Special repair works for the existing 1 No. of SI and 29 Nos. of PC/HC quarters at SINDHUPOONDURAI in Tirunelveli District (Re-tender)

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

16.2) Supplying and fixing of Terracotta Jally (Not Below 50mm thick) a. In Ground Floor

b. In First Floor

c. In Second Floor

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

39) Supplying and fixing of MS Grills in position

41) Painting 2 coats - New "iron work"

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

Electrical arrangements 72) Supplying and fixing of Box type Fibre Fan hook

74) Charges for assembling and fixing of ceiling "Fan"

Annexure 3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture b. In First Floor

c. In Second Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture d. In Second Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 20mm thick a. In Ground floor

b. In First floor

c. In Second floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

18.1) Formwork using M.S.Sheet c. For Square and rectangular columns and small quantities

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 1000 x 2100mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

32.1.4) Pointing the pressed tiles with C.M. 1:3 mixed with WPC using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border

b. 75 mm wide Border

c. 50 mm wide Border

37.2) White washing two coats for old ceiling surfaces

38.4.3) Painting the old wall with One coat of Oil Bound Distemper over the Existing wall surfaces including thorough scrapping

40.1) Two coats of painting over the old wood work including thorough scrapping

41.1) Two coats of painting over the old iron work including thorough scrapping

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming lS: 694:1990 for Fan point (Open wiring)

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring)

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5.1) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.7.1) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts LED bulb for bulk head fittings

125) Supplying and delivery of following dia PVC Pipe a) 160mm dia PVC pipe/6 Kg/cm2

132) Drilling of 150mm dia borewell in hard rock areas

132.1) Drilling of 150mm dia borewell in over burden soil including labour charges for inserting casing pipes and including cost of Rig, Fuel etc.,

134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the casing pipe

272) Providing two legged scaffolding using 13 to 15 cm dia casurina post with country wood planks (Silver Oak) 40mm thick a) For 3.00m height

b) 8.00m height in addition to 2.5m height

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.6.1) Supplying and fixing of Granite tile of size 2'x1', 10mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a. In Ground Floor

b) In First Floor

c) In Second Floor

796.2) Painting the old walls with one coat of Plastic emulsion paint including one coat of primer and including thorough scrapping

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of pressed tiles and weathering course

800.3) Clean removal of cement plaster from the existing wall surfaces

800.5) Clean removal of Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed Tiles / Clay Tiles / Cuddapah slabs

MASANAMUTHU.S