A Fabrication of shed along with wiring near Regional store substation under CCD, Dhori Area. B Shifting of pole and heightening of boundary wall, provision of concertina wire fencing and floor PCC of substation near Regional store substation un

Amount

Part-A

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLSPV Cinsulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes ofF RLSPVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light point/ fan point /exhaust fan point/ callbell point with 1.5 sq. mm FRLSPVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm. FRLSPVC insulated copper conductor single core cable etc.as required.(Bulb-15,Fan 3,Tube 12)

Supplying and fixing metal box of 150mm X75nnm X60mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket out let and 5/6A piano type switch, connections, painting etc. as required.

Supply in gand fixing metal box of 180mm X100mm X60mm deep (nominal size) on surface or inreces swith suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 &15/16A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Earthing with G.I. earth plate 600mm X600mm X6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25mm X5mm GI. Strip on surface or inrecess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prongattop, with 85mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying and fixing 5A to 32A rating, 240/415 V, 10kA ,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOBDB complete with connections, testing and commissioning etc. as required Triple pole and neutral

Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prongat top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying and laying 25mmX 5mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Earthing with G.I. earth plate 600mmX600mmX6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and water ingpipe of 2.7 metre long etc. with charcoal/coke and salt as required.

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work.

Painting with aluminium paint of approved brand and manufacture to give an even shade

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved painton overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.

Providing ridges or hips of width 60 cm over all width plain G.S.sheet fixed with polymer coated J or L hooks, bolt sand nuts 8 mm dia G. I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1cement: 2 coarses and (zone-III) derived from natural sources:4 graded stone aggregate 20 mm nominal size derived from natural sources)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLSPV Cinsulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Fitting and fixing of light 50 to 100 W on structure in or out side of shed.

Fabrication of iron materias like angle and joist

Errection of iron materials like angle and joist

Providing of foundation bolt 5 ft. long 5/8 with nuts.

Earth work by mechinicalI manual means in roughe xcavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with Y: tonne roller or wooden or steel rammers, and rolling every 3rdand top-most layer with power roller of minimum 8 tonnes and dressing up in embankment sforroads, floodbanks, marginal banks and guide banks or filling up ground depressions, lead upto 50m and for all lif:

Part-B

Erection of steel pole tubular or rail pole strut concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Transporting of pole.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Dry brick on edge flooring in required pattern with bricks of class designation 5.0 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of whiting.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing concertina coil fencing with punched tape concertinacoil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement : 4 fine sand)

Half brick masonry with common burnt clay F.P.S. (non modular) brick of class designation 5.0 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand).

Supplying and stacking at site : 53 mm to 22.4 mm size stone aggregate.

Total impact of GST for the purpose of CTC