Construction of Compound Wall , Septic Tank and Improvement Works to the UHWC at Maniyakarampalayam in Ward No.19, North Zone.

Amount

Earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and BG 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed

For Footing,Grade Beam

For Column

For Beam Slab

Cement Concrete 1:1.5:3 (one cement,One and Half sand and Three aggregate)using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete

Supplying,fixing and placing in position mild steel /ribbed torsteel rods for all RCC works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods)

Fly Ash Brick Work in CM 1:4 (One Cement & Four Sand) Using Size 9"x4 3/8"x2 3/4" Including Finishing,Curing,Etc., Complete complyingwith Standard specification.

Plastering with cement motar in cm 1:3 (one cement and Three sand) 20mm thick in all floors complying with standard specifications

Plastering with cement motar in cm 1:5 (one cement and Five sand) 12mm thick in all floors complying with standard specifications

Supplying and fixing of MS GRill using 'L' angle,MS Flat ,SQ rod and MS sheets etc., completecomplying with standard specifications as directed

Paving the floor with GRANITE SLAB (SUPER FINE POLISHED WITH MACHINE CUT EDGES) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the granite slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete.

Nosing for Granite

Supplying and Fixing of Eurocon tiles M30 Grade of approved quality laid in cm 1:3 and finishing the Joints with suitable colour cement as directed by Departmental officers

Supply & Fixing of U-PVC Doors, Using EG - 017- 1 (66mm x 46mm x 48mm 1.06kg/mt)for the Outer frame and U-PVC Profile for shutter sash EG - 038 (104mm x 46mm x 86mm 1.8kg/mt)Mullion EG - 019 (46mmx72mmx36mm 1.1kg/mt) Glazing Bead (24.5mm x 16mm 0.210kg/mt)6mm Plain glass All profile are properly reinforced with 1.25mm GI Channel for additional strength and sturdiness.Using suitable EPDM gasket for long lasting energy saving performance. Using imported quality hardware with and Using all time weather proof neutral sealants. Guarantee for a perfect blended performance with aesthetic elegance.

Supplying of HDPE Tank

Providing 3coats wall putty for ceiling and wall works etc.,complete

Painting with two coats of plastic emulsion with approved colour best quality paints as per the direction of departmental officers

Painting with enamel paint two coats using good quality and approved colour for new Iron works etc., complete

Supplying of Electronic Regulator

Supply and fixing of single box type 27 W LED fitting complete with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications.

Supplying and Fixing of 11W LED Bulb

Supply and fixing of 1200 mm (48”) Sweep AC lCeiling fan complete with stepped electronic regulator and remote with down rod on the existing clamp.

Supplying of 3 Phase Service Box

Supplying of 63A 4pole ELCB

Supplying of 63A Fuse Carrier

Supplying of Light Indicator

Supply and run of 4 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains(SD72)

Supplying of 16A MCB

Supplying of 6A MCB

Supplying of 15mm twoway tap Metro Zico

Supplying of 15mm Health Faucet

Supplying of 15mm CP Long Body Tap

Supplying of 15mm Angle Cock

Supply of Extension Nipple 15x25

Supply of 18" PVC Connection

Supply of 15mm Pillar Cock Tap

Supply of CP Flange

Supply of NOVA SLM PRO Single Flush Polymer

Providing Alco Paneling Work using Aluminium Sections 2'x1' for frame works and Finished with 4mm Alco Paneling Sheet Including all cost of labour and Scafolding Etc., Complete

Filling the area with well gravel including cost and conveyance of all materials from approved quarries including loading unloading and stacking the gravel etc., Complete as perspecifications

Cement Concrete 1:2:4 (one cement,Two sand and Four aggregate)using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete

Supply of RCC Precast Slab 50mm Thick in 1:2:4 mix Using 20mm Size Broken Jelly Including Steel molding Charges,Curing Etc., Complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete PWD SOR Pg. No. 63 Sl.No. 239

Supplying and Fixing of Cuddappah Slab for Chamber Covering

Supplying and Fixing of 600x600mm Square SFRC

Supplying of 110mm PVC Pipe 6kg/cm2

Converyance the debris, earth, silt etc from the site to 15 km distance

N.Guruvayurappan