COMPREHENSIVE REPAIR WORKS OF BR AND EM NATURE LIKE REPAIRS TO DG SHEDS PLINTH PROTECTION PCC REPAIRREPLACEMENT MAINT OF DG SETS WITH AND INCLUDING REPLACEMENT OF FUEL FILTER OIL FILTERAIR FILTER AND CALIBRATION OF NOZZLE SYSTEM AT NAVAL STN KARANJA

Notes : (i) ADDL TPP No 09 OF 2025-2026. (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

M&L for complete overhauling of DG set capacity 15 KVA to capacity 30 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring, etc including grinding polishing of crank shaft, head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as specified and directed (Note : Spare parts shall be measured and paid seperately under relevent items of BoQ here-in-after as Supply only)

Supply only piston assembly

Supply only piston ring set

Supply only full engine gasket

Supply only main bearing set

Supply only main cylinder liner

Supply only main cylinder head copper sleeves

Supply only lock nut

Supply only big end bearing

Supply only timing belt

Supply only benjo bolt

Supply only timing belt tension adjuster

Supply only inlet valve

Supply only exhaust valve

Supply only head gasket

Supply only oil pump assembly

Supply only thrust washer

Supply only crank case gasket

Supply only head nozzle plug set

M&L for complete overhauling of DG set capacity 62.50 KVA to capacity 110 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as specified and directed. (Note : Spare parts shall be measured and paid seperately under relevent items of BoQ here-in-after as Supply only)

Supply only piston assembly

Supply only piston ring set

Supply only full engine gasket

Supply only main bearing set

Supply only main cylinder liner

Supply only main cylinder head copper sleeves

Supply only lock nut

Supply only big end bearing

Supply only timing belt

Supply only benjo bolt

Supply only timing belt tension adjuster

Supply only inlet valve

Supply only exhaust valve

Supply only head gasket

Supply only oil pump assembly

Supply only thrust washer

Supply only crank case gasket

Supply only head nozzle plug set

M&L for complete overhauling of DG set capacity 125 KVA to capacity 200 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as specified and directed. (Note : Spare parts shall be measured and paid seperately under relevent items of BoQ here-in-after as Supply only)

Supply only piston assembly

Supply only piston ring set

Supply only full engine gasket

Supply only main bearing set

Supply only main cylinder liner

Supply only main cylinder head copper sleeves

Supply only lock nut

Supply only big end bearing

Supply only timing belt

Supply only benjo bolt

Supply only timing belt tension adjuster

Supply only inlet valve

Supply only exhaust valve

Supply only head gasket

Supply only oil pump assembly

Supply only thrust washer

Supply only crank case gasket

Supply only head nozzle plug set

M&L for complete overhauling of DG set capacity 250 KVA to capacity 400 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as specified and directed. (Note : Spare parts shall be measured and paid seperately under relevent items of BoQ here-in-after as Supply only)

Supply only piston assembly

Supply only piston ring set

Supply only full engine gasket

Supply only main bearing set

Supply only main cylinder liner

Supply only main cylinder head copper sleeves

Supply only lock nut

Supply only big end bearing

Supply only timing belt

Supply only benjo bolt

Supply only timing belt tension adjuster

Supply only inlet valve

Supply only exhaust valve

Supply only head gasket

Supply only oil pump assembly

Supply only thrust washer

Supply only crank case gasket

Supply only head nozzle plug set

M&L for complete overhauling of DG set capacity 500 KVA to capacity 750 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as specified and directed. (Note : Spare parts shall be measured and paid seperately under relevent items of BoQ here-in-after as Supply only)

Supply only piston assembly

Supply only piston ring set

Supply only full engine gasket

Supply only main bearing set

Supply only main cylinder liner

Supply only main cylinder head copper sleeves

Supply only lock nut

Supply only big end bearing

Supply only timing belt

Supply only benjo bolt

Supply only timing belt tension adjuster

Supply only inlet valve

Supply only exhaust valve

Supply only head gasket

Supply only oil pump assembly

Supply only thrust washer

Supply only crank case gasket

Supply only head nozzle plug set

M&L for maintenance and servicing of DG set of capacity 625-750 KVA including cleaning of DG set canopy, radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine, alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location.

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for maintenance and servicing to DG set of capacity 500 KVA including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for maintenance and servicing to DG set of capacity 400 KVA including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 200-250 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for maintenance and servicing to DG set of capacity 100-125 KVA including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for maintenance and servicing to DG set of capacity 62.5 KVA including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for maintenance and servicing to DG set of capacity 15-30 KVA including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location

TECHO CABLE

PRIMING PUMP

O RING

SUPER BYPASS FILTER WITH O RING

RADIATOR HOSE SET

CLAMP SET

AIR CLEANER HUMP HOSE

AIR CLEANER HUMP HOSE CLAMP

TURBO HUMP HOSE

TURBO HUMP HOSE CLAMP

VENT HOSE PIPE

Lub oil filter

FUEL PRE FILTER

FUEL MICRO FILTER

AIR FILTER PRIME

AIR FILTER SECOND

OIL TEMP. GAUGE

WATER TEMP. GAGUE

OIL PRESSURE GAUGE

Fan Belt

Uniball Joint

Thermostate

Hose diesel ( 7 Ft. )

Oil filter head gasket

RPM meter

M&L for attending emergency complaint on call basis by the contractor within 8 hrs of complaint lodging for 15 KVA to 625 KVA capacity DG set and repairs to DG set including carrying out minor repairs etc as required to make the system in order/ functional and complete all as specified and as directed. Note: Quoted rate is deemed to include for all the minor spares, nut bolt, cleaning cloth, grease etc. as required at site for making the system in order.

M&L for rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing for capacity 30 KVA DG set to 62.5 KVA DG set complete all as specified and directed

All as per BoQ Serial item No.279 above but for capacity 100 KVA DG set to 125 KVA DG set.

All as per BoQ Serial item No.279 above but for capacity 150 KVA DG set to 200 KVA DG set.

All as per BoQ Serial item No.279 above but for capacity 250 KVA DG set to 380 KVA DG set.

All as per BoQ Serial item No.279 above but for capacity 400 KVA DG set to 500 KVA DG set.

All as per BoQ Serial item No.279 above but for capacity 625 KVA DG set to 750 KVA DG set.

S&F water temperature guage including sensor and cable complete as per sample including removal of existing unserviceable gauge any type complete all as specified and as directed.

M&L for dismantaling the radiator for capacity of 50 KVA to 62.5 KVA DG set and taking to work shop for overhauling & cleaning, de-scaling with alkaline based chemical , removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads,hoses,clips, etc and refixing in its original position complete all as specified and as directed

All as per BoQ Serial item No.286 above but for capacity 100 KVA DG set to 125 KVA DG set.

All as per BoQ Serial item No.286 above but for capacity 150 KVA DG set to 200 KVA DG set.

All as per BoQ Serial item No.286 above but for capacity 250 KVA DG set to 380 KVA DG set.

All as per BoQ Serial item No.286 above but for capacity 400 KVA DG set to 500 KVA DG set.

All as per BoQ Serial item No.286 above but for capacity 625 KVA DG set to 750 KVA DG set.

M&L for repairs and calibration of FIP and injectors & to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etc for smooth functioning of FIP and refixing its original position including testing at site for capacity 10 KVA to 20.00 KVA DG set complete all as specified and as directed.

All as per BoQ Serial item No.292 above but for capacity 30 KVA DG set to 50 KVA DG set.

All as per BoQ Serial item No.292 above but for capacity 62.5 KVA DG set to 125 KVA DG set.

All as per BoQ Serial item No.292 above but for capacity 150 KVA DG set to 200 KVA DG set.

All as per BoQ Serial item No.292 above but for capacity 250 KVA DG set to 380 KVA DG set.

All as per BoQ Serial item No 292 above but for capacity 400 KVA DG set to 625 KVA DG set.

M&L for repairs/overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.

M&L for repairs/overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.

M&L for fabrication/Jointing/welding work to repair DG set door of Capacity 15-200 KVA including repairing of hinges, doors, clamps, handles, angle iron, nut bolts & replacement of lock with existing type and size complete all as specified and directed

M&L for fabrication/Jointing/welding work to repair DG set door of Capacity 200-625 KVA including repairing of hinges, doors, clamps, handles, angle iron, nut bolts & replacement lock with existing type and size complete all as specified and directed

M&L for spray painting to DG set canopy of capacity 15-200 KVA by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of DG set canopy and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer & complete all as specified abd specified.

M&L for spray painting to DG set canopy of capacity 250-625 KVA by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of DG set canopy and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer & complete all as specified abd specified.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 15-30 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 62.5-110 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 125-180 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 200-320 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 400 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 500 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 625 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer's instructions with site requirment including removal of existing unserviceable one complete all specified and as directed.

S&F SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger including removal of existing unserviceable one compete all as specified and as directed .

S&F maintenance free battery lead acid of capacity 12 volts 180 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and as directed.

Supply & filling of Engine oil, multi grade premium Genuine oil 15W/ 40 as per manufacturer's recommendations in DG sets complete all as specified and directed

Supply only petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed.

Supply and filling coolant in 5 litres plastic sealed container for topping up in Radiator of DG set located at different locations complete all as specified and as directed.

S&F battery teriminal brass clamps including removal of existing unserviceable one compete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grill, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged in to spikes, framed guard bars, barred iron doors, ladders, framed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and directed

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in any type of soil complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed

Demolition of Cement Concrete (unreinforced) concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregates; 75mm thick as in plinth protection, etc finished even & smooth using extra cement complete all as specified and directed

M&L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregates) as in hard standing 100 mm thick and similar works etc finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in 100 mm thick sub base, etc complete all as specified and directed

S&F Retro Reflective sticker with letter or figure on 4mm thick Aluminium Composite panel sheet (Block, Roman, Italic or Indian) not exc. 30 cm in silver/white with blue colour back ground and with high intensity grade, pasted or substrate by pressure sensitive adhesive backing and fixing the existing plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, complete all as specified and directed

M&L for stainless steel hollow sections or steel plate of any thickness incl cutting to shape/size required and connecting together by means of welding/rivetting and embedding in concrete complete all as specified and directed. Note:PCC shall be measured & paid separately.

Preparation of new steel surfaces of any discription over 10cm width or girth not otherwise described and M&L for apply two coats of synthic enamel paint over & including one coat of red oxide primer complete all as specified and directed

Preparation of old steel surfaces of any discription over 10cm width or girth not otherwise described and M&L for apply one coat of synthic enamel paint complete all as specified and directed