Loading
Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹4,950
Closing Date
5 Oct 2026, 11:00 am
Executive Engineer
Jal Shakti Division Jubbal Tehsil Jubbal Distt. Shimla HP
Restoration of rain damages of FIS Kuddu in G.P Kuddu in Tehsil Jubbal Distt. Shimla HP SH Laying Jointing of GI Pipes and butt Welding of various dia pipes
2026_HPIPH_144239_10
JBL-SML-09-718
Open Tender
Pipe Laying Works
Item Rate
30 days
Saraswatinagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹350
₹4,950
24 Sept 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. | 152.4 | Cum. | 592.3 | ₹90,266.52 |
| 2Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). | |||||
| 2.01 | 80 mm dia. | 340 | Rmt. | 97.92 | ₹33,292.8 |
| 3Butt welding as per revant BIS specification (leak proof including cost of Carriage of welding sets, bends tail pieces, tees reducers increasers etc. as per site requirement and as per directio of the Engineer-in-charge, earth work in trencher to be measured and paid for separately i/c all leads lifts and carriage of materials at site. (Already laid pipes) | |||||
| 3.01 | 80 mm dia. | 90 | Joint. | 858.95 | ₹77,305.5 |
| 3.02 | 65 mm dia. | 40 | Joint. | 735.97 | ₹29,438.8 |
| 3.03 | 50 mm dia. | 26 | Joint. | 582.96 | ₹15,156.96 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
f6.pdf
Tender Documents • 0.15 MB
f8.pdf
Tender Documents • 0.70 MB
tc.pdf
Tender Documents • 0.22 MB
BOQ_214559.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .