REPAIRS REPLACEMENT OF INTERNAL ELECTRIFICATION DISTRIBUTION SYSTEM INCLUDING FIXTURE AND FITTINGS WIRING AT ELSEC CPDC DSC LINES AND TECHNICAL AREA ZONE-II AND CERTAIN MISCELLANEOUS WORKS UNDER GE I RND RCI HYDERABAD

Amount

Taking down point wiring of any description from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) and accessories fixed to surface of walls/roof/ceiling with PVC sleeve/dash fastener and cadmium plated screws etc., with and including modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

One light/fan point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

All as per item No. 2 above but with 2.5Sqmm FRLSH cable for 5pin 15Amps socket outlet on independent board and 2.5Sqmm FRLSH cable for the earth continuity conductor

S&F, Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 2 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular step type fan regulator, 120W, 2 module complete all as specified and directed.

S&F, Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 4Sqmm 1100Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note for item No 11 & 12: Two runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

M&L in repairs, Sub main wiring with 4runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 25mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note : Four runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

S&F in repairs, Ultra bright 18W LED PL-L lamp with very high efficacy suited for installation in existing 2G11 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAPLL419TL18WLED 865SPC or techno commercially equivalent of Phillips / Wipro

S&F in repairs, 15watt LED recess mounted luminaire suitable for Armstrong/POP ceiling with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTO1X1PLR15WLED857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, recess mounting 42W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE2X2R18-42WLED857 MODUGR<19 along with Driver LEDDRIVER36V1A42WS or Philips CAT No RC 380 B LED 43 S-6500 G5 L60 W60 PSU OD or Techno commercially equivalent in Wipro

S&F in repairs, recess mounting 28W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE4X1PLR28WLED 857S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, flat panel 1x1, 15watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTOSURFACE1X1PLS15WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, flat panel 2x2, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLANOSURFACE2X2PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, flat panel 4x1, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLANOSURFACE4X1PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, recess mounted 10W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR10WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 15W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR15WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 24W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR24WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 45W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No SPARKLEPROFIXDLR45W857MOD 60DWHTNEEM with L.SPARE LED DRIVER 45W 36V 1100mA or Techno commercially equivalent in Philips/Wipro

S&F in repairs, CMRI certified 2X20W LED flame proof tube light fitting with IP65 protection and with all accessories complete all as specified. Make: Crompton Greaves Cat No EXTN2LT8-20 or Techno commercially equivalent in Shyaam/Baliga/Sudhir

S&F in repairs, flame proof 60W LED well glass light fitting in die cast Aluminum housing with heat resistant toughened glass IP65 protection, recommended for gas/vapor group of IIA & IIB suitable for operating voltage range of 150V to 265V with a reputed driver, certified by CIMFR, ISI marked complete as specified. Make: Crompton Greaves Cat No FWL1315-60-CDL or Techno commercially equivalent in Shyaam/Baliga/ Sudhir

S&F in repairs, suspension mounting 36W LED luminaire with primary suspension kit and main cable, high brightness SMD LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No LICONLP36WLED840SPCGRY with LICONSUSKITWITHMAINSCABLE or Techno commercially equivalent in Philips/Wipro

S&F in repairs, clean room, bottom opening 2x2, 42watt LED recess mounting luminaire suitable for Armstrong/Grid ceiling with mild steel powder coated housing with high quality polycarbonate opal diffuser, IP65 and high efficiency long life LEDs as light source, powdered by isolated SELV output electronic driver complete with all accessories complete all as specified. Make: Havells Cat No BOCR2X2R42WLED857SPC MSEXE or techno commercially equivalent of Phillips / Wipro

S&F in repairs, LED Highbay not less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers/Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories complete all as specified. Make: Havells CAT No. SAUCERGENXPROHBP120WLED 757P60DBOLTG or Philips CAT No BY 515P LED 1505 5700 NB PSU GR or Techno commercially equivalent in Wipro.

Note: 1. Rate quoted shall be deemed to include the cost of necessary hydraulic ladder or aerial access platform mounted on vehicle for fixing the light fittings.

Note for item No 15 to 20 23 to 29 Contractor shall produce LM-79 and LM-80 certificate for the luminaires supplied by OEM and genuinity of purchase from manufacturer before claiming any payment. BIS R No. is mandatory for LED light fixtures/drivers. LED fixture and driver should be of the same manufacturer.

S&F in repairs, 3pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 03 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 4 pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 13 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 3pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 46 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 4pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 56 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 3pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4202 08 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 4pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4202 18 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 4pole 400Amp MCCB, 36KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4220 07 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 4pole 630Amp MCCB, 50KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4220 09 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, MCB, SPN, 40 to 63Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 to 4086 20 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, MCB, SP, 6 to 32Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / L&T / Schneider/Havells as approved by GE

S&F in repairs, Isolator TP, 40Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4065 10 or equivalent in Siemens / L&T / Schneider/Havells as approved by GE

S&F in repairs, Isolator TP, 63Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4065 11 or equivalent in Siemens / L&T / Schneider/Havells as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 4Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 12Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed. Make for item No 42 to 44: Legrand/L&T/ Siemens/ Schneider/Havells as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 8Way, with 100Amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed. Make: Legrand CAT No 5076 11 or equivalent in L&T/ Siemens/ Schneider/Havells as approved by GE

S&F repairs, CRCA sheet metal enclosure with metal clad plug and socket single phase with a two pin and earth plug & socket suitable for surface/flush mounting, 240V, 20Amp capacity controlled by and including one No 20Amp MCB SP 10KA complete all as specified and directed.

Taking down the existing ceiling fan of any make/ model and sweep for overhauling/servicing after disconnecting carefully cleaning and checking for unserviceable components, replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor flexible chord and shaft etc., including assembling after lubricating the movable components and installing in its original position connecting, testing complete all as directed.

All as per Item No 47 above but Pedestal Fan of any sweep .

All as per item No 47 above but for Exhaust fans and Air Circulator of any sweep and model from any height installed in workshops. Note for item No 47 to 49 Bearing, rubber bush/bolt, gunmetal bush, capacitor, flexible cord, shaft and rewinding shall be measured and paid separately under relevant items.

Supply only rubber bush/bolt/clamps suitable for ceiling fan of any make, model or sweep complete all as specified and directed

Supply only shaft suitable for ceiling fan or exhaust fan or pedestal fan or wall mounted fan or air circulator of any make, model or sweep with necessary machining work complete all as directed.

Rewinding ceiling fans of 1200/1400mm sweep of any make, model including removal of existing burnt windings carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enameled copper conductor of same gauge and similar number of turns as that of existing and connecting the windings, applying insulating varnish and drying the windings thoroughly complete all as directed.

All as per item No 52 above but for Exhaust fan of 230/ 300mm sweep, Pedestal/wall mounted fan of 400mm sweep

All as per item No 52 above but for Exhaust fan of 450mm sweep or Air circulator of 450/600mm sweep.

Supply only ball bearing suitable for ceiling fan/wall mounting fan/pedestal fans of any sweep, make or model complete all as specified. Make: SKF/NBC/TATA/USHA

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan/pedestal fans/exhaust fan of any make, model or sweep complete all as directed.

Supply only down rod for ceiling fan as per site requirement complete all as directed.

M&L, painting of ceiling fan complete in situ or after carrying out repairs with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust complete all as directed.

Supply only twin core 0.5Sqmm PVC insulated, FR PVC round sheathed, flexible copper conductor cable, 1100Volts ISI marked complete all as specified.

Taking down the storage type electric heater (Geyser) of storage capacity 25/50 litres from its mounting by removing all water and electric connection and disassembling and carrying out the following at different locations:-

Descaling, cleaning the inner tank thoroughly

Examining the water tightness of storage tank after cleaning.

Examining the physical condition of thermostat, base assembly, fusible plug and outer tank for its serviceability.

Checking the dead weight type high pressure release valve, cleaning the seat and ensuring vent hole properly for any blockage etc.,

Inspection of pilot lamps

Reassembling the Geyser parts, checking all electrical system, ensuring there is no current leakage including testing.

Re fixing the Geyser, making elecrical and water connections, checking functioning of water inlet and outlet valves connected with geyser.

Supply only Heating element for storage type electric heater (Geyser) of 1.5/2 KW rating triangular/circular as required at site including rubber washers of any make and type complete all as directed.

Supply only rubber/PVC gasket for storage type electric heater (Geyser) of capacity 25/50litres capacity all as specified and as directed.

Supply only Indicator lamp for Geyser of suitable size all as per requirement at site complete all as directed.

Supply only Thermostat for the Geysers of the 25/50 litres capacity complete all as directed.

S&F in repairs, Insulating material (glass wool) for Geyser of capacity 25/50litres of any type or make complete all as directed.

S&F in repairs, 450mm long PVC connection, superior quality with two brass adopters suitable for 15mm dia pipe and fixing in position complete all as specified and as directed.

M&L, cleaning/scrapping of old body paint/dust and spray painting geysers of capacity 25/50 litres at site/stores with two coats of synthetic enamel paint complete all as directed.

Supply and replacement of outer cover of Geysers of capacity 25/50 litres to match with existing complete all as directed

S&F in repairs, Plug top, 16Amp, 240 Volts, complete all as directed. Make: Anchor, Bajaj, Crompton Greaves

S.S.ENGINEERING CORPORATION

CHITRA ENGINEERING CORPORATION

SUN LIGHT HOUSE

UNITY ENGINEERING TRADERS

SHANTI MARKETING AND SERVICES

M/S SRIDEVI ENTERPRISES

Maruthi international

SHRI GANESH ENTERPRISES