SPECIAL REPAIR TO BLDG NO T-95 OF ENGR REGT IN OD COMPLEX UNDER GE (EAST) MATHURA

Taking down Chowkhats or frames not exc. 1.5 sq m each with shutters (without taking off shutters from the frames), complete all as specified & directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified & directed.

S&F factory made Pressed steel frame for doors of size 125 X 60 mm frabicated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

M&L for 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, both face covered with decorative face veneer withlipping/frame to match fixed with suitable adhesive, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Factory made solid panel PVC molded door shutter 28-30 mm thick (style)with 2 or 6 raised panneled desighned with 2mm thick moulded prelam pvc sheet on both face with partical board core as per specification & drawings.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing

S&F 100 mm long stainless steel hinge, type B-21, complete all as specified & directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified & directed.

S&F 150 mm long aluminium handles febricated type, complete all as specified & directed.

S&F 250 mm long aluminium alloy sliding door bolt , bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 300 mm, mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F factory made box type steel window with hung shutters both glazed and guaged shutter frame 60 x 25 mm ERW hollow 'P' section with wall thickness not less than 1 mm fixed to pressed steel frame 120 mm x 70 mm x 1.6 mm thick including fixing glazed portion, iron grills 8 mm squre MS Bar hunges with steel handle and fittingss lugs, tower bolt and steel peg stay etc complete with glazing bars, devotailed or welded complete with cooler opening all as specified complete all as directed by Engineer-in-Charge. Ref CEJZ Drg No TD/2004/93 sheet No 1 /3 to 3/3

S&F powder coated (minimum thickness and powder coating 50 micron) aluminium frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. complete all as specified and as directed.

S&F Powder coated aluminium frame Anodised aluminium window and ventilator shutters, side hung type without sash bars/fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

S&F aluminium decogrill of approved design made out mesh size not exc 50mmx50mm fixed to the window frame with CP brass /stainless steel screws including cutting and fixed with f channel/u channel all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified & directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing fixed to aluminium/ Steel/ wooden frame with rubber beading/ putty/ wooden beading as required area exc 0.5 sq. m in each pane complete all as specified and directed.

Supply & fix 3mm thick sheet glass panes ordinary quality n.exc 0.50 sqm each fixed to steel frame complete oil putty in square including steel pin complete all as specified and directed

M&L for anti termite treatment the soil along with internal wall and floor junction/external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, through approved applicator, as per manufcturer's instruction, complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed plaster in cement mortar (1:4) complete all as specified & directed.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete, all as specified and as directed.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm , in wall, dado / skitring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement motar 1:4 and finishing complete all as specified & directed.

Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete.

M&L for providing and fixing powder coated MS galvanised steel inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, fixed to angle iron truss with 2-3 mm GI wire with galvanised butterfly level clips for all hights complete all as specified and as directed.

M&L for 4 mm thick prepainted designer non-asbestos fibre cement building board and fixed on false ceiling grid with screws and including 10 mm wide disginer POP strip all round at the junction of wall and false ceiling complete all as specified and as directed by Engg.-in-charge.

S&F in repair PVC wall panelling with panel 300x 8-10 mm, hollow section, fixed white PVC plug and screw and inserted to next panel groove, edge and corners of all door / window / opening etc to be covered with PVC angle fixed including frame work all as per manufacturer's instruction complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar including removing rubbish out of the MoD land, complete all as specified & directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , floor, window/door cill etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl rounding off corners, mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish out side of MoD land, complete all as specified & directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for 75 mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate laid in panels not exc 3 m and providing grooves at corner finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels, complete all as specified & directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified & directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1 : 4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or stone masonry surfaces in cement plaster 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and fair on wall surfaces, complete, all as specified and directed .

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair complete, all as specified and directed

M & L for preparation of new/old surface including complete removal and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre & excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including 1-2 mm thick wall care putty and priming coat of exterior primer applied at 0.90 litre/10 Sqm over new surfaces upto tripple storey with fully utomatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per min having pressure 3300 PSI. Allow 6-8 hours to dry the surface of both coat of paint to achieve excellent application with 5 years perfomance warranty from manufacturers and instruction complete using limited man power including scaffolding, trestles, ladders, cradles and necessary safety measures for upto triple storey buildings, complete all as specified and directed.

M & L for complete removal of existing surface /new plaster surface and applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on old plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

Supplying and laying of 20 mm CPVC pipes outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20 mm bore of pipe GI medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. complete all as specified and as directed.

Taking down rainwater/sewage pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified & directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/wall complete all as directed and as specified.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors/wall complete all as directed and as specified.

S&F 110 mm dia PVC (SWR) bends any radius with oval access door complete all as directed and as specified.

S&F 75 mm dia PVC (SWR) bends any radius complete all as directed and as specified.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directed and as specified..

S&F in repair 75mm PVC floor trap plain with CP grating including jointing with solvent cement complete all as directed and as specified.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P' trap setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe & jointing to socket of flushing rim, complete all as specified and directed.

S&F in repair for counter sunk vitreous china wash hand basin white flat back size 550 x 400 mm , bracket including all suitable fixing arrangements, complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, half stall type, white , of size 375x390x590 with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair two way bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair Stop Valve/ angular cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed.

S & F in repair Low level flushing cistern 09 Ltr capacity dual flush type complete with float valve, syphon assembly etc complete. The colour of the cistern shall be as matching with the colour of the WC Pan

S&F in repair stainless steel Hand jet health faucet 15 mm bore with CP flexible tube 1.20m long with all connected fittings complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated over head shower (150 x 150 mm) square shape with 600 mm long arm complete complete all as specified and as directed.

S&F in repair swan neck Pillar taps, (Min wt - 500 gm), fancy type, long body swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair curtain rod stainless steel chromium plated 22-25 mm dia with bracket knobs including decorative finials all as approved complete all as specified and directed.

S&F in repair chromium plated tubular towel rail 20 mm dia type 'D', 600mm long between flanges fixed to wall complete all as specified.

Supply & fixing PVC connection 15mm size best quality with PTMT nuts 450mm long.

Dismantling old water tanks exc 500 & n exc 1000ltrs capacity and removing all as directed

S&F 750 Litre capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), WHITE COLOUR, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & wash out pipe etc including required dia of GI pipe, complete as specified in SSR Part-I.

S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.

S&F in repair Gun metal, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified

Dismentling timber scantlings 40 sq cm and over in section, in any position

M&L for roof trusses (Framed) tubular hollow pipes crane gantries, rails and fastenings and heavy brackets framing (Hollow tubular section, beam, tee, angle, channel or flat section) FE-290 Gd-165 including distance pieces, cleats etc complete all as specified and directed

Dismantling corrugated, semi-corrugated, etc., MS/AC sheets in roof covering of any type complete all as specified and directed by Engineer-in-Charge.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated/semicorrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheeting, 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) omplete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft loose soil ,complete all as specified and as directed.

Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil ,complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement conc 1:4:8 type D2 using 40 mm graded stone agg .,complete all as specified and as directed.

M&L for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge.

Supply and laying in repair 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-30 grade confirming to IS 15658-2006 locally available with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over minimum 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as specified and directed by Engr-In-Charge.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. ( Note: Credit for above items should be made as per credit Schedule separately)

Taking down carefully by submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed

M & L for Point wiring with 1.5 sqmm (nominal area) single core PVC insulated sheathed (FRLSH) cable, 1100 volts grade, multi-stranded copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20 mm dia med gd) and its all accessories complete concealed in wall and modular flush metal boxes with modular cover plates & frames for mounting modular switches, sockets, regulators etc. including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge, as described below item no 94-98:-

(a) One light point controlled by one switch 5 amp.

(b) One wall/exhaust fan point controlled by one switch 5 amp.

(c) One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

(d) One 5 Amp 5 pin socket outlet point on independent board with other switches including earth wire as specified.

(e) One bell point controlled by one push button.

All as per item No.93 here-in-above but for 3 pin/ 5 pin, sockets outlet,15 amps with 4.0 sqmm PVC insulated & unsheathed (FRLSH), multi-stranded copper condutor cable, independent, Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module .

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing Modular fan Regulator electronic step type complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete.

S&F Ding Dong Calling Bell

S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten

Supply and fix in repair ceiling rose surface bakelite 65mm x 50mm three terminals complete .

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED lamp, 9 watt, B-22 base complete.

S&F indoor decorative ultra slim surface/ wall mounted LED batten tube light fitting complete, 1x 20 watt with polycarbonate channel housing & integrated electronic driver, energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with pvc insulated pvc sheathed twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F indoor decorative ultra slim surface/ wall mounted LED batten tube light fitting complete, 1x 10 watt with polycarbonate channel housing & integrated electronic driver, energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with pvc insulated pvc sheathed twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) colour warm/white complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete.

Supply and install of 35W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified.

M&L for building security light bracket made out of 40mm dia light grade GI pipe

M & L for Sub Main Wiring for DB to DB with two runs single core 10 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(02 run 10 Sq mm single core cable, one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM).

All as per item No.116 here-in-above but for 4.0 sq. mm

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor. Note : old fan should be deposited in MES store.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers. Note : old fan should be deposited in MES store.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm. Note : old fan should be deposited in MES store.

Cutting holes for air ducting of exhaust fan in Circle / square shape or as per site

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one Single pole MCB 20 amp

M&L vertical load line distribution board factory made and tested made of sheet metal enclosure powder coated suitable for MCCB 63 A triple pole and neutral as incomer and outgoing MCBs, 4 way TPN with rated busbar 415 volts,neutral link, Blanking plates (Without MCCB/MCBs) IP 43 (double door type) ISI marked suitable for A Frame MCCB 63 Amp as incommer of Make: Havells Cat Pt No DHDLVDOBGSFE04 of Havells or its equivalents (Note MCCB Price should be measured and paid seperately)

Supply & fix in replacement of MCCB 63 Amps, breaking cap 16 KA, 3 Pole, 415V complete including taking down old MCCBs all as specified and directed.

S&F MCB distribution board, SPN 12 way, double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified.

S&F MCB distribution board, SPN 8 way, double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified.

S&F MCB SPN, 32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed.

S&F MCB SPN, 40-63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed.

S&F MCB SP, 6-32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed.

S&F MCB SP, 40-63 Amps, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed.

M&L for earthling complete with galvanized steel earth plate eletrode 60x60 cm x6.3 mm thick burred directly in ground (earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Metrs below normal ground level connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthling test point all as specified and indicated including testing on completion including excavation and arth work PCC pit & RCC pit over funnel with watering pipe wire mesh GI protection pipe etc complete.

All as item no 42 but for GI strip of size 25x4 mm

Supply installing commissioning & testing LT feeder piller panel board factory made, out door, cubical type, vermin proof, dust proof, water proof made out of 3.15 mm thick CRCA sheetand angle iron frame of size 50x50x6 mm inside depth not less than 50 cm and size suitable to accomodate the following accessories with insulated TPN Aluminium busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. both side openable (front & back) with locking arrangement duly painted with coat of synthetic enamel paint over a coat of red oxide primer both internally and externally and connecting with cable with lugs including internal wiring with copper cable of suitable size using lugs compressing the following accessories all as directed. (Notes : The rate quoted shall include for earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1:4:8), D2 filling in foundation the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board ) and Aluminium bus bar 250 Amps-04 Nos duly colour sleeved mounted on epoxy insulators-01 set.Note:Panel board shall be approved by CPRI and certificate to be produced and to be submitted in the office. incoming :- (a) MCCB 4 P, 415 Volt 125 Amps, 25KA, 50 Hz with fixed thermal and magnetic setting -01 No Outgoing :- (a) MCCB 3 P, 415 Volt 63 Amps, 25 KA, 50 Hz with fixed thermal and magnetic setting -03 Nos. (b) Multifunction Digital square type intelligent panel meter to measure voltage, current, frequency, & Power factor - 01 No (c) RYB Led indicator - 01 Set

Taking down carefully by XLPE cable/ service connection of any type

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

Supply, laying, jointing and testing of LT XLPE cable size 16 sqmm 4 core insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. Note:- HDPE pipe rate shall be deemed in quoted rate above.