INCREASING CAPACITY OF 4 NOS 250KVA TO 400 KVA AT DIFERENT PLACES

Amount

CARTAGE OF STORE ITEMS FORM ESC, RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONG WITH LOADING, UN-LOADING AND PROPER STACKING

loose line material ABC 3X95 ESC Tripula Store Center Raebareli ti work Side

Cortage of New 400KVA T/F

Errection

Dis-mounting of 250KVA T/F From plinth and Mounting of New 400KVA T/F on Plinth.

Construction of Plinth size 1.5X1.5x1.5 Mtr. alongwith 0.5Mtr. foundation of first class brick and brick blast also proper ratio of cement and red sand. Complete in all respect as per RESSPO norms.

Fabrication of wiremesh fencing of Distribution T/F of size 2.5x2.5x2Mtr. By M.S angle of size 35x35x5mm and MS flat of size 25x5 mm with wiremesh and grouting of the grouted with grouting material. Complete in all respect as per RESSPO Norms.

Digging of 2x60 feet deep boring type neutral and body of distribution T/F at different places and welding of G.I strip including the cost of M.S. pipe 1.25 Inch dia, 2*40 feet long and MS strip 25*3 mm of suitable length for connecting M.S pipe to neutral through proper welding or bolt and nut. All material, consumables and T&P will be privided by contractor.

Laying of ABC cable of size (3X95)mm2.complete in all respect as per norms

Construction of Henely type tailles fuse unit 350Amp. (Two Circuit) for 400KVA Distribution Transformer Sub-Station

Construction of massonary type Distribution pillar box with first class brick ballast cement couarse sand, local sand , bric ballast , and MS Round bar of 10mm dia including straight MS Angal 50X50X6X750 mm for 250 KVA LT Substation (All the material will be arranged by the contractor)

Fixing of Henley type tail less Fuse unit 350 Amp, 650 Volt consisting of 6 Nos Brass Back entry, 6 Nos U-type Spny contact made of Copper, Brass coupling with Porcelain fitted on the GI sheet of 16 SWG with arrangement of 1 Nos Neutral link alongwith Copper bus-bar of size 750X50X6 mm made of electric copper strip for 400 KVA Transformer and required size GI Nut, Bolt and Washer with proper connection of LT single core PVC Cable of required size (cable will be provided by the department) (GI Nut, Bolt and Washer Will be arrange by the contractor).

Fixing of Copper L-piece suitable for 400 KVA Transformer of size 125X75X50X6 mm made of electrolite Copper strip (99.9% Purity) with required size (240/400 Sq. mm) Alluminium Crimping Lugs (99.9% Pure A-grade Alluminium). (All the material will be arranged by the contractor).

Repair & extension of existing wire mesh fencing around Transformer and Distribution Pillar Box with retaining Wall & 1 No. gate with locking arrangement made of MS Angle iron of size 50X50X6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50X6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. (All the material will be arranged by the contractor).

Material Provided by the contractor

Henly type tail less fuse unit 350Amp., 650 volt consisting of 06 Nos Brass back entry, 6Nos. U-type spring contact made of copper, brass coupling with porcelain fitting on the GI sheet 16SWG with arrangement of 01 No. Neutral link.

Copper bus-bar of size 750X50X6mm made of electroytic copper strip.

Copper L-piece suitable for 250 KVA T/Fof size 125X75X50X6mm made of electrolote copper strip (99.9%purity)

Alliminium crimping Lugs 300sqmm (99.9%Pure A-grade Alluminium as per sample)

SUSPENSION EYE-HOOK

LTMS CLAMP

M/S Shiv Traders

NATIONAL ENTERPRISES