55/W/EDC-I/SRE/2021-22

Amount

Detail of Work

Safety cartage of PCC Pole/SP 55 Pole from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Safety cartage of other lines material (Except PCC Poles) from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Providing of Holding clamp with nuts bolts made of new MS flat iron 50x8 mm on PCC poles.

Providing of F clamp with nuts bolts made of new MS flat iron 50x8 mm on PCC poles.

Fixing & installation of 100/63on the D/P with complete fitting.

Fixing of Distribution Box on PCC Pole With providing sutable claim and connection

Erection of single support on SP55 Poles with complete fitting of all accessories of LT & HT line.

Laying, lifting, and Stringing proper sagging ABC cable of site 3x95 + 1x70 + 1x16 sq.mm, 3x50 sq.mm including fixing of all type clamp and connector providing all accessories

Fabrication and Erection of D/P on PCC poles/SP55 8.5 Mtr. Long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per RESPO specification.

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Pole of earthing by earthing rode.

Laying, lifting, stringing, sagging jump ring & binding of ACSR Rabbit conductor for HT Line.

Laying of LT PVC cable 3.5X150 sq. mm. from T/F to D/P with complete fitting as per respo specification.

Of shooting of tree branches touching the above 11 kv line. (No of tree Approx 400 no.)

M/s Ayushi Enterprises

Omveer Singh Contractor and Enggineer