Pacakage 1 Hathin- Augment...

Amount

Cutting of longitudenal joints 10mm to 12mm width and 150mm depth of CCpavement of dismanling of CC Street with citterv machine including all TandP and labour.

Providing and fixing 200 mm i/d U type C.I. Bend Including tail pieces, glass wool wire gauge, with MS Sheet 3 mm with Holes Nut and Blot and Rubber Sheet etc. complete in all respect.(44Kg. U Type bend and 36 Kg Tail Piece each)

`Providing and fixing Float operated water gauge 6” wide 15’ height painted and marked with in feet With bottom flange for fixing and pulley on top with 10” i/d copper ball with steel wire rope complete in all respect.

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications

Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications

Making ‘T’ connection from newly laid pipe line/or from Boosting line/ or from T/Well rising main to existing charged lines machinery bailing out water, cutting, jointing, testing complete job.

1. Providing and fixing aluminum ladder 1’ wide With 1’ center to center aluminum rod of 20 mm i/d complete in all respect. (20’ Long)

Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head as per the indicated requirements of discharge in 5000LPM and 50 power capacity in BHP and 25 mtr Head

HT. ALLUMINIUM CABLE: Supply erection testing of standard make ALPE 3 core HT / 11 KV grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment. b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables / CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd. 35 Sqmm size

LT CABLE ALLUMINIUM: Supply, erection,testing and commissioning of IS marked 3.5 core Cables, Solid Aluminum conductor up to 10sqmm and balance stranded conductor, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Aluminium wire for single core up to 70qmm and balance Aluminium strip, Glavanised wire for cables up to2x10sqmm, 3x10sqmm, 4x65qmm and balance all galvanized steel strip) extruded PVC type ST2 Outer sheathed, 650/1100V grade as per IS7098 (Part-1) 1988 with up to date amendments along with all accessories complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd. 150 Sqmm size

COPPER CABLE: Supply, erection, testing and commissioning of is marked 3 core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.55qmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2 Outer Sheathed, /1100 V grade as per IS 7098 (Part 1) 1988 with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd. 16sqmm 3 core

COPPER CABLE: Supply, erection, testing and commissioning of is marked 3 core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.55qmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2 Outer Sheathed, /1100 V grade as per IS 7098 (Part 1) 1988 with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd. 50sqmm 3 core

Supply, erection, testing and commissioning of horizontal spindle split casing type pumping sets of following duties directly coupled to AC Squirrel cage induction type motor with starter and acessoried etc. complete in all respects all priming arrangement 2400LPM BHP 30 HEAD 30

Providing Houseld tap connection ( FHTC ) with restoration of streets including brass/Gun Metal ferrules 10mm , G.I Pipe 15mm dia ,Bib cock 15mm dia and clamp with nut bolt of required sizes complete in all respect as per direction of Engineer.

Providing and fixing of DI sluice valve of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge ` 350 mm i/d Class I

Providing and fixing of Residential Water Meter on House connection of Brass, 4 stage residential, display analog operating temperature 50 degree C.As per IS Specification of reputed make.

Supplying erection and testing of Variable frequency drive for 7.5 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge.

Supplying erection and testing of Variable frequency drive for 15 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge

Supplying erection and testing of Variable frequency drive for 20 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge

Supplying erection and testing of Variable frequency drive for 25 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge

Supplying erection and testing of Variable frequency drive for 30 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge

Supplying erection and testing of Variable frequency drive for 50 BHP Horizontal Centrifugal Motor Compatible to work with cable length of 300 meters and to ensure that there is no voltage drop , Variable frequency drive IP66 with mains Disconnect having Modbus Communication and designed at 50 Degree Celsius without any deration with inbuilt real time clock for time assistance. Variable frequency drive All Electronic cards should be 3C3 Coated. Variable frequency drive with Dual DC choke at both the Limbs with 5 % Impedance. Variable frequency should be having all protection features like Dry Run detection, Derigging, Automatic energy optimization, Low flow detection, sleep mode, complete in all respect including earthing and its connection, erection and commissioning complete in all respect to the entire satisfaction of engineer in charge

Gas Chlorination: Providing, fixing,testing and commissioning of Vacuum Gas Chlorination system of rating 2000 grams per hour having the control of gas 20th part of max. dose and which can start working automatically on switching in the supply of water at the site of boosting station consisting of following parts:- a) vacuum regulator b) flow meter with control valve assembly c) Differential pressure regulator d) Pressure relief valve e) Vacuum relief valve f) Online Chlorine Analyzer for chlorine and turbidity of water g) Auto Shut off Valve h) Automatic Switchover System (1 Working plus 1 Standby) i) 2 nos. filled of chlorine cylinders of capacity 100 kg duly certified and approved by BIS and explosive department Govt. of India j) Chlorine Gas Detection System(chlorine leak detector with hooter and sensor) k) Chlorine Gas Scrubber including spanner with cylinder opening key, 2 set connectors, iron cage guard, safety equipments consisting of chlorine mask with canister and complete installation of the equipments and all other works contingent thereto as per detailed specification as per Annexure A and as per satisfaction of Engineer-In-Charge including operation and maintenance of entire system during defect liability period of 1 year after successful trial run period of 3 months and thereafter operation and maintenance for 5 years.

Bidder Name

Amount

Rajesh Kumar(GSTN-NA)--1108717

RAJEEV KUMAR GOEL CONTRACTORS(GSTN-NA)--1108517

RAJEEV KUMAR GOEL CONTRACTORS

RAJEEV KUMAR GOEL CONTRACTORS