Providing fencing from RD 14560/R to 15160/R and providing street light from RD 12260/R to RD 15160/R Gajjuwala Minor along village Bidhaikhera Distt. Fatehabad

Amount

Demolishing cement concrete manually /by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix)(HSR item No. 5.23.2)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil ( HSR item No. 4.12)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works up to plinth level ( HSR item No. 6.25.1)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. ( HSR Item No. 6.33.6)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.( HSR item No. 13.28)

Painting the wooden I metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. ( HSR iterm No. 11.82.1)

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts, earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge. 5 Metre Long pole with top dia 65 mm and bottom dia 130mm with base plate of size 250 x 250 x 16 mm ( HSR item No. 24.4.8.3)

Laying of underground cable in pipe /existing open/closed trench etc as, 300 sqmm to 400 sqmm 3 to 3½ Core ( HSR item No. 24.2.4.5)

Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 4.5 metres but up to the height of 7 metres.( HSR item No. 24.4.4.2)

32 mm dia, ISI marked, PVC conduit ( HSR item No. EL026)

Supply, carriage, erection, testing and commissioning of LED Hanging Light 30W with reflector. The fitting is to be hanged from the roof of the huts including making connection with PVC Cu wire 1.5 sqm from junction box. The work should be completed as per satisfaction of Engineer-in-charge/Architect. Wipro Make Cat. No. LH13-301-060 57-xx (32W)/VAK-IL-HYE P-INDUSS30 30 W/Lux Max Make Cat No. LUXMAX-HB-30 (40 WATT) or of make as approved in the department. Rate as per estimate sanctioned CE-BWSU I&W.R Deptt. Hry. PKL No. 551/6BWS/249/ 2018 Dt. 27.01.2020. ( N.S )

Pawan Kumar Contractor

LAL CHAND COMPANY

ASHOK KUMAR