PROVISION OF CRICKET PRACTICE PITCH AT CG ENCLAVE CHICOLNA AND PROVISION OF KOTA STONE IN WAREHOUSE NO 01 AT CGASD GOA UNDER GE(I)(CG) GOA

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out. Complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and 1.5 m deep in soft/ disintegrated rock and getting out. Complete all as specified and directed.

Exavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/disintegrated soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft and disintegrated soil. Complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick for soft/ disintegrated rock. Complete all as specified and directed.

Removing excavated meterial exc 250 m and n exc 500m and depositing where directed at a level n exc 1.5 m above starting point . Complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 30 cm thick, spread, levelled and rammed including watering. Complete all as specified and directed.

M&L for 150 mm thick (compacted thickness) WBM with coarse aggregate from granite or basalt having grading 2 (63 to Cum 12. 40mm size) or of grading 3 (50 to 20mm size) spread rolled and consolidated to gradient and camber required using 8 to 12 Ton power roller. Complete all as specified and directed.

Material and labour for hardcore using broken stone/boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 30 cm thick, watered and rammed to a true surface complete as specified

Rolling and consolidation on formation surface using power roller capacity exceeding 8 to 10 tones. Complete all as specified and directed.

M&L for post holes, any thickness, size or shape (including caps and bases) using Cement concrete type C2, 1:3:6 (40 mm graded stone aggregate). Complete all as specified and directed.

S&F of MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat Kg iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. Complete all as specified and directed.

S&F for Mild steel screw bolts diameter of neck 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long. Complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described with two coats of sythetic enamel paint over a coat of red oxide primer. Complete all as specified and directed.

Provision of Synthetic/Nylon net having mesh size not less than 10mm x 10mm and a minimum thickness of 3mm, water proof and corrossion resistant light weight to cover the sides all complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate. Complete all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm screed bed in CM (1:4). Complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement rendering of 10mm in CM (1:6). Complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the surfaces complete all as specified and directed

Material and labour for preparation of old treated plastered surfaces of wall by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M/s Gayatri Contruction Co. (BID ID -3102812)

SLB Enterprises (BID ID -3105140)

M/S jvsr constructions (BID ID -3098038)

NS Enterprises (BID ID -3122637)

SHIVANI ENTERPRISES (BID ID -3101866)

rana construtions (BID ID -3104707)

AURA ENTERPRISES (BID ID -3106030)