complete all as specified and directed.

S&F Stainless steel Bracket with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed .

S & Fin repair for Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete all as specified and directed.

S & Fin repair for Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed.

S&F in repair 15 mm concealed type stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed.

M&L for grinding and polishing surfaces of old Kota/marble/granite stone flooring, skirting etc by hand or grinding machine, dusting off the surfaces after grinding, washing and mirror polishing complete all as specified and directed by Engineer in Charge

S & F in repair vitreous china half stall urinal white including connection to flushing pipes and out going pipes & brackets etc complete all as specified and directed.

S/F in repair urinal spreader chromium plated for fixing with 15 mm bore pipe etc. complete all as specified and directed.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed.

S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and directed.

S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed.

S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed.

Supply & fix vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed.

Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.

M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 complete all as specified and directed.

M&L for machine cut cudappah stone slab as in cooking platform/ shelf , 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified & directed.

Complete removal of existing treatment on walls including steel wire brushing and scrapping etc and applying 2mm thick( Avg) wall care putty in two layers on wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes and applying two coat of distemper Oil emulsion white or tinted on new putty surfaces of wall complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scrapping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified & directed..

M&L for preparation of old surfaces of wall and applying two coat of distemper Oil emulsion white or tinted complete all as specified & directed..

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed.

M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing surfaces of sunken floor by brooming down or steel wire brushing and cleaning the surface with water and applying a coat of Rendercok HBF water proofing coating as per manufacturer's instructions over slab and sides of sunken complete all as required and as directed by Engineer - in - Charge at site.

M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land complete all as specified and directed.

M&L for 10mm thick rendering over roof surfaces in CM 1:3 , finished even and smooth without using extra cement complete all as specified & directed.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum side over lap of 100mm and end over lap of 150 mm shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm over non-accessible roof and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer as specified for polymeric water proofing membrane.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete, complete all as specified & directed.

M & L for formwork to chullah hoods,chajjas, troughs and similar items including edges etc., work in rough finished flat surfaces of concrete complete all as specified & directed.

M & L for RCC (Nominal mix) (1:1.5:3) Type A1 using 20mm graded aggregate as in roof beams, cantilevers, bressummers, lintels beam over 1.5m span complete all as specified & directed.

M & L for RCC (Nominal mix) (1:1.5:3) Type A1 using 20mm graded aggregate as in Chajjas etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M & L providing cement concrete(1:2:4) type B-1 (20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) Type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipes 150mm internal diametre (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M & L solid wall Double Wall Corrugated (DWP) PE Pipes, socketed drain pipes class SN-8, conforming to IS 16098 (Part-2) with 150 mm bore dia in 6m length including laying and jointing complete all as specified and as directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Schedule of credit amount of Rs 78,470.00 to be deducted during AOC

J.P ENTERPRISES

Sachdeva Enterprises

C L BHATIA

DEEPAK CONSTRUCTION

RAVI ENTERPRISES

Kirti Chandeliya and Assosicates

M/S Modern builders

M/s Ram Associates

Tiki Water proofing Co