COMPREHENSIVE MAINT OF MES INSTALLATIONS, MES OTM OFFICE COMPLEX AT VAYUSENA NAGAR, NAGPUR

Amount

Material and labour for prepartion of old plastered/unplastered surface of walls incl cornices, pilasters etc & applying 1 coat of white wash on walls complete all as specified and as directed.

All as per item No 1 above but two coats of white wash on walls complete all as specified and as directed.

All as per item No 1 above but one coat of white wash on ceiling complete all as specified and as directed.

Material and labour preparation of old distempered sufaces of walls by washing, rubbing down and stopping of distempered surfaces incl repair of damaged portion by applying wall care putty to achieved smooth surface and applying one coat of oil bound distemper with roller on walls complete all as specified and as directed.

All as per item No 4 above but two coats of oil bound distemper with roller on walls

All as per item No 4 above but one coat of oil bound distemper with roller on ceiling

Material and labour for complete removal of existing treatment of wall surfaces and applying 1mm thick wall care putty and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using painting roller/brush complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding complete all as specified and as directed.

Material and labour peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour peparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for prepartion of old plastered/unplastered surface of walls incl washing, rubbing down and stopping of painted surfaces etc & applying one coat of cement base paint complete including filling of hole, cracks etc with lime putty or plaster of paris all as specified and as directed. Note :- Shade and pattern of the colour shall be approved by GE.

Material and labour for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etcc & applying two coats of cement base paint complete including filling of hole, cracks with lime putty or plaster of paris all as specified and as directed. Note :- Shade and pattern of the colour shall be approved by GE.

Material and labour for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding complete all as specified and as directed.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm including filling of hole, cracks etc with lime putty or plaster of paris etc complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding over complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through airless spray machine (only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied. (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application. (iii) The qouted rate shall deemed to be included cost for provison of all safety instruments/scafolding/material & saftey of individuals , insurance etc all are contractor's responsibility.

Material and labour for preparation of old decorated surfaces in walls, soffits, facia roof etc and applying one coat of weather proof premium acrylic based emulsion paint (100% acrylic) as per manufacturers instructions etc complete all as specified and directed. Note :- Shade and pattern of the colour shall be approved by GE.

Demolition of brick work/stone boulder masonry built in cement mortar in any position complete all as specified and directed.

Material and labour brick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Material and labour for Brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:4) complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone/PCC block masonry walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces of wall in CM (1:4) finished even and smooth without using extra cement but using water proofing compound @3% by wt of cement complete all as specified and as directed. Note : - WPC shall be measured and paid separately

Supply only water proofing compound complete all as specified and directed.

Material and labour for rendering 5 mm thick in CM 1:3 on concete surfaces, finished even & smooth with out extra ement in ceiling complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two coats of oil bound distemper over a coat of alkali resistant primer of required shade and colour complete, as per manufacturer's specification using painging roller/brush etc complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying 3 coats of white wash complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of ceilings and applying two coats of distemper oil emultion over one coat of primer paint roller complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding if required at site. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Note :- Shade and pattern of the colour shall be approved by GE.

Material and labour for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint at any height including necessary scaffolding if required at site complete all as specified and as directed

Material and labour for preparation of surfaces of floor and applying one coat of floor guard of approved shed to paver tile, blocks, kerb stone etc .complete all as specified and as directed

Material and labour for of old painted surface of stone work of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but not exceeding 4.00 sqm each and removal from site complete all as specified and as directed

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Material and labour for aluminium framed doors/windows/ventilators sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed. Note-: glazing/gauzing shall be measured and paid separatly

Supply and fixing of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified and as directed.

Supply and fixing for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and as directed.

Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described all as specified and directed.

Supply and fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed all as specified and directed.

Supply and fixing 150 mm long aluminium anodised handles, cast type all as specified and directed.

Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

Supply and fixing for 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.

Supply and fixing of double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixing mild steel 4 levers mortice lock, vertical type, size 100 mm all as specified and directed.

Supply and fixing door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

Supply and fixing Sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to any metal/PVC/UPVC section complete all as specified and directed.

Supply and fixing sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to any metal/PVC/UPVC section complete all as specified and directed.

Supply and fixing 12mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for each shutter, stainless steel locking arrangement including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and as directed.

Supply and fixed of Sun control/frosted film of 50 micron, reflective type and stick to any type of glass panes complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

Material and labour Cement Concrete(1:4:8) type D2 (40mm graded) in foundation filling and mass concreting, sub base floor etc complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Supply and fixing of Steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Material and labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and as directed.

Supply and fixing Pre- painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and demolished meterial to be removed out side of MD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises complete all as specified and as directed.

Material and labour for providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces even and smooth using extra cement complete all as specified and as directed.

Material and labour for providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Material and labour for 100 thick cement concrete type D2, 1:4:8 (40 mm graded aggr) as in sub base complete all as specified and as directed..

Material and labour for factory made machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning complete all as specified and directed

Material and labour for premium quality non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and directed

Material and labour for premium quality digital glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and directed.

Supply and fixing any shade/double charged/ultracharged vitrified tiles 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fixing light shade vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles exc 0.36 sqm but not exceeding 1.00 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and directed.

Material and labour for vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 all as specified and directed.

Material and labour for vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm bore dia complete all as specified and directed.

all as item No 77 above but 20 mm bore dia.

Supply and fixing in repair chromium plated fancy type stop cock/angular cock , cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed.

All as per item No 79 above but fixing only in repairs.

Supply and fixing in repair 15 mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

All as per item No 81 above but fixing only in repairs.

Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified.

All as per item No 83 above but fixing only in repairs

Supply and fixing in repair hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & wall hook complete all as specified and directed. Make ;-Jaquar CODE-ALD 587 or equivalent to Parryware/ Hindware

All as per item No 85 above but fixing only in repairs

Supply and fixing in repair 2-way Bib Cock with wall flange, chromium plated, 15mm dia complete all as specified and directed. Make ;-Jaquar CODE-FUS-29041 or equivalent to Parryware/ Hindware

All as per item No 87 above but fixing only in repairs

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality.

Supply and fixing in repair Soap Dish brass chromium plated decorative type approximate size 160x90mm complete all as sfd and directd.

All as per item No 90 above but fixing only in repairs

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as sfd and directd.

All as per item No 92 above but fixing only in repairs

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as sfd and directd.

All as per item No 94 above but fixing only in repairs

All as per item No 96 above but fixing only in repairs

Supply and fixing in repairs vitreous China wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as sfd and directd.

Supply and fixing in repair plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

All as per item No 101 above but fixing only in repairs

Supply and fixing in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified and as directed.

Supply and fixing in repairs vitreous china urinals, flat back, bowl type of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and as directed.

Supply and fixing in repair of waste pipe of 40 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified and as directed.

Taking down rain water or soil waste pipes (any size or pattern) ,including all fittings complete all as specified and as directed.

Material and labour for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and as directed.

Supply and fixing PVC(SWR) bend 110mm bore complete all as specified and as directed.

Supply and fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall complete all as specified and as directed.

Supply and fixing PVC (SWR) bends, 75 mm bore complete all as specified and as directed.

Supply and fixing PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap complete all as specified and as directed.

Material and labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Material and labour for grinding and polishing of existing floor of stone slab like marble, granite, kota etc by using mechanical grinder/floor polish machine and finally cleaning and treating the surface with beeswax polish etc complete all as specified and as directed.

Material and labour mild steel frame work such as grills, gratings, gates, framed guard bars, barred iron doors, ladders, framed balusters, walkway, railings etc with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 complete all as specified and as directed.

Material and labour for solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet in strips and channel feathered at the edges for fixing on existing walls or PVC frame as required at site inclusive of solvent cement etc complete all as specified and as per manufacturers instructions including removal of old wall panelling. Note : - Colour/ shade of PVC panel shall be approved by GE.

Supply and fixing in repair of aluminium composite panels shall consist of following :- (i) 3 mm thick thermoplastic core of any LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4 mm with outer surface finished with PVDF based coating 30 micron, inner surface finished with a thin coat of polyester paint complete all as specified and as directed. (ii) Aluminium framing of section 38 mm x 50 mm x1.50 mm thick. (iii) Aluminium grid shall not be exceed 1.0 Sqm each the aluminium grid shall be fixed with clamp 40x6 mm not more than 1 m c/c (iv) Colour shall be approved by GE.

Taking down old MS window shutter not exceeding 1 sqm each including cutting old hinges and refixing in same opening after necessary repair work and changing MS hinges of any type including welding to old frame complete all as specified and as directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 3 mm thick fixed to aluminium section complete all as specified and as directed.

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Material and labour for providing 10mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified and as directed.

Material and labour for exposed metal frame ceiling with non asbestos fibre cement building boards of 4mm thick of 600mm x 600mm size fixed or laid / inserted to GI framework with appropriate numbers of hangers with screws complete all as specified and as directed.

Supply and fixing in repair of harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two Nos of brackets, stops for each rail complete all as specified and as directed.

Dismantling of old textile roof treatment of any type including roof tiles (if any) including cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. etc complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and as directed.

Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extra cement all as specified and directed. (WPC shall be measured and paid separately)

Material and labour for liquid water proofing on concrete/plastered surface for roof/chajjas by applying 1 coat primer of Tiki Aquaseal ARR/PU S/PU AHS, sika or equivalent and then applying 2 coat of Tiki Aquaseal ARR/PU S/PU AHS, sika or equivalent as per direction of manufacturers including cleaning of existing surface complete all as specified and as directed. Note: Work shall be carried out through authorised applicator of the approved product only.

Material and labour for surface dressing n. exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for preading and levelling in layers n. exc 30 cm thick of approved fertile soil for lawn like Loam, Alluvial soil etc including raising earth , well ramming including watering as required and approved earth out side from MoD land etc complete all as specified and as directed. Note : Soil sample to be approved by GE.

M/s Prakash R. Verma (BID ID -3436786)

Dua Construction (BID ID -3437132)

Bidder Name

M/s Prakash R. Verma

Rajveer Infrastucture

Dua Construction