Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹16.9 L
EMD Value
₹25,000
Closing Date
17 Feb 2024, 4:58 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
Executive Engineer
Construction of Anganawadi Building to Anganawadi center No. 176 at Holihosur village in Bailhongal Taluka
RDPR/2023-24/BD/WORK_INDENT2810/CALL-2
RDPR/2023-24/BD/WORK_INDENT2810/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Belagavi
8 documents required · 8 mandatory
Tenderer must Submit PAN & GST Certificate.
Caste Certificate
PRED/PWD Registration Certificate
Work done certificate for similar nature of Work from Competent authority Rank of Executive Engineer & above
Annual Turnover Certificate for at least last five years
Work orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer
UDIN is Preferred
Line of Credit WITH Bank Letter Head
Name and Address of Contractor for Communication
₹500
₹25,000
9 Feb 2024
9 Feb 2024
19 Feb 2024
16 Feb 2024
Anganawadi Building
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite ...
Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materia...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manu...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm with all lead, lifts, loading & unloading charges including cost and conve...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. with all lead, lifts, loading & unloading charges including cost and conveyance of...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, ...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, ...
Electrical works
Open Conduit System : Supplying heavygaugePVCconduit pipe ....... dia .......mmthick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , and fixing using inverted wood ...
Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction boxVolume 6 with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equi...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall with all ...
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50HzAC supply& completely wired on existing box. with all lead, lifts, loading & unloading char...
Supplying and drawing PVC insulated flexible copper wire of approved make as per IS: 694: 2010 23/0.0040" with all lead, lifts, loading & unloading charges including cost and conveyance of all materia...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying 6A flush type socket and 6A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way with all lead, lifts, loading & unloading charges including cost ...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable form ounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine/NF...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tape red wooden plugs or phill plug sorrawl plugs and clamped using heavy gauges add lesatan interval of 300mm using NFsc...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5A. ceiling rose, necessary len...
Supplying capacitor type ceiling fan complete with down rod blades,shackle ,canopies etc, for operation on 230V,50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball bearing...
Supplying of .....feet-PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@
50/60Hz&Power ...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of
Supplying & Fixing of 70-150 W lamp holder 2 Pin with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incide...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour,...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. with all lead, lifts, loading & unloading char...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, eq...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
C.P. Brass bibcock 15 mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required fo...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1 Holihosur Indent No-2810.docx
Others - KW-1 • 0.09 MB
Corrigendum-7.docx
Others - Corrigendum • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .