CERTAIN REPAIRS TO TILING, JOINERY, FLOORING, ROOFING, FALSE CEILING, SANITARY WORK, PERIODICAL WORKS AT OTM ACCN OF 114 INF BN(TA) AND 431(I) ASC SUPPLY DEPOT UNDER AGE(I) FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for providing chequered cement concrete tiles of size 25cm x 25cm x 20mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 300x450x7mm thick on vertical surface over 10mm thick rendering in CM 1:6 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M & L for framed work such as guard bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.

MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Factory made 35 mm thick Plain, framed,panelled shutters(any number ofpanels), withpanels of timber flat on both sides(feather edged), orof veneered particle board mediumdensity, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.

S & F in repair curtain rod PVC coated mild steel rod 20 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

Taking down Aluminium door with shutter exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

Taking down Aluminium window with shutter not exc 1.5 sqm eachcomplete all as specified and directed.

S & F Anodised aluminium frame work for door made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as hinges type 150 mm long (3 no.) suitable handle(2 No.), 150 mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified.Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed.

S & F Anodised aluminium frame work for window/ventilator made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2 no.) suitable handle(1 No.), 100mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified.Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality exc 0.5 sqm each all as specified and directed.

S&F Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M&L for Complete removal of existing treatment of wall by scrapping down wire brushing etc and applying two coats of oil bound distemper over a coat of chalk whiting with including preparation complete all as specified and directed.

S&F Vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover,hand shower including all fittings complete all as specified and as directed .

S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyethylene triple layer water storage tank vertical with closed top of 500ltrs capacity including 20mm dia bore float valve and fixed in position all as specified in SSR Part-I including disconnecting existing tanks all as specified and directed by Engineer-in-Charge.

Ditto as above but for 1000 Ltr Capacity complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe all as specified and directed by Engineer-in-Charge.

M & L three coat of white wash on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of chalk whiting resistant primer including preparation all as specified and directed by Engineer-in-Charge.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation all as specified and directed by Engineer-in-Charge.

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering all as specified and directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

S&F in repair False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction.

Preparation of old surfaces of Wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent salts, trading oil and greasy spots etc and applying One coat of white wash over old decorated surface of walls all as specified and directed by Engineer-in-Charge.

…..ditto as aobve but on Ceilling ….ditto…..

Washing, rubbing down and stopping of old distempered surfaces including preparation and applying one coat of oil bound distemper on walls all as specified and directed.

Preparation of old surfaces of Wall and applying one coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge.

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of Anti Fungal Weather Coat Exterior Emulsion paint on walls all as per manufacturer instruction and as directed complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed..

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side Defence Land including Cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in RCC roof surface finished even and smooth using extra cement including necessary form work complete all as specified and directed.

M & L for water proofing treatment to roof slab with APP modified polymeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickness 3 mm, weight not less than 3.00 kg/sqm with 100 mm side overlap and 150 mm end lap and laid with following course of descriotion below :- (a) Applying evenly a coat of bituminous primer conforming to IS 3384 - 1965 @ 0.50 ltr /Sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowed to evaporate completely. (b) Second coat of bonding material using hot blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS 702 - 1988 over bituminous primer. (c) Third course i.e. laying of APP modified polymeric membrane describe hereinbefore with 100 mm over lap in longitudinal direction and 150 mm in transverse direction, all joints and changes in all diretion should be curred with cement mortar (1 : 3 ) mixted with SBT Latex @ 200 ml per bag of cement and curred well before laying the membrane.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified.

M&L PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment , over 20 mm th sand filling including dismantling all as specified and directed.

M/S S P CONSTRUCTION

M/s Moti Babu Agarwal

m/s udit constructions

Shree Gopal Engineers & Contractor

M/S Arvind Electricals

M/S shree traders

M/S SRI JAGDAMBE TRADERS