Empanelment of contractual agency for special repair renovation/ modification works (including public health and E.I. services) at main Campus and outstations of CCSHAU Hisar for the year 2020-2021 upto Rs.5.00 lakh

Amount

Civil item 1 to188 Loading , unloading for sand /earth/ building rubbish (HSR 4.1)

Disposal/ carriage of material / building rubbish (metalled road) with a lead of 2 K.M. excluding loading, unloading (HSR 5.2-a)

Earth work excavation in ordinary soil exclusive of compensation of earth- (b) earth-work undressed with a combined lead upto 15 metres including breaking of clods (HSR 6.2 (b)

Dressing of earthwork :-new work or remodelling work ( HSR 6.3 (i)

Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres(HSR 6.6)

Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers, including ramming watering and consolidating lead upto 30 metres (HSR 6.13 )

Dismantling brick work, tile masonry or tile lining and tile terracing ( HSR 8.5 ) (b) in cement

Dismantling concrete ( HSR 8.6 ) (d) cement concrete plain 1:2:4 mix

Dismantling concrete ( HSR 8.6 ) (e) reinforced cement concrete with cleaning and straightening and cutting of bars if required

Dismantling roofing (HSR 8.8 ) (g) demolishing mud phaska in tile terracing

Removing doors and windows (wooden and steel) together with the dismantling of walls :- ( HSR 8.17 ) (a ) Doors

Removing doors and windows (wooden and steel) together with the dismantling of walls :- ( HSR 8.17 ) (b) windows

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled doors. ( HSR 8.18 ) (a ) Doors

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled doors. ( HSR 8.18 ) (b) windows

Removing glazing fixed or openable (wood and steel) including chowkat hold fasts and concrete blocks:- ( HSR 8.23 ) (a) together with dismantling of walls

Removing glazing fixed or openable (wood and steel) including chowkat hold fasts and concrete blocks:- ( HSR 8.23 ) (b) by making recesses in walls when the wall is not to be dismantled.

Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick including concrete base. (HSR 8.25 )

Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick without concrete base. (HSR 8.26 )

Dismantling brick or flagged stone slab flooring including concrete base (HSR 8.27)

Dismantling brick or flagged stone slab flooring without concrete base. (HSR 8.28)

Scraping (HSR 8.32 ) (a) White wash and colour wash

Scraping (HSR 8.32 ) (c) Cement plaster

Scraping (HSR 8.32 ) (e) brick dismantled from brick work in lime or cement.

Dismantling white or coloured glazed tiles (to be carefully removed) ( HSR 8.38 )

Cement concrete 1:8:16 with brick ballast 40 mm nominal size in foundation and plinth. ( HSR 10.26 )

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth. ( HSR 10.28 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth ( HSR 10.41 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level ( HSR 10.59 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. ( HSR 10.81 )

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement , but including centring and shuttering, laid in position , complete in all respects. ( HSR 10.82 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns,(square or rectangular) battens and lintels etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. (HSR 10.86 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects,(For work upto 1.5 metres below ground level). ( HSR 10.90 )

Extra over item Nos. 10.79 to 10.94 , if 1:1.5:3 mix is used, instead of 1:2:4 ( HSR 10.95 (a )

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded ( HSR 10.114 )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. ( HSR 10.132 )

Providing and laying 60 mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25 mm thick fine sand complete in all respects ( HSR 10.158 )

Providing and laying 80 mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 30 mm thick fine sand complete in all respects ( HSR 10.159 )

First class brick work laid in cement sand mortar 1:6 in foundation and plinth ( HSR 11.2 )

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level ( HSR 11.7 )

First class brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level. (HSR 11.8)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level ( HSR 11.9 )

11.43 cm thick brick wall laid in cement sand mortar 1:4 without reinforcement , in foundation and plinth (HSR 11.47 )

11.43 cm thick brick wall laid in cement sand mortar 1:4 in superstructure ( HSR 11.48 (a )

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.( HSR 13.13 )

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (excluding cost of brick tiles) (Based on HSR 13.13) Note:- Old tiles will be supplied by the department free of cost

Tile terracing with one layer of tiles , 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement mortar 1:3 and top surface to be left clean ( HSR 13.14 )

Tile terracing with one layer of tiles , 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement mortar 1:3 and top surface to be left clean (excluding cost of brick tiles) (Based on HSR13.14) Note :- ( old tiles will be supplied by the deptt. free of cost)

Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 ( HSR 13.50 )

Bottom khurra on ground 1.2 m X 0.6 m consisting of brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8:16 including 12 mm thick cement plaster 1:3 ( HSR 13.57 )

Cement concrete 1:2:4 gola 10 cm X 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified ( HSR 13.64 )

Providing and fixing PVC rain water pipe pressure of ISI mark in cement mortar during masonry work ( HSR 13.89 ) (a) 100 mm dia PVC pipe 6 kg. pressure

Providing and fixing PVC rain water pipe pressure of ISI mark in cement mortar during masonry work ( HSR 13.89 ) (b) 150 mm dia PVC pipe 6 kg. pressure

Providing and fixing PVC bend ISI mark ( HSR 13.90 ) (a) 100 mm dia PVC bend

Providing and fixing PVC bend ISI mark ( HSR 13.90 ) (b)150 mm dia PVC bend

Providing and fixing false ceiling with 12 mm thick Gypsum Board fixed on M.S. steel runners frame including cost of screws angles, cleats, rawel plugs with taping,Filling With Gypsum Compund and applying priming , etc. complete in all respects ( HSR 13.91 )

Providing and fixing mineral fibre false ceilings tiles at all hieghts of size 595 x 595 mm of approved texture, design and pattern, the tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity K = 0.052 (-) 0.057 w/m k, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round gavanized iron section of 0.33 mm thick (galvanized @ 120 gsm) comprising of main T runners of 15 x 35 mm of length 3000 mm, cross T of size 600 x 600 mm suspended from celing using galvazied mild steel item (galvanizedd @ 80 gsm) 50 mm long 8 mm outerdiameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre of centre along main 'T'. The suystem should rest on periphery walls/partitions with the heop of GI perimeter wall angle of wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all hieghts, The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. with or without groves (HSR 13.92)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling ( HSR 14.1 )

Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping ( HSR 14.4 )

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 ( HSR 14.9 )

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 ( HSR 14.10 )

18 mm thick grey polished skirting or dado consisting of bottom layer of 15 mm thick cement sand plaster 1:3 and finished with 3 mm thick topping of neat cement rubbed and polished including rounding off junction with floors ( HSR 14.18)

Brick –on-edge flooring laid in cement sand mortar 1:4 on 75 mm thick cement concrete 1:8:16 and 100 mm sand filling and cement pointed 1:2 on top ( HSR 14.23 )

Flat brick or tile flooring laid dry over a bed of 6 mm thick cement sand mortar 1:6 grouted with cement sand mortar 1:4 and top surface to be left clean after wirebrusing. (HSR14.24)

Pre cast chequered tiles of 20 mm thickness in ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors ,treads of steps and landings ( HSR 14.45 )

Kotah stone flooring, minimum 25 mm thick, in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (Note : The floor shall be finished with granite polish and nothing shall be paid extra). ( HSR 14.62)

Kotah stone 20 mm thick in skirting risers of steps, dados pillars and wall facing(lining) in any pattern as specified 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (Note : The skirting shall be finished with granite polish and nothing shall be paid extra). ( HSR 14.66)

Providing and fixing glass strips, 4 mm thick in floor ( HSR 14.79 ) (b) 32 mm wide

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles ( HSR 14.89 ) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in skirting / dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. ( HSR 14.90 ) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles ( HSR 14.91 ) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete(HSR 14.92 ) (a) size of ceramic glazed tiles 200 mm x 300 mm

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete(HSR 14.92 ) (b) size of ceramic glazed tiles 300 mm x 450 mm

Providing edge moulding to 17-20 mm thick granite stone counters, vanities etc. incluidng machine polished to edge to give high gloss finish etc. complete as per design approved by Engineer In charge (Moulding) (HSR 14.98 (i) (i) Single Moulding

Providing edge moulding to 17-20 mm thick granite stone counters, vanities etc. incluidng machine polished to edge to give high gloss finish etc. complete as per design approved by Engineer In charge (Moulding) (HSR 14.98 (ii) (ii) Double Moulding

12 mm thick cement plaster 1:3 (HSR 15.4)

12 mm thick cement plaster 1:5. (HSR 15.6)

12 mm thick cement plaster 1:6 on walls ( HSR 15.7 )

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12 )

20 mm thick cement plaster 1:4 in 2 coats work. (HSR 15.15 )

Rough cast exterior cement plaster on walls with a mixture of sand sand gravel or crushed stone graded from 2.36mm to 12mm nominal size dashed over and including fresh plaster in 2 coats, first coat 10mm cement plaster 1:4 (1 cement, 4 sand) and finishing coat 10mm cement plaster 1:3 mixed with 10% finely ground hydrated lime by volume of cement including arises, chamfers and / or rounded angles not exceeding 80mm in girth.( HSR 15.18 )

10 mm thick cement plaster 1:4 on underside of ceiling (HSR 15.52 )

Cement pointing 1:2 deep variety on brick and tile work (HSR 15.60 )

Striking joints in lime or cement on brick and tile walls (HSR 15.69 (a )

Cement pointing 1:2 flush on brick on edge flooring ( HSR 15.70 )

Cement pointing 1:2 flush on flat brick flooring (HSR 15.71)

Cement pointing on stone slab pavement with cement mortar 1:2 ( HSR 15.73 )

Cement rendering on plaster 1 mm thick (HSR 15.75)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead , linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 16.1 )

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping, etc. ( HSR 16.2 )

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade ( HSR 16.3 )

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint ( HSR 16.5 )

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint ( HSR 16.7 )

Applying priming coat with metal primer on new steel or iron work including preparation of surfac ( HSR 16.9 )

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality - filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete (HSR 16.24)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces ( HSR 16.25 )

Painting two coats with plastic emulsion paint on walls on new work to give an even shade ( HSR 16.30 )

Painting one coat with plastic emulsion paint on walls on old work to give an even shade ( HSR 16.31 )

White washing two coats ( HSR 16.47 )

White washing three coats (HSR 16.48 )

Colour washing two coats (HSR 16.50 )

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work ( HSR 16.57 )

Distempering with washable oil bound distemper (of approved manufacture)one coat on old distempered work ( HSR 16.59 )

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work).(HSR 16.60)

Finishing walls with exterior decorative cement based paints such as snowcem , Robbiacem etc. on new work, two coats to give an even shade ( HSR 16.61 )

Finishing walls with exterior decorative cement based paints, such as snowcem, Robbiacem etc. on old work, one coat to give an even shade ( HSR 16.62 )

Providing two coats of exterior acrylic emulsion paint ( HSR 16.79 ) (b) 1st quality

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make). ( HSR 16.81 )

Commercial hard wood such as hollock, champ, chikrassy and chaplash ,etc.,(non coniferous timber other than teak conforming to I.S. specification No. 1003 kiln seasoned), shutters with vertical styles and rails, as specified in the statement No.1 ( attached in the end of this chapter) , with two Nos. plywood panels of the specified thickness, mentioned below , tongued and grooved including the cost of iron hinges, screws, chocks/cleats, stops ,etc. ,complete fixed in position excluding the cost of tower bolts and handles but including the labour for fixing the same- (a) 35 mm thick (12 mm thick BWR Grade-II ply wood panel) Note: Nothing shall be paid extra for additional vertical style (any size) if required by the Architect or by the Engineer-in-Charge) (HSR 17.30 + note )

Proving and fixing 35 mm thick glazed door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc. ( non-coniferous timber other than teak confirming to I.S. specifications No. 1003 kiln seasoned), with vertical styles and rails, as specified in the statement no.1 ( attached in the end of this chapter), with glass panes of 4 mm thickness , tongued and grooved including the cost of iron hinges , screws, chocks/cleats, stops , etc., complete fixed in position excluding the cost of tower bolt and handles but including the labour for fixing the same [(Based on HSR 17.30 (a) + 17.24 (c )] (a) 35 mm thick ( 4 mm thick glass panes)

Wire gauze commercial hard wood such as hollock , champ, chikrassy , etc., ( Non –coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position ( excluding the cost of tower bolt and handles but including the labour for fixing the same)-(i) 30 mm thick Note: Nothing shall be paid extra for additional vertical style (any size) if required by the Architect or by the Engineer-in-Charge) ( HSR 17.31 (i )

Providing and fixing wire mesh in the existing wire gauge the shutters with commercial hard wood i.e. Hollock wood beading of size 12 mm x15 mm including nails, etc., complete in all respects ( Based on HSR 17.33 )

Providing and fixing plywood, plain lining, butt-jointed, including, wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- ( HSR 17.47 (f) (f) 6mm thick commercial ply wood.

Providing and fixing plywood, plain lining, butt-jointed, including, wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- ( HSR 17.47 (h) + foot note ) (h) 12mm thick BWR-II grade plywood.

Supplying and fixing hydraulic door closer, I.S.I. mark, with necessary screws , etc., complete- ( HSR 17.82 ) (c) I.S.I. designation No. III (size of door 851 mm to 1000 mm)

Providing and fixing sliding bolt with nuts and screws, etc., complete- ( HSR 17.83 ) (b) aluminium (ii) size 250 mm X 16 mm

Providing and fixing 0.50 mm thick aluminium sheet, including cost of necessary screws, etc., complete ( HSR 17.87 )

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- ( HSR 17.93 ) (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges :- (i) 25 mm thick

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- ( HSR 17.93 ) (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges :- (iii) 35 mm thick

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. Fixed portion (Anodized Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15) ( HSR 17.95 )

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting. ( HSR 17.96 )

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p. brass/ stainless steel screws etc. complete. (b) Pre-laminated particle board with decorative lamination on both sides. ( HSR 17.97 )

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). ( HSR 17.98 ) (b) With float glass panes of 5.00 mm thickness.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS; 6315 marked for doors including cost of cutting floors as required embedding in floors and cover plats with brass pivot and single piece M.S. sheet outer box. (a) With Stainless Steel cover plate. ( HSR 17.99 )

Providing fixing aluminium round shape handle of outer dia 100 mm with screws etc. complete. (i) Anodized (AC-15) Aluminium. ( HSR 17.102 )

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in:-( HSR 18.1) (a) R.S. joists

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in:-( HSR 18.1) (b) flats

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in:-( HSR 18.1) (c) tees, angles and channels

Wrought iron and mild steel (using angles, flats square bars. tees and channels) ladders, grills, gratting frames, window guards, iron door openable or fixed stair case or parapet or any other type of railing , gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position ( HSR 18.12 )

Supplying and fixing rolling shutters, of approved make, M.S. Laths , interlocked together through their entire length, and jointed together, at the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides, 27.5 cm long wire spring grade no.2 , and arrangement for inside and out side locking , with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed):- (b) with 80 mm X 1.25 mm M.S. Laths ( HSR 18.18 )

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

Supplying openable steel doors and windows, of standard steel sections, joints mitred and electrically flash welded including provision for arrangement of receiving handles, peg stay, catcher will also be welded with the frame and providing and fixing pressed steel projected hinges, iron lugs, glazing clips (excluding wooden shutters, glazing and fittings such as handles, peg stay and catcher etc.) and finished with one coat of ready mixed red lead non setting primer ( HSR 18.24 )

Fixing steel windows in walls with lugs, embedded in 15 cm x 11.43 cm X 7.5 cm cement concrete blocks, of 1:3:6 mix, excluding fixing of glass panes but including cost of cement concrete for lugs ( HSR 18.29 )

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas (HSR 18.30 )

Wire gauze of 140 G or 120 G designations fixed on steel windows of standard rolled steel section, with 3 mm thick flat iron cover moulding of 12.5 mm width, fixed with machine, screws welded complete in all respects. (HSR 18.32)

Pressed steel sheet frames (chowkhats), consisting of 2.00 mm thick steel sheet of the specified section, including iron lugs (hold fasts, iron hinges, confirming to PWD specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red led non-setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs, complete:- ( HSR 18.34 ) (a) . door and window frame of size 76mmx 38mm with 35mm wide single rebate.

(c). door and window frame of size 114mmx 50mm with 35mm wide double rebate. (HSR 18.34)

Laying brick on end edging length wise 22.86 cm deep and 6.83 cm wide including excavation of earth and refilling the excavated soil and compacting along brick edging complete in all respect with other than brick soling. (HSR 24.6[b])

NS Items:- Providing and applying two coats of Dr. Fixit Pidicrete URP – SBR Latex (Pidilite make) solution made of URP + cement in the proportion of 1:1.5 (as recommended by the manufacturer) on deteriorated concrete surfaces of slab and columns, complete in all respects as directed by the Engineer-in-Charge. ( NS )

Collection of Ist class bricks, at the site of work including carriage , loading unloading and stacking, etc., confirming to Haryana PWD Specification No.3.5 ( NS )

Providing and fixing 19 mm thick BWR Grade-II block board (I.S.I. mark) shutter for cabinet including cost of iron hinges, screws, etc., complete fixed in position. ( NS )

Earth filling under floors/road/along with boundary wall/in open area with dune sand (tiba sand), brought from outside (any lead), in 15 cm layer including laying, dressing, watering ramming, consolidating, excavation, carriage, loading, unloading and compensation, etc., complete ( NS )

Providing and fixing C.I. grating over 100 mm dia rain water pipe, fixed in position, complete in all respects. ( NS )

Providing and fixing planking of 19 mm thick wood polymer cellka board (ISI mark) of approved make in cupboards including cutting, nails and screws, etc., fixed in position, complete in all respects as per drawing and design. ( NS )

Providing and fixing PVC wall panelling consisting of 7mm thick hollow PVC section of Cactus or any other equivalent make (as approved by Engineer-in-Charge) PVC U-section beading of size 25mm x 8mm x 12mm and PVC angle nosing of size 25mm x 25mm x 1.5mm of Cactus or any other equivalent make (as approved by Engineer-in-Charge) including cost of PVC gutties, screws, jointed with polyfix (instant glue), complete in all respects as per drawing or as directed by Engineer-in-Charge. (NS)

Scraping of brick tiles of size 22.86 cm x 11.43 cm x 3.81 cm in cement mortar, complete ( NS )

Removing of existing false ceiling tiles at all height (ceiling tiles only) of size 60 cm x 60 cm x 12 mm thick of teak wood particle board and plain board in boarder (to be removed carefully), complete in all respects as directed by Engineer-in-Charge. ( NS )

Fixing of old false ceiling tiles at all height (ceiling tiles only) of size 60 cm x 60 cm x 12 mm thick of teak wood particle board in existing aluminium tee frame (excluding aluminium tee frame) properly maintaining 3/8” wide grooves including proper opening for light fittings, cost of screws, nails, rawl plugs, primer and painting etc. complete in all respects as directed by Engineer-in-Charge. (Note: - false ceiling tiles will be supplied by the department free of cost). ( NS )

Racking out joints in cement mortar (making zhiri in existing tile terracing) uprooting the grass and preparing the surface for re-pointing including disposal of rubbish with a lead of 2 K.M. complete in all respect as directed by the Engineer-in-charge ( NS )

Tacking (making rough) the exposed reinforced cement concrete surface for cement plaster (horizontal and vertical surface) including removing of loose concrete, disposing off the malba and cleaning the surface etc., complete in all respect as directed by Engineer-in-Charge. ( NS )

20 mm thick cement plaster 1:3 in two coats under ceiling (Ist layer 10 mm thick with cement coarse sand plaster 1:3 and final layer of cement plaster 1:3). ( NS )

Providing and fixing IRC fabric of all sizes made of 2.20 to 3.25 mm diameter wire, in steel frame with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws, welded, complete in all respects (excluding steel frame) ( NS )

Providing and fixing 1 mm thick mat finish plastic laminated sheet ISI mark on existing wooden surface/WPC board including cost of nails and adhesive, complete in all respect as per directed by Engineer-in-charge ( NS )

Providing and fixing marble strips of size 14 mm to 17 mm thick and 40 mm wide in cement concrete/ terrazzo flooring fixed in position, complete in all respects as per drawing and design or as directed by Engineer-in-Charge. ( NS )

Providing and laying 14mm to 17mm thick Sarderali granite stone (polished) on existing work top/flooring/skirting including matching grains laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade, complete in all respects as per drawing and design. ( NS )

Providing and fixing 15 mm to 18 mm thick Z-Black granite stone (polished) on work top/flooring/skirting including matching grains laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, complete ( NS )

Providing and fixing 15 mm to 18 mm thick Z-Black granite stone (polished) fixed on existing wooden work top/surface with fevitite/areladite or any approved adhesive laid in any pattern as specified and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, complete ( NS )

Providing and fixing vitrified tiles of size 600 mm x 600 mm of approved make in flooring/skirting, laid in any pattern as specified over base of adhesive of reputed brands such as Pidilite, Laticrete, Ferrouscrete & Valendure as per IS specification 15477-2004 and jointed with white cement slury mixed with pigment to match the shade of tiles including taking (making rought) the existing floor. Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. (NS ) ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. (NS)

Providing and fixing vitrified tiles of size 800 mm x 800 mm of approved make in flooring/skirting, laid in any pattern as specified over base of adhesive of reputed brands such as Pidilite, Laticrete, Ferrouscrete & Valendure as per IS specification 15477-2004 and jointed with white cement slury mixed with pigment to match the shade of tiles including taking (making rought) the existing floor. Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. (NS ) ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. (NS)

Providing and fixing vitrified tiles of size 800 x 800 mm of approved make in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing vitrified tiles of size 800 x 800 mm of approved make in skirting aid in any patterns as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing vitrified tiles of size 1200 x 600 mm of approved make in skirting aid in any patterns as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing 0.60 mm thick high strength galvanized colour coated steel sheets having trapezoidal profiles of approved make (I.S.I. mark) in roofing, at all height, fixed in position with self drilling screws of approved shape & make, complete in all respects as per drawing & manufacture’s specifications and instruction of Engineer-in-Charge. (NS)

Providing and fixing factory manufactured cement concrete 1:2:4 kerb finished smooth and of size 1’-0” x 1’-0” x 0’-6” of required shape and design fixed at ground level along with road, complete in all respect as directed by the Engineer-in-Charge but excluding cost of cement pointing. (NS)

Providing and fixing factory manufactured cement concrete 1:2:4 channel finished smooth and of size 1’-0” x 1’-0” x 0’-3” of required shape and design fixed at ground level along with road, complete in all respect as directed by the Engineer-in-Charge but excluding cost of cement pointing. (NS)

Providing and fixing 12mm thick toughened glass AIS/Modi Guard/Saint Gobain make for door shutters duly toughened by standardized plant, with required holes and cutout for fixing all required accessories/allied itmes of DORMA make, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)

Providing and fixing 12mm thick toughened glass AIS/Modi Guard/Saint Gobain make for fixed glazing duly toughened by standardized plant with all required accessories/allied itmes of DORMA make, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)

Providing mirror polishing on existing granite/kotah stone flooring/skirting, terrazzo flooring/skirting/dado to give high gloss finish, complete in all respects as directed by Engineer-in-Charge (NS)

Laying and consolidation of stone metal wearing coat 50 mm thick (37.5 mm compacted thickness) to BUILT UP SPRAY GROUT specification (in one layer) with crushed stone metal 53 mm to 2.8 mm gauge/ grade, key aggregate of size 22.4 mm to 2.8 mm confirming to table 500.7 as per clause 506-2.2 and bitumen spray in proportion as per design criteria specified and rolling it with road roller including the cost of stone metal, key aggregate, bitumen, road roller, etc., complete in all respect as per M.O.R.T. & H. Specification for Roads and Bridges Works (4th revision of 2001/ latest edition) (NS)

Laying and consolidation of stone metal wearing coat 100 mm thick (75 mm compacted thickness) to BUILT UP SPRAY GROUT specification (in two layers) with crushed stone metal 53 mm to 2.8 mm gauge/ grade, key aggregate of size 22.4 mm to 2.8 mm confirming to table 500.7 as per clause 506-2.2 and two bitumen spray in proportion as per design criteria specified and rolling it with road roller including the cost of stone metal, key aggregate, bitumen, road roller, etc., complete in all respect as per M.O.R.T. & H. Specification for Roads and Bridges Works (4th revision of 2001/ latest edition). (NS)

Providing and laying bituminous tack coat using 3 Kg. bitumen of 80/100 grade per 10 sq. metre area on existing bituminous surfaces including the cost of bitumen, complete in all respects as per Clause No. 503 of M.O.R.T. & H Specification for Roads and Bridges Works (4th revision of 2001/ latest edition). (NS)

Providing and laying 20 mm thick premix carpet on road with coarse aggregate and bitumen mixed and heated with mechanical mixer, in the proportion as per design criteria specified, laying and rolling it with road roller including the cost of aggregate, bitumen and road roller, lighting arrangement, sign boards, and night watchmen, complete in all respect as per Clause No. No. 511 of M.O.R.T. & H Specification for Roads and Bridges Works (4th revision of 2001/ latest edition) but excluding tack coat & seal coat. (NS)

Providing and laying premix ‘B’ type seal coat with bitumen and fine aggregate mixed and heated with a mechanical mixer, in the proportion as per design criteria specified, and laying the same manually and rolling it with road roller including the cost of fine aggregate, bitumen, road roller, etc., complete in all respect as per Clause No. 513 of M.O.R.T. & H Specification for Roads and Bridges Works (4th revision of 2001/ latest edition). (NS)

Providing and fixing at all height, fiber glass sheets of approved colour on steel trusses/ frame (excluding cost of frame) including nuts, bolts, screws and bitumen washer etc. fixed in position, complete in all respect as per architectural drawing and design. (NS)

Providing and fixing G.I. barbed wire fencing, weighing 13.60 kg to 15.50 kg per 100 metres (Horizontal/ diagonal )and fixed with G.I. wire of 12 gauge or by providing cut including drilling holes in the posts, complete in all respects as directed by Engineer-in-Charge (including the cost of G.I. wire used for binding which shall not be measured for payment but excluding the cost of posts, struts, earth work and concrete which is payable extra) (NS)

Providing and fixing G.I. barbed wire fencing, weighing 13.60 kg to 15.50 kg per 100 metres (Horizontal/ diagonal) and fixed with G.I. hooks by means of G.I. wire of 12 gauge in the RCC posts, complete in all respects as directed by Engineer-in-Charge (including the cost of G.I. wire used for binding which shall not be measured for payment but excluding cost of RCC posts, G.I. hooks and cement concrete blocks which are payable separately.) (NS)

Providing and fixing 8 gauge G.I. wire for making rings for reinforced concrete posts including bending, binding and placing in position, complete ( NS )

Providing and fixing 0’-4” long M.S. pipe of ¾” dia (middle class) embedded in RCC posts, complete in all respects as per architectural drawing and design. (NS)

Providing and fixing G.I. interlocking fencing of size 3”x 3” or any other size made of 10 gauge wire fixed with RCC post by means of M.S. flat & bolts/ nuts (Items of M.S. flat and bolts/ nuts shall be paid separately under HSR) including drilling holes in M.S. flats etc., complete in all respects as per architectural drawing and design. ( NS )

Providing and fixing 8 mm thick plain bison panel of approved make in cabinet shutter/duct in frame (cost of frame and moulding/beading shall be paid separtely) fixed with machine screws including cutting, drilling holes, etc., complete in all respects as per architectural drawing and design (NS)

Providing and fixing expanded metal (steel) of size 20mm x 50mm (dimensions of strands- width 3.25mm and thickness 2.24mm and nominal weight of expanded metal 5.086 kg per square metre) or of size 12.5mm x 40mm (dimensions of strands- width 3.25mm and thickness 1.60mm and nominal weight of expanded metal 5.017 kg per square metre) or any other size confirming to Haryana PWD Specifications 1990 No. 3.28 in steel frame (excluding the element of steel frame which shall be paid separately) with 3.00mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws, welded complete in all respects as per drawing and designs.(NS)

Removing of existing precast cement concrete kerbs (to be removed carefully) from road/path/plinth protection and shifting the same to maintenance store, complete in all respects as directed by the Engineer-in-Charge. (NS)

Removing of existing precast cement concrete channels (to be removed carefully) from road/path/plinth protection and shifting the same to maintenance store, complete in all respects as directed by the Engineer-in-Charge. (NS)

Fixing of existing precast cement concrete kerbs in path/road/plinth protection, complete in all respects as directed by the Engineer-in-Charge (old kerbs will be supplied by the department free of cost). (NS)

Fixing of existing precast cement concrete channels in path/road/plinth protection, complete in all respects as directed by the Engineer-in-Charge (old channels will be supplied by the department free of cost). (NS)

Providing and fixing 45 mm wide solid & 30 mm wide jail Zebra type (PCL Rainbow or any other equivalent make as approved by Engineer In charge) horizontal Venetian blinds of required size and shape, fixed in position including rawl plugs and screws etc., complete in all respect. (NS)

Providing and fixing concertina spiral GI wire fencing of 1'-6"/2'-0" dia or any other dia on Y-shape angle iron posts & barbed wire fencing (excluding cost of angle iron post & barbe wire fencing) weighing 150-160 kg per 100 metre, (of Make as approved by Engineer-in-Charge and confirming to IS specifications) fixed with plain GI wire of 16 gauge, complete in all respect as directed by Engineering Incharge (plain GI wire used for binding shall not be measured for payment). (N.S.)

PH item 189 to 367:- Excavation for pipe lines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and watering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc., and outside the town in ordinary soil:- (a) without timbering and shoring up 1.5 metres depth(HSR 6.8[a])

Excavation for pipe lines running under pressure in trenches and pits, in streets & lanes including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and watering of refill. In 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, crossing over trenches for access to the houses, watching fencing, etc., and disposal of surplus soil outside and inside the town, involving lead up to one K.M. in ordinary soil:-a) without tembering and shorting upto 1.5 metres depth (HSR 6.9[a])

Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawing including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimension, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc., night signals, profiles, pegs, sight rails, boning rods, crossing over trenches, for access to the houses, watching, fencing, etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, up to a lead of 1 K.M. in ordinary soil (a) for depth of excavation not exceeding 3 metres below ground level (HSR [6.10](a)}

Stringing out A.C./P.V.C pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railways station to site of works and return of pieces of pipes to stores.(HSR [28.7]) (a) 50 mm internal diameter pipeline

(b) 80 mm internal diameter pipeline

(c) 100 mm internal diameter pipeline

Jointing A.C./P.V.C. pipes and specials with cast iron detachable joints/split coupler P.V.C. joint fitted with bolts and nuts excluding cost of detachable joints/split coupler P.V.C. joints rubber rings, bolts and nuts but including cost of labour and tools etc. and tested complete. (HSR[28.8]) replaced/amended item. (i) 50 mm internal diameter pipeline

(j) 80 mm internal diameter pipeline

(k) 100 mm internal diameter pipeline

Cutting A.C./P.V.C. pipe and specials and chipping or filling surface to a uniform finish. (HSR 28.9) (a) 50 mm internal diameter pipe line

(b) 80 mm internal diameter pipeline

(c) 100 mm internal diameter pipe line

Providing & fixing cast iron double flanged sluice valves PN-1.6 marked with IS: 14846 including nuts & bolts marked with IS;1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking handling, re-handling etc., complete in all respect in the satisfaction of Engineer-in-Charge (Makes: AARKO, VENUS, LEADER, SI, PANJA, UPADHAY (HSR 28.10 replaced/ amended item) (a) 80 mm internal diameter pipe line

(b) 100 mm internal diameter pipeline

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. (HSR[28.18]) (b) INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line

(iii) 25 mm internal diameter of pipe line

(v) 40 mm internal diameter of pipe line

(vi) 50 mm internal diameter of pipe line

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets, elbows etc. in trenches in the ground, cutting, threading and testing etc., complete. (HSR[28.19]) (b) 20 mm internal diameter of pipe line

(c) 25 mm internal diameter of pipe line

(e) 40 mm internal diameter of pipe line

(f) 50 mm internal diameter of pipe line

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. (HSR[28.21]) (a) 15 mm internal diameter of pipe line

(b) 20 mm internal diameter of pipe line

(c) 25 mm internal diameter of pipe line

(e) 40 mm internal diameter of pipe line

(f) 50 mm internal diameter of pipe line

Drilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections:- (HSR[28.22]) (a) 15 mm internal diameter of pipe line

(b) 20 mm internal diameter of pipe line

(d) 25 mm internal diameter of pipe line

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR [28.24]) (a) 11.43 cm thickness of walls

(b) 22.86 cm thickness of walls

( c) 34.29 cm thickness of walls

Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing, replastering, replacing bitumen and colour or white washing where required. (HSR[28.26]) a) 75 mm thickness of roof of floor

b) 115 mm thickness of roof of floor

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside buildings including cartage from divisional stores or nearest railway station to site of works. (HSR 28.29) (a) 15 mm internal diameter

(b) 20 mm internal diameter

(c) 25 mm internal diameter

(e) 40 mm internal diameter

(f) 50 mm internal diameter

Making connection with the existing G.I branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. (HSR 28.34)

Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning, trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Size of the main with which connection is to be made:- (HSR 28.47) (a) Upto 200 mm i/dia mtr

Providing and fixing steel bar embedded plastic steps of size 263 mm x 165 mm of orange colour, conforming to specifications, in pump chambers, manholes etc., having minimum 3 mm thick polypropylene on 12 mm dia ribbed steel bars per IS : 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, unloading, stacking, handling, re-handling etc., complete in all respects to the satisfaction of Engineer-in-Charge. (HSR 29.28 replaced/amended item)

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 29.84) (a) size 450 mm x 450 mm in side ( with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg. With C.C. topping )

(b) size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)

(c) size 600 mm x 900 mm inside ( with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg. With R.C.C. slab)

Extra for every 0.30 metre depth of inspection chamber (HSR 29.85) (a) 450 mm x 450 mm

(b) 450 mm x 600 mm

(a) 600 mm x 900 mm

Providing slat glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with is: 651 and their lowering, cutting, jointing and testing as desired in HSR item No. 29.38, 29.39, 29.40, including the cost of jointing materials as well as carriage, loading, unlloding stacking, handing, re-handling etc. complete in all respects to the satisfaction of Engineer-In Charge. (HSR 29.95) 150 mm internal dia

Providing and fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian type Orissa or orya water closet suite for sinking into floor, with raised foot treads complete with 100 mm H.C.I ‘P’ trap with or without vent as required and all other necessary fittings as fully described in item no. 30.1 above (excluding cost of CI high level flushing cistern) (based on HSR 30.2) (a) 580 mm (i) WHITE

Providing and fixing in position best Indian make European type water closet suite with concealed ‘P’ of ‘S’ trap with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item No. 30.3 above (excluding cost of C.I. high level cistern) (based on HSR 30.6) (White)

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. (HSR 30.13) (i) White plastic seat ( Solid)

Extra for providing and fixing 32 mm dia. G.I/ C.P flush pipe complete with accessories instead of 32 mm dia. Galvanised telescopic flush pipe with clips ( as required by the Engineer-in-charge) (HSR 30.15) (b) 32mm dia C.P brass flush pipe

Providing and fixing in position best Indian make flat back or angular lipped front urinal 465 mm high consisting of :- (HSR 30.19) (i) flat back lipped or angular urinal basin of vitreous china ware, (to the approval of the Engineer-in-charge) (ii) 5 lit capacity mosquito; Indian make C.I automatic cistern, painted with non-yellowing white enamel paint or other approved shade enamel paint on out side and superior black bitumastic paint on inside complete with screwed 15 mm pipe; (iii) pair of R.S or C.I painted brackets and brass couplings; (iv) standard size G.I flush pipe with C.P brass wall clips and unions complete including cutting and making good the walls and floor and painting of fittings etc. ( as required by the Engineer-in-charge). (i) WHITE

Providing and fixing in position best Indian make a range of two urinals flat back or angular lipped front in vitreous china-ware with 5 lit capacity best Indian make C.I automatic flushing cistern with fittings and flush pipe etc; complete as fully described in item no. 30.19 above (HSR 30.20) 465 mm high (i) White

Providing and fixing in position best Indian make a range of three urinals flat back or angular lipped in vitreous china-ware with one no. 10 lit capacity best Indian make C.I flushing cistern with fittings and flush pipe etc. complete as fully described in item no. 30.19 above.(HSR 30.21) 465 mm high (i) WHITE

Providing and fixing in position best Indian make large flat back or angular lipped front urinal 610 mm high consisting of:- (i) flat back lipped or angular urinal basin or vitreous china-ware; (to the approval of the Engineer-in-charge) (ii) 5 lit capacity mosquito proof Indian make C.I automatic flushing cistern painted with non-yellowing white enamel paint or other approved shade enamel paint on out side and superior black bitumastic paint on inside with screwed 15 mm pipe: (iii) pair of R.S or C.I painted brackets and brass couplings:- (iv) pair of C.I special type brackets for urinal: (v) 32 mm C.P brass spreader: (vi) standard size G.I flush pipe with C.P brass wall clips and unions: (vii) 32 mm C.P brass waste with dome-grating: (viii) 32 mm C.P brass bottle trap: complete including cutting and making good the walls and floors and painting of fittings etc. (as required by the Engineer-in-charge) Single Urinal (HSR 30.25) (i) White

Providing and fixing in position best Indian make a range of two urinals large flat back or angular lipped front 610 mm high in vitreous china-ware with 5 lit capacity best Indian make C.I automatic flushing cistern with fittings and flush pipe etc. complete as fully described in item no. 30.25 above, (HSR 30.26) Range of three urinals (i) White

Providing and fixing in position best Indian make a range of three urinals large flat back or angular lipped front 610 mm high in vitreous china-ware with one no. 10 lit capacity best Indian make C.I automatic flushing cistern with fittings and flush pipe etc. complete as fully described in item no. 30.25 above. (HSR 30.27) Range of three urinals (i) White

Extra for providing and fixing vitreous automatic flushing Cistern including fittings and brackets of C.I. flushing cistern complete (HSR 30.37) (a) 5 ltr. capacity cistern (i) White

(b)10 ltr. capacity cistern (i) White

Extra for providing and fixing standard size C.P. brass flush pipe complete with fittings instead of G.I flush pipe complete (HSR 30.38) (a) For single urinal

(b) For a range of two urinals

(c) For a range of three urinals

Providing and fixing 25 mm thick marble partitions for different type of urinals. (HSR 30.40) (a) size 375 mm x750 mm

(b) Vitreous Chainaware Partition Plate (I) SMALL SIZE 680 mm x 330 mm (i) White

(II) LARGE SIZE 835 mm x 355 mm (i) White

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of Lavatory in vitreous china ware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary, R.S or C.I brackets for building into wall including painting; 32 mm C.P. brass waste with C.P brass chain and rubber plug; 15 mm C.P brass screw down pillar tap with jamnuts or couplings best design ( as approved by the Engineer-in-charge) all fittings best Indian make and; to the approval of the Engineer-in-charge all brass work chromium plated and complete in all respects including cutting and making good the walls and floors and painting of fittings etc. (HSR 30.41) WHITE (iv) size 550 mm x400 mm with one no tap

Providing and fixing in position best Indian make Lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item No.30.41 above. (HSR 30.42) White i. Size 510mm x 400mm with one No. tap

ii. Size 530mm x 430mm with one No. tap

Providing and fixing in position best Indian make chromium plated brass 2nd tap for lavatory suite (HSR 30.45)

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg per meter and 2.8 mm thick) up to floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) (HSR 30.48)

Providing and fixing in position best Indian make chromium plated brass bottle trap 32 mm diameter (HSR 30.50)

Providing and fixing in position best Indian make vitreous chinaware sinks with complete fittings as fully described in item no. 30.51 above (HSR 30.52) WHITE (a) 600 mmx450mmx200mm

Providing and fixing in position best Indian make vitreous chinaware laboratory sinks( to the approval of the Engineer-in-charge) (i) sinks in vitreous chinaware with or without 15 mm rim projection around outlet 65 mm x 50 mm and with or without combined open weir over flow centre at end complete with (ii) Laboratory sink waste. (iii) Pair of clamps of 25mmx3mm thick iron complete in all respects including cutting making good the walls or tables etc. (HSR 30.60) WHITE (d) size 450mmx300mmx150mm

(c) size 425mmx330mmx175mm

Providing and fixing 40mm G.I waste pipe embedded in walls or lead waste pipe weighing 4.46 kg/ metre and 3.0 mm thick up to floor level as required by the Engineer-in-charge including cost of union and plumber joint. (HSR 30.62)

Providing and fixing in position best Indian make shower with 15 or 20 I/d out let. (HSR 30.66) (c) C.P. brass with revolving joint (HSR 30.66) (c) C.P. brass with revolving joint

Providing and fixing in position best Indian make paper holders fixed into wall with C.P brass screws complete in all respects including cutting and making good the walls etc. (HSR 30.67) (a) C.P. brass

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P brass screws. Complete in all respects including cutting and making good the walls etc.(HSR 30.68) (a) 20 MM DIA C.P. BRASS ADJUSTABLE (ii) 600mm long

Providing and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the walls etc. (HSR 30.70) (a) C.P. BRASS (i) soap dish large

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P brass screws ( as required by the Engineer-in-charge) complete including cutting and making good the walls etc. (HSR 30.71) (a) INDIAN MAKE (i) 600mmx450mm

Providing and fixing in position brass oxidized gas taps ( to the approval of the Engineer-in-charge) complete in all respects (HSR 30.72) (a) one way

(b) two way

Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P brass screws and rawl plugs etc. complete including cutting and making good the walls etc. (HSR 30.73) (a) C.P. BRASS (i) one way

(b) two way

Providing and fixing in position 15 mm i/d C.P brass bib cocks of best quality ( as required by the Engineer-in-charge) (HSR 30.75) (a) Bib cock long body

(c) Bib cock

Providing and fixing in position C.P brass stop cock (as approved by the Engineer-in-charge) (HSR 30.76) (a) 15 MM STOP COCK (ii) concealed stop cock with flange

Providing and fixing C.P brass liquid soap container of best quality (as required by the Engineer-in-charge). (HSR 30.77)

Providing and fixing 15mm C.P brass laboratory cock swan neck of best quality ( to the approval of the Engineer-in-charge) (HSR 30.78 (a) one way

(b) two way

Providing and fixing in position best Indian make C.P brass inlet connection 15mm with 375mm pipe and C.P brass nuts. (HSR 30.83)

Providing and fixing in position H.C.I soil waste vent or antisyphonage pipes to I.S.I specifications of E.L.C manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floors etc. and making good to its original condition but excluding cost of lead jointing. (HSR 30.84) (a) 100 mm internal diameter

(b) 75 mm internal diameter

Providing lead caulked joints to H.C.I pipes and specials conforming to I.S.I specification of E.L.C manufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. (HSR 30.87) (a) 100 mm internal diameter

(b) 75 mm internal diameter

Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S flat not less than 5mm of the approved design for fixing C.I soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting (HSR 30.88) (a) for 100mm internal diameter pipes

(b) for 75mm internal diameter pipes

Providing and fixing H.C.I. floor traps I.S.I. marked of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under the around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc., minimum depth of water should be 150 mm with a minimum seal of 50 mm (HSR 30.89) (b) With 75 mm internal dia outlet

Providing and fixing in position H.C.I specials for soil, waste, vent or anti-syphonage pipes to I.S.I marked including cutting and wastage etc/., and making good to its orFiginal condition but excluding cost of lead jointing. (HSR 30.91) (a) For 100 mm I/D Pipes (i) heal rest bend

(ii) double junction with door 100mm x 100mm x 100mm x 100 mm

(iv) single junction with door 100mmx100mm x 100mm

(vi) single junction with door 100mmx100mm x 100mm

(xiii)bend with door

(xiv) bend plain

(xvi) cowls

(xxii) collars

(b) For 75 Mm I/D Pipes (i) heal rest bend

(iii) double junction with door 75mm x 75mm x 75mm x 75mm

(iv) single junction with door 75mmx75mmx75mm

(vi) black junction plain 75 mm X 75 mm X 75 mm

(xiii) Bend with door

(xiv) Plain bend

(xvii) Cowls

(xviii) Collars

Providing and fixing lead inlet connection with brass union for flushing and warning pipes complete in all respects.{HSR 30.93 (c)} (c) 15 mm alkathene pipe inlet connection

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition (HSR 30.95) (a) size 75 mm X 75 mm

Painting H.C.I. soil waste and vent pipes and fittings with black bitumastic ordinary paint of approved manufacture two coats on new work. (HSR 30.101) (a)100 mm internal diameter

(b)75 mm internal diameter

Painting G.I.pipes and specials with aluminium paints on new or existing work two coats paint including cleaning rubbing surface etc. (HSR 30.108) (a) 15 mm and 20 mm i/d of pipes and specials

(a) 25 mm and 32 mm i/d of pipes and specials

(c) 40 mm and 50 mm i/d of pies and specials

Providing and fixing in position automatic brass ball valves in tanks (HSR 30.110) (b) WITH PLASTIC BALL (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150 mm X 150 mm cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm X 300 mm and outside size 330 mm X 330 mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundations, and cement concrete 1:2:4 in coping around C.I. cover and frame et. With three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150 mm with a minimum seal 50 mm (HSR 30.114) (b) 100 mm internal diameter H.C.I. gully trap

Providing and fixing in position best Indian make ( to the approval of the Engineer-in-charge) storage type automatic electric water heater, pressure/non – pressure type, thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with- drawable and adjustable type A.C. thermostate, thermostat knob to be readily, accessable through the opening of suitable cover for adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) a neon indicator 1 amp. Inner conntainer made out of coppertinned both from inside and outside outer container made out of mild steel sheet finished in gleaming white stove enamel paint insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/ lead connections or pressure release valve (where required). (HSR 30.117) Complete including fixing and testing for a week ( as required by the Engineer- in- charge) VERTICAL WATER HEATER Make:- Venus, Bajaj, Glassline, Recold ISI marked as approved by the Engineer-in-Charge. (a ) 25 litres capacity

(b) 30 litres capacity

(c) 35 litres capacity

Providing and fixing HDPE WATER STORGE TANKS of sintex, diplas O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (HSR 30.119) 300 ltr,. capacity

500 ltr,. capacity

1000 ltrs capacity

2000 ltrs capacity

NS items:- Supply of G.I. pipe ‘B’ class ISI marked of ‘Ravindra’ / ‘Jindal’ / ‘Parkash ( Surya)’/BST make (NS) (a) 15 mm internal dia

(b) 20 mm internal dia

(c) 25 mm internal dia

(d) 40 mm internal dia

(e) 50 mm internal dia

Supply of G.I. Union couplings of Unik / Unco make (NS) (a) 15 mm internal dia

(b) 20 mm internal dia

(c) 25 mm internal dia

(d) 40 mm internal dia

(e) 50 mm internal dia

Supply of G.M. Peet valve (heavy type) of DRP/Leader/Bajaj make ISI marked. (NS) (a) 15 mm internal dia

(b) 20 mm internal dia

(c) 25 mm internal dia

(d) 40 mm internal dia

(e) 50 mm internal dia

Supply and fixing in position stainless steel sink made of 1 mm thick Salem stainless steel sheet along with fittings of Blue Star/ Jayna or equivalent make as per AISI 304 (18/8), complete in all respect. (NS) Bowl size = 560 mm x 405 mm x 178 mm Overall size = 610 mm x 460 mm x 178 mm

Supply of PVC pipe 6 kg/cm² pressure of ISI marked of Prince / Supreme/Vindhya make. (NS) a) 63mm dia (2” i/dia) size

b) 90 mm dia (3" i/dia) size

c) 110mm dia (4” i/dia) size

Providing and fixing in position vitrous Chinaware Indian type Orissa WC pan 23” size, white of first quality Hindware/Cera/Perryware make complete in all respect including dismantling of existing damaged WC pan and disposal of released malba upto a lead of one kilometer complete to the direction of the Engineer-in-Charge. (NS)

Providing and fixing in position vitrous Chinaware European type WC pan, white of first quality Hindware/Cera/Perryware make complete in all respect including dismantling of existing damaged WC pan and disposal of released malba upto a lead of one kilometer complete to the direction of the Engineer-in-Charge. (NS)

Providing and fixing in position PVC flushing cistern 8.0 ltrs. capacity of Hindware/Cera/ Perryware make, white, alongwith fittings complete in all respect. (NS)

Providing and fixing in position vitrous Chinaware wash hand basin 22” x 16” size, white of first quality Hindware/Cera/ Perryware make including CP waste 4” long and dismantling of existing damaged wash hand basin and disposal of released malba up to a lead of 1 kilometer complete in all respect to the direction of the Enigneer-in-Charge. (NS)

Providing and fixing in position vitrous Chinaware urinal pan, white, first quality of Hindware/Cera/ Perryware make complete in all respect of the following sizes including CP brass waste and CP brass spreader after dismantling of existing damaged pans and disposal of malba up to a lead of one kilometer complete in all respect to the direction of the Engineer-in-Charge. (NS) (a) 465 mm high

(b) 610 mm high

Providing and fixing PVC floor trap 90 mm i/dia outlet of Prince/Supreme/Skipper make, complete in all respect. (NS)

Providing and fixing gully trap (Heavy duty) 100 mm (4"i/dia) with cover & frame complete in all respect of Prince/Supreme/Skipper make. (NS)

Providing and fixing PVC specials of Prince/Supreme/Skipper make of following sizes. (NS) (a) 100 mm i/dia (i) HR Bend

(ii) Door Tee 4" x 4" x4"

(iii) Elbow

(iv) Plain Tee 4" x 4" x4"

(v) Cowl

(b) 80 mm i/dia (i) HR Bend

(ii) Door Tee 3" x 3" x3"

(iii) Elbow

(iv) Plain Tee 3" x 3" x3"

(v) Cowl

Providing and fixing CP brass Jet with flexible pipe and patti etc. of best quality complete in all respect (without cost of CP brass concealed stop cock). (NS)

Supply of CPVC pipes (Heavy duty) having thermal stability fot hot & cold water of Prince/Supreme/Skipper/Astral make as approved by the Enigneer-in-Charge complete in all respect. (NS) (a) 15 mm (½") i/dia

(b) 20 mm (¾") i/dia

(c ) 25 mm (1") i/dia

(d) 40 mm (1'/2") i/dia

(e) 50 mm (2") i/dia

Electrical work 368 to 513:- Wires and Cables Supply and erection of 3 core PVC copper insulated and sheathed circular flexible wire:- {HSR 31.9 (e)} (e) Size 2.50 sq mm (80/0.20 mm)

MCB/Isolator Supply and erection of miniature circuit breaker/isolator 240/415V in the existing distribution board including making necessary connections:- Miniature Circuit Breakers of 9 K.A. breaking capacity. (HSR 31.17) (ii) 6 amp. To 32 amp. SP

(ii) 6 amp. To 32 amp. SPN

(ii) 6 amp. To 32 amp. TPN

(iii) 40 amp to 63 amp. SPN

(iii) 40 amp to 63 amp. TPN

Supply and erection of Fittings and Accessories (HSR 31.18) (xi) Bakelite angle/straight button holder Large size.

(xii) Switch 5 amp on existing sheet.

(xiii) Wall socket 5 amp on existing sheet.

(xiv) 15 amp. Switch on existing sheet.

(xv) 3 pin 15 amp. multi socket on existing sheet.

(xviii) Bakelite sheet including fixing with brass Screws and washers.(White colour only)

(b) 3 mm thick

Pipe Laying Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required:- (HSR 31.21 (xv)} (xv) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on surface

(xvi) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface

(xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed

(xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed

(xxvii) Galvanised iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Upto length of one metre):- (c)Size 25 mm dia

(xxx) Supply and erection of PVC pipe of 6 kg. Pressure, laid 1 metre below ground level complete, including digging refilling of the trench with jointing etc:- (a) PVC pipe 120 mm dia

(b) PVC pipe 80 mm dia

Earthing (HSR 31.22) (i) Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required.

(ii) Extra for using salt and charcoal/coke for for pipe earth electrode as required.

(iii) Earthing with G.I. earth plate 600 mm x 600 mm x 600 mm x 6 mm thick including accessories and providing enclosures accessories and providing enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

(iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

(v) Extra for charcoal or coke and salt for GI / copper plate earth electrode.

(x) Pdg. and fixing 25x5mm copper strip in 40mm dia GI pipe from earth electrode as required.

(xi) Pdg. and fixing 25x5mm copper strip on surface or in recess for connections etc. as required.

(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I wire in 15 mm dia G.I. pipe from earth electrode as required.

(xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required with all labour and material

(xv) Pdg. and fixing 25 mm x 5 mm G.I strip on surface or in recess for connection etc. as required with all labour and material

(xvi) Pdg. and fixing 4.00 mm dia G.I. wire on surface or in recess for loop earthing as required.

Under Ground Cables :- (HSR 31.25) S/E of underground cables loose 1 meter below ground level covered with sand & brick including necessary connections,digging and refilling of trenches:- (iv) 10 Sqmm 2 core (armoured)

(v) 16 Sqmm 2 core (armoured)

(xl) 16 Sqmm 4 core (armoured)

(vi) 25 Sqmm 2 core (armoured)

Under Ground Cables :- (HSR 31.26) S/E of underground cables loose in existing pipe or trenches complete with necessary connections:- (iv) 10 Sqmm 2 core (armoured)

(v) 16 Sqmm 2 core (armoured)

(xl)16 Sqmm 4 core (armoured)

(vi)25 Sqmm 2 core (armoured)

Laying of underground cable 1 metre below ground level covered with sand bricks including excavation and refilling of trenches:- (HSR 31.27) (i) 2.5 Sq mm to 6 Sq mm 2 to 4 Core

(ii) 10 Sq mm to 16 Sq mm 2 to 4 Core

(iii) 25 Sq mm to 50 Sq mm 2 Core

(iv) 25 Sq mm to 50 Sq mm 3 to 4 Core

(v) 70 Sq mm to 95 Sq mm 3 to 3 ½ Core

(vi) 120 Sq mm to 150 Sq mm 3 to 3 ½ Core

(vii) 185 Sq mm to 240 Sq mm 3 to 3 ½ Core

(viii) 300 Sq mm to 400 Sq mm 3 to 3 ½ Core

Supply and erection of PVC tee/straight through joint (cable jointing kit) complete with required quantity of resin, hardner, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. (HSR 31.29) (ii) Straight through Joint (b) For 10/16 sq mm Cable 2 to 4 Core

(c)For 25/35 sq mm Cable 2 to 4 Core

(d) For 50 sq mm Cable 3 to 4 Core

(e) For 70 sq mm Cable 3/3 ½ Core

(f) For 95 sq mm Cable 3/3 ½ Core

(g) For 120/150 sq mm Cable 3/3 ½ Core

(h) For 185 sq mm Cable 3/3 ½ Core

(i) For 240 sq mm Cable 3/3 ½ Core

(j) For 300 sq mm Cable 3/3 ½ Core

(k) For 400 sq mm Cable 3/3 ½ Core

Miscellaneous (HSR 31.29) (ix) S/E aluminium lugs heavy duty i/c crimpng etc. EIC (c)10 Sq mm

(d) 16 Sq mm

(e) 25 Sq mm

(f) 35 Sq mm

(g) 50 Sq mm

(h) 70 Sq mm

(i) 95 Sq mm

(j)120 Sq mm

(k) 150 Sq mm

(l) 185 Sq mm

(m) 240 Sq mm

(n) 300 Sq mm

(o) 400 Sq mm

(xi) Supply & erection of cable route marker made of 50 cm long 10 mm dia M.S Rod welded/revitted at the top with 10 cm dia 5 mm thick G.I. plate inscribed with ‘cable’word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in existing trench 45 cm below ground level.

(xii) Dismantling old wiring points (not recessed) including necessary repairs to wall etc. (a) Light, fan or call bell Point.

(b) Wall socket point.

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) (i) Cable Size 1.5 sqmm (3/0.81mm)

(ii)Cable Size 2.5 sqmm (3/1.05mm)

(iii)Cable Size 4 sqmm (7/0.85)

(iv) Cable size 6 sqmm (7/1.05mm)

(v) Cable size 10 sqmm (7/1.35mm)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto to the entire satisfaction of the Engineer-in-charge of the work.(HSR 31.41) (v)4-Way, TP&N (Horizontal) (8+12)

(vi) 8-Way, TP&N (Horizontal) (8+24)

(vii) 12-Way, TP&N (Horizontal) (8+36)

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete upto the entire satisfaction of Engineer-in-charge of work (HSR 31.44) (a) 20mm dia

(b) 25mm dia

Supply and erection of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-charge of the work. (HSR 31.45) (b) 4 sqmm to 6 sqmm

(c)10 sqmm

(e)25 sqmm

Supply and erection of MS saddles and clamps on wall/RCC parapit for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to co,plete the job in all respect. (HSR 31.48)

Supply and erection of MS box made of 16 Gauge MS sheet recessed in wall, with arrangement of fixing brass screws, 2 Nos. check nuts and one No, PVC bush of required sixw including all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in Charge of the work. (HSR 31.49) (i) With 2 coats of primer.

(ii) With GI coating (anodized) suitable for modular accessories.

Pdg. And fixing modular type accessorism of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR 31.56) 10 amp. 1 way switch

10 amp. 2 way switch

20 amp. Switch

10 amp. Socket

16 amp. Socket

Bell Push

Fun Regulator

Call bell Ding-Dong (Monitca)

Blinking plate

Pdg. And fixing GI concealed sheet metal boxes with inner and outer face plate including conceaing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. (HSR 31.57) 1&2 Modules

3 Modules

4 Modules

6 Modules

8 Modules

12 Modules

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box, iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. (HSR 31.58) (i) PVC pipe of 32 mm dia

SITC of wall / free floor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zine/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rising. The panel having PU/Neopreme rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be having boltd type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (HSR 31.64)

S/F of rotary handle for on/off operation of existing MCCB in the LT panel complete in all respect. (HSR 31.66) (i) Rotary Handle below 125A MCCB

(ii) Rotary Handle Above 125A MCCB

HDPE Pipe S/E of Double Walled corrugated DWC HDPE Pipe laid 1 mtr Below Ground Level i/c digging refilling of earth i/c the cost of labour and material required to complete the job in all respect upto entire satisfaction of EIC (HSR 31.67) (i) HDPE Pipe 63/50mm OD/ID

S/E of module case circuit breaker single pole on wall on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69) 4 Pole MCCB 6 amp to 63 amp

4 Pole MCCB 100 amp

4 Pole MCCB 200 amp

Supply and laying of multi core telephone cable conductor size 0.5mm bright anneled copper conductor PVC insualted and sealed in existing pipe/channel and making necessary connections complete in all respect upto the entire satisfaction of the Engineer-in-charge of work. (HSR 31.78) 2 Pair telephone wire

5 Pair telephone wire

10 Pair telephone wire

S/E of cat 6 wire for internet make De-link (HSR 31.80)

NS Items:- S/E of reccessed type≤42 watt fullwindow glare free opal diffuse LED Panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated whire housing. Total system lumen of 42 watt LED should be 4600 or above in cool dry light (5700K), Power factor≥0.95, CRI (Ra)≥80, LED LAmp efficiency≥140lm/w, Average life>50000 hours, complete with all accessories as required with connections including 3 year defect liability period and free replacement in case of non functioning of the light fixture. (NS) Make: Bajaj, Havells, Philips

S/E of T-8 LED tube rod 20 wattTotal system of 20 watt LED should be 2000 or above in coll day light (5700 K to 6500 K) power factor> 0.95, CRI>80, Average life>50000 Hours Make: Bajaj, Havells, Philips (NS)

S/E of surface/ wall mounted ≤ 20watt integrated LED 4 feet fitting with epoxy powder coatted white/gray extruded Aluminum channel housing for efficient heat dissipation Total system of 20 watt LED should be 2000 or above in coll day light (5700 K to 6500 K) power factor> 0.95, CRI>80, Average life>50000 Hours complete with mounting bracket and accessories./Philiphs/Wipro Make ( Industrial )NS

S/E of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton ( NS )

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. (NS) Cable Size 1 sqmm (14/0.03)

S/E of flat PVC service wire 10 sqmm 2 core aluminum complete in all respect upto the entire satisfaction of the Engineer-in-charge of work. (NS)

S/I/T/C of push On/OFF type 25Amp modulator type motor starter switch for AC (NS)

Pdg. And fixing modular type accessorism of approved make in existing box including fixing and making necessary connections, complete in all respect.(NS) (i) Telephone Jack

(ii) RJ 45 internet jack

Wiring in 1.0 sqmm PVC insulated copper conductor cable in 25 mm dia PVC conduit pipe, medium gauge, ISI marked including cost of PVC pipe, modular metal boxes of suitable size (Anchor, M.K., EON, Legrand), copper wire, switch & socket (ordinary as per approved makes ), C.I. junction boxes, bakelite sheet 3 mm thick ( White Hylam ), screws with washers, making necessary connections & testing complete in all respect. (Recessed Type) (NS) FAN POINT :- (a) Short Point

(b)Medium Point

(c)Long Point

LIGHT POINT :- (a) Short Point

(b) Medium Point

(c)Long Point

(iii) Twin Control Light Point :- (a) Short Point

(b)Medium Point

(c)Long Point

(iv) Call Bell Point :- (a) Short Point

(b) Medium Point

(c)Long Point

(v) 5 Pin 5 amp plug point including earthing of 3rd pin with 1.00 sqmm copper wire. :- (a) Short Point

(b) Medium Point

(c)Long Point

(vi) 5 Pin 15 amp plug point with 2.5sqmm Pvc insulated copper conductor cable including earthing of 3rd pin etc. :- (a) Short Point

(b) Medium Point

c)Long Point

S/E of AC ceiling fan capacitor type complete with shackle 300mm down rod and regulator etc. Make USHA , Bajaj , Crompton (NS) (a) 1200 mm sweep

(b) 1400 mm sweep

BALWANT SINGH

Satpal Saharan Contractor

DINESH CONTRACTOR

Jaipal

M/s BG Construction Co

The Narayan Cooperative Multi Purpose Society Ltd

Suraj Bhan Contractor

R.S. Constructios Prop. Sunil

Kamal Sharma Contector