Providing irrigation facilities to scheduled tribe beneficiaries in Karkala constituency of Udupi district- TSP Package-02

WORK DONE CERTIFICATE

Name of the Department

Name of Division

1 Name of work :

2 Estimated Cost :

3 Agreement No. :

4 Name of Contractor :

5 Tendered cost :

6 Date of work order :

7 Stipulated period of completion :

8 Intended date of Complition :

9 Final Date of completion, (For completed work) :

10 Revised amount of work (including claims/extra/arbitration amount,if any) :

11 Cost of work executed :

12 Balance cost of work :

13 Whether final bill is paid :

14 Reasons for non completion of work in schedule period of completion :

15 Whether any penalties fine/stop notice/compensation/liquidated damage imposed/Imposed & canceled :

a) Earth Excavation :

b) Embankment :

c) Providing & laying M-15 :

d) Providing & laying M-10 :

f) Rubber & Earth Filling :

g) Providing & laying M-20

16 Remarks of the Engineer performance of the Contractor working style quality consciousness tendency of claims :

Divisional Officer

Sub-work : - Estimate for Providing Electrical works to Supplying, installing, Testing & Commissioning of 3 Phase Sub mersible pumpset to

Sl. No. Description of work Unit Rate Qty. Amount

1 ) Supplying, fixing and wiring 0 to 600 Volts 96x96mm AC Voltmeter on existing panel / wood board.

PWD Electrical C.S.R. Page No.38 Item No 16 No. 430.00

Add: Area Weightage @ 5% 21.50

2 ) Supplying, fixing and wiring 0 to 100amps Direct Reading AC analog type Ammeter

PWD Electrical C.S.R. Page No.39 Item No 20 No. 590.00

Add: Area Weightage @ 5% 29.50

3 ) Supplying, fixing and wiring rotary selector switch suitable of Voltmeter

PWD Electrical C.S.R. Page No.39, Item No..22 No. 245.00

Add: Area Weightage @ 5% 12.25

4 ) Supplying, fixing and wiring rotary selector switch suitable for Ammeter

PWD Electrical C.S.R. Page No.39, Item No..21 No. 430.00

Add: Area Weightage @ 5% 21.50

5 ) Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50Hz 12/24v D.C.

PWD Electrical C.S.R. Page No.40 Item No. 34(b) No. 355.00

Add: Area Weightage @ 5% 17.75

6 ) Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtr long buried in a pit.. The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection form the pipe to the conduit etc, is to be established through GI wire of size as oer ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, pipe shall have 16 through holes of 12 mm dia.

PWD Electrical C.S.R. Page No..68, Item No.1 No. 1950.00

Add: Area Weightage @ 5% 97.50

7 ) Supplyingand running 8 SWG Copper conductor for grounding and (along with other wires in condit system of wiring ) using necessary suitable size clamps, nails, guttas/spacers etc.,

PWD Electrical C.S.R. Page No. 75, Item No. 23 II ( c) Mtr. 85.50

Add: Area Weightage @ 5% 4.28

8 ) Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrossion treated sheet steel or iron clad closure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/ single phase motor. Group 'B'

PWD Electrical C.S.R. Page No. 14, Item No. 7 ( b) No. 1377.00

Add: Area Weightage @ 5% 68.85

9 ) Supplying of TPST with rewirable porcelain channels in SM enclosure. 32Amps Group 'B'

PWD Electrical C.S.R. Page No. 32, Item No. a (2) No. 1360.00

Add: Area Weightage @ 5% 68.00

10 ) Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc.20"x20"x2.5"

PWD Electrical C.S.R. Page No. 32, Item No. 2 ( f) No. 285.00

Add: Area Weightage @ 5% 14.25

11 ) Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps

PWD Electrical C.S.R. Page No. 32, Item No. 3 ( b) No. 100.00

Add: Area Weightage @ 5% 5.00

12 ) Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 5-32 Amps TPN Group 'B'

PWD Electrical C.S.R. Page No. 37, Item No. 13 E ( 2) No. 720.00

Add: Area Weightage @ 5% 36.00

13 ) Supplying , fixing and wiring Earth Leakage Miniature Circuit Breaker [ ELMCB ] 240/450V up to 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole

PWD Electrical C.S.R. Page No. 38, Item No. 14 (c) No. 2465.00

Add: Area Weightage @ 5% 123.25

14 ) Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery. Cost per KVAR Group 'B'

PWD Electrical C.S.R. Page No. 40, Item No. 33 (b) No. 255.00

Add: Area Weightage @ 5% 12.75

15 ) Fixing of. 15A to 63 Amps TPST along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling.

PWD Electrical C.S.R. Page No. 30, Item No.16 (a) No. 165.00

Add: Area Weightage @ 5% 8.25

16 ) Fixing a shunt capacitor of up to 5 KVAR capacity with necessary clamps, bolts, and nuts to an existing wooden or metal board including banking of more than one capacitor.

PWD Electrical C.S.R. Page No. 30, Item No.15 (a) No. 120.00

Add: Area Weightage @ 5% 6.00

17 ) Wiring for power circuit using one of PVC insulated 1100v grade, multis and Copper conductor single core cable in open or concealed system of wiring.4 sqmm

PWD Electrical C.S.R. Page No.9,10, Item No..20 II(d) Mtr. 30.00

Add: Area Weightage @ 5% 1.50

18 ) Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/ steel tap armoured cable with PVC outer sheathing 1.1KV class 4 core 16 sqmm Class 'B' PVC Cable

PWD Electrical C.S.R. Page No.69 Item No 4 (II) d Rmtr 145.00

Add: Area Weightage @ 5% 7.25

19 ) Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe/ stoneware pipe / on wall/ on pole as required. In existing trench/duct.- 6 sqmm to 16 sqmm

PWD Electrical C.S.R. Page No.69 Item No 5 (I) a Rmtr 8.00

Add: Area Weightage @ 5% 0.40

20 ) Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete(As per Civil SR KSBB I-2, P-7) In soil (Hard)

PWD Electrical C.S.R. Page No.70 Item No 6 (b) Rmtr 50.00

Add: Area Weightage @ 5% 2.50

21 ) Supplying and fixing of class A (medium duty) 50mm GI pipe of wall thickness not less than 3.25mm on pole/ wall/ drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class.

PWD Electrical C.S.R. Page No.70 Item No 9 (b) Rmtr 260.00

Add: Area Weightage @ 5% 13.00

22 ) Supply and laying double walled corrugated ( DWC) HDPE Pipe with necessary connecting Sockets/ Coupling /Tees/Bends of same materials in existing trench as per IS 14930 part -II suitable for drawing under ground cables. through 77 mm OD/63 mm ID

PWD Electrical C.S.R. Page No.73,, Item No..19 (d) Rmtr 150.00

Add: Area Weightage @ 5% 7.50

23 ) Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (Metal only) 25mm dia

PWD Electrical C.S.R. Page No.70,71, Item No..11(b) No. 66.00

Add: Area Weightage @ 5% 3.30

24 ) Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP capacities.

PWD Electrical C.S.R. Page No.14,, Item No..9 No. 735.00

Add: Area Weightage @ 5% 36.75

25 ) Energy Meter box. Supply and Installation /Fixing / Provision of Outdoor type Thermoplastic Modular panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather proof) rust proof, dust proof, water proof, corrosion proof having internally embedded gasket on both lid and flap suitable to fix. Single phase/ three phase energy meter in suitable base plate and having a provision for Fuse/ MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 X 600 X 170mm

PWD Electrical C.S.R. Page No.42,, Item No..40 (c) No. 4765.00

Add: Area Weightage @ 5% 238.25

26 ) Providing and fixing in trenches galvanised / mild steel tubes (medium grade) 15mm dia nominal bore with all fittings ( earth work in trenches to be measured and paid for separately ) including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. 50mm dia nominal bore

PWD Civil C.S.R. P.No. 79 Item No 13.15 Rmtr. 308.00

Add: Area Weightage @ 10% 30.80

27 ) Providing and fixing in position 25mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications 50mm nominal bore

PWD Civil C.S.R. P.No. 82 Item No 13.55 No. 1050.00

Add: Area Weightage @ 10% 105.00

28 ) Making connection of G.I distribution branch with G.I main of 50 to 85mm. and 100 to 150 nominal bore, including cutting and threading the pipes, providing and fixing Tee, nuts, labour for all item of works, testing and HOM of equipments complete as per specifications.

PWD Civil C.S.R. P.No. 80 Item No 13.21 No. 529.00

Add: Area Weightage @ 10% 52.90

For submersible pump set

29 ) Supplying and drawing 2.5 Sqmm of 36 strands 0.3mm dia 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and sheathed suitable for working Voltage upto 1100 Volts Group 'B'.

PWD Electrical C.S.R. P.No. 49 Item No 29 b (2) Rmtr. 68.00

Add: Area Weightage @ 10% 6.80

30) Supplying transportation and errection of cement Concood box type pump house of size 132cmX56cmX28cm with two RCC supports of size 30cmX4cmX135cm. The supports shall be errected in (1:2:4) cement concret work including excavation and refilling (RDED SE Mangalore circle Rate Approved letter No ÊÐÖ.…/»Ð.¤Ñ¢ý … ÀÐØ /ÀÐԁ /Š…-1 /·Ð¤Ð»Ð«å /2007-08 4194 ¸¹Ñ‘Ð 07/03/2008) No 5900.00 1 5900.00 0.05

31) Pressure Gauge : Providing brand new Best make pressure gauge bourdon type, 63 mm conforming to IS 3624 -1987 with latest amendments with ISI mark 65 mm dia.

32) KSRB 13-6.2-2 : Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end ) 50 mm nominal bore including cost of all materials labour charges, HOM of equipment and testing complete as per specifications

Add: Area Weightage @ 10% 149.85

33) Non Return Valve : Supply and delivery of brand new Best make non return valve of size 65 mm conforming to IS 10805 -1986 with latest amendments with ISI mark 50 mm dia

34) Galvanized Mild Steel Tube : Providing galvanized mild steel tubes heavy class (c class) conforming to IS : 239 part 1 - 1979 with latest amendments with ISI mark one end fitted with protective cover of size 50 mm. Dia

35) M.S heavy collar : Providing galvanized mild steel collar heavy class (c class) conforming to IS of size 50 mm. Dia

36) Erection, Electrification and Commissioning works of Pumpsets

(PRE Cicle, Mangalore, 2010-11, SR Page No. 2 , Item No.11 :Zone-II) Job Work 4290.00 1 4290.00

37) Supplying, installing, testing & commissioning of 3 phase submersible pumpset L/S 50000.00

Total Rs 121201.00

Asst. Engineer Asst. Exe. Engineer.

S.E.P. Sub division,

Estimate for Providing & Erecting Pumping Machinery to Openwell

Sl. No. Item of Work Unit Qty Rate Amount

1 Submersible Cables :PVC 1x3x4.00 Sqmm ( Item no2.3 page 117) RM 25 105.60 2640.00

2 Non Return Valve :Supply and delivery of a brand new best make non return valve of size 50mm conforming to IS 10805-1986 with latest amendment and ISI mark 50 mm dia ( Item no5 page 118) Each 1 850.00 850.00

3 Galvanized Mild Steel Tubes :Providing galvanized mild steel tubes heavy clean (C-class) conforming to IS:219 Part/1979 with latest amendments with ISI mark (one end fitted with preservative cover of size 50mm ( Item no10 page 118) RM 5 519.30 2597.00

4 INDOOR TYPE BOARD : Consists of two units Meter Board unit and Panel Board Unit Up to 6.00 HP ( Item no 6.1 page 118) Each 1 7850.00 7850.00

5 Erection of Panel Board Indoor type ( Item no 12.2 page 118) Each 1 850.00 850.00

6 Erection, Electrification and commissioning works of pump set ( Item no 11 page 118) Each 1 4500.00 4500.00

7 Supplying transportation and errection of cement Concood box type pump house of size 132cmX56cmX28cm with two supports of size 30cmX4cmX153cms made of fabricated steel structure of 4mm MS wires welded together coupled with chicken mesh and provided with edge stiffeners in the form of MS flats of size 20mm x 3mm with 6mm aggregates, having thin (less than 1inch) sections in general and all surfaces are painted with two coats of antifungus paint of approved appropriate colour and shade including excavation embedding into cement concrete of mix M20 proportion of size 60cms X 30cms x 45cms and refilling the excavated stuff with all lead and lift, loading and unloading etc., complete and as per the directions of the engineer incharge of work.( Item no 1 page 106) Each 1 11642.40 11642.00

8 Supply and delivery of HDPE pipes grade PE 80 OD 50mm( Item no3-3 page 116 ) RM 30 175.00 5250.00

9 Providing submersible pump set suitable for Open well of 15mm dia and having the declared duty conditioned as detailed below and satisfying performance characterstick for pump and motor as declared by the bureau of Indian standards. The pump set should conform to IS 0034-1976(with all its latest amendments) and should bear ISI certification mark IS: 8034-1989. The Pump set should consist of bronze impellers only. Capable of Discharging 120 LPM of duty point against a total head 65m due to all charges 3.00H.P/50m Dish ( PRED SR Comparitive Statement)Pg no:116,I.No:03 3HP 1 25826.08 25826.00

Basic Rate 23059.00

Area weightage @ 12% 2767.08

Total Rs. 62005.00

Assistant Engineer Assistant Executive Engineer

M.I. & G.W.D. Sub Division, Udupi

ESTIMATE FOR INTERNAL WIRING AND ELECTRIFICATION

Sl.No Item Of Work Unit Quantity Rate Amount

1 Open Conduit system : Supplying heavy gauge PVC conduit pipe ….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick wall and cement plastering damaged portion using heavy gauge saddles at an interval of 700 mm using WF screws. 19/20mm dia 2mm thick (P2 item 1 a) Of PWD Electricals) Mtr 3.00 38.85 116.00

2 Point wiring using copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand 2*1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exisisting plastic sheet/ gang box, the othe ind of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Short point upto 3mtr form tapping point to out let via switch (P3 item 8(I) a Of PWD Electricals) Points 3.00 183.75 551.00

3 Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps Group 'A' ( P13 item 2 a Of PWD Electricals)) Each 1 58.80 59.00

4 Supplying and fixing cast aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 60/100 watts 230v GLS lamp as required. © Other Approved Make) Ele SR page 13/5 c Each 1 229.95 229.00

5 Supplying and fixing of backlite D.P/ Socket/ switch with/ without neon indicator over existing wood board or flush mounting in plastic plates/nitches. Using Group B Material. (a) 32 Amps Flush/Projected Type DP Switch. Ele SR page 6/14 II (a) Each 1 128.10 128.00

6 Supplying, fixing and wiring earth electrode for ground conduits, IO cutouts and other equipments on the meter board using 40 mm. Dia.2.90 mm. Thick GI pipe 2.5 M long burries in a pit. The pit should be filled with equal proportion salt and charcoal 150 mm.alround the pipe to the conduit etc.is to established through GI wire of size as per clause 7.3.3 of IS 732 using 12 mm.dia. bolts, nuts,washers and checknuts etc. The pipe shall have 16 through holes of 12. mm.dia . Ele SR page 68/1 Each 2 2047.50 4095.00

7 Supplying and fixing one of 32A. Porciline Fuse channels with cutouts on existing wooden/panel board using necessary nuts bolts and washers etc, complete. Ele SR page 32/3(b) Each 3 105.00 315.00

8 Supplying and fixing angle iron frame work fabricated out of M.S. angle 40 x 40 x 6 mm. With bolts, nuts, washers etc, and painted with 2 coats of red oxide and then two coats of appd. Paint. Ele. SR page 41/38 (a). RM 3.00 252.00 756.00

9 Supplying of TPST 32 amps with rewirable porcelain channels in SM enclosure. Page 30/1(a) Group B Each 1 1417.52 1418.00

10 Fixing of. Amps TPST/ change over switch/ Contractor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling. 15A to 63A TPST (P30 item 16 a) Each 1 173.25 173.00

11 Supplying and fixing 5 to 32A. TPN miniature circuit braker on existing MCB Distribution boards using necessary fixing materials and wiring complete as required. P 35/13(e-2) Group A Each 1 1055.25 1055.00

12 Supplying fixing and wiring current operated earth /residual current circuit breaker 240/450 V with 6 kA short circuit withstanding capacity upto 100-300 mA sensitivity on existing wood/panel board 40 Amps 4 Pole. Page 38/14 c Each 1 2588.25 2588.00

13 Supplying and fixing of LED type panel Board indicating lamp with required color suitable for 220 v A.C.50 Hz 12/24 v DC Group B page 40/34(b) Each 3 372.75 1118.00

14 Supplying and fixing 500 x 500 x 65 mm. (20" x 20" x 2.5") polished wood board made of not less than 15 mm. Thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs, screws, etc. P 32/2 f Each 1 299.25 299.00

15 Supplying, fixing and wiring electronic 5 to 40 Amps three phase 4 wire Energy meter Group B page 37/27(b) Each 1 3296.25 3296.00

16 Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/ steel tap armoured cable with PVC outer sheathing 1.1KV class 4 core 16 sqmm Class 'B' PVC Cable. PWD Electrical C.S.R. Page No.69 Item No 4 (II) d RM 60 152.25 9135.00

17 Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe/ stoneware pipe / on wall/ on pole as required. In existing trench/duct.- 6 sqmm to 16 sqmm, PWD Electrical C.S.R. Page No.69 Item No 5 (I) a RM 60 8.40 504.00

18 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete(As per Civil SR KSBB I-2, P-7) In soil (Hard)PWD Electrical C.S.R. Page No.70 Item No 6 (b) RM 60 52.50 3150.00

19 Supplying and fixing of class A (medium duty) 50mm GI pipe of wall thickness not less than 3.25mm on pole/ wall/ drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class.PWD Electrical C.S.R. Page No.70 Item No 9 (b) RM 7 273.00 1911.00

20 Supply and laying double walled corrugated ( DWC) HDPE Pipe with necessary connecting Sockets/ Coupling /Tees/Bends of same materials in existing trench as per IS 14930 part -II suitable for drawing under ground cables. through 77 mm OD/63 mm IDPWD Electrical C.S.R. Page No.73,, Item No..19 (d) RM 60 157.50 9450.00

21 Miscellaneous Expenses 0.00

Total Rs. 40346.00

Assistant Engineer Assistant Executive Engineer

M.I. & G.W.D. Sub Division, Udupi

Sl. No. Material Source Lead distance in Km. Lead charges Lead charges from Km. 5 to 30 (in Rs.) Lead charges beyond 30Km Total lead charges Deduction of lead charges upto 1 Km. Loading & unloading charges in Rs. Total charges

For items with initial lead 1Km For items with initial lead 50m Unit

1 Rubble Udupi 25.00 9.20 20.0 x 8.70 = 174.00 0.0 x 7.00 = 0.00 183.20 67.30 124.65 115.90 307.85 /cum Cum Cum tonne Cum 1000 lts Cum Cum tonne Cum 1000 lts

6 Lead more than 5 Km upto 30Km 8.60 8.70 5.40 12.80 5.40

Section Officer, Asst. Executive Engineer, Executive Engineer,

M.I & G.W.D. Sub-Dn, Udupi M.I. & G.W.D. Division, Manglore

Present Market Rate Basic Rate Units Difference

Cement 375.00 300.00 Bag 75.00

Bituminious Emulsion Cum

L e a d S t a t e m e n t

1 Cement, Steel, Granite & Sand : Udupi tq HQ

From Udupi To Barkur = 18.00 Km

Barkur to Work spot 6.50 Km

Consider 25.00 Km

4 Earth : 5.00 Km

C e r t i f i c a t e :-

1. Certified that for materials - Cement, steel, granite & sand in consideredlead from taluk head quarters which is 25.00 Kms.

Asst Executive Engineer, Executive Engineer,

M.I. & G.W.D. Sub-Dvn, Udupi M.I.&G.W.D. Division, Mangalore

Superintending Engineer,

Minor Irrigation Circle, Mysore

Sub Estimate for Rising main & Distribution

Sl. No Item No Length Breadth Depth Total Quantity Rate Amount

1 Excavation in all kinds of soils including boulders up to 0.6m dia meter (0.113 cum) and placing excavated stuff neatly in specified dump area or disposing off the same as directed etc. complete with lead up to 50 mtrs and initial lead up to 1.50mtrs For Pipe line trenches, anchor block, trust blcok, saddles and other similar structures( M.I. Cicle, Mysore SR, 2014-15, SR Page No. 94, Item No.1b)

Basic Rate 162.00 /Cum

Add for Area weightage @ 3% 4.86

Distribution 1 640.00 0.60 0.60 230.40

2 Providing and installing at site of work PVC pipe including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges, handling charges with an initial lead of 5 kms including encasing the pipe alround to a depth not less 15cms with gravel or selected earth available from the excavation etc. (PRE Circle, Mangalore RWS SR 2012-13 Item No. 3.4.2a Page No. viii)

3 Refilling Pipe line trenches with available soil obtained from excavation of trenches in layers of 150mm thickness and compacting the same to required degree of compaction etc. complete with lead up to 50 mtrs (M.I. Cicle, Mysore SR, 2014-15, SR Page No. 103, Item No.31)

Basic Rate 141.00 /Cum

Add for Area weightage @ 3% 4.23

Soil obtained from excavation = 255.60

4 Laying and jointing G.I. Pipes without earthwork includng aligning to line and slope, fixing collers, elbows, elbows, tees, bends, gland cocks and other fitting with cuts and threads wherever (PRE Circle, Mangalore RWS SR 2012-13 Item No. 3.1.6 Page No. 29)

5 KSRB 13-6.2-2 : Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end ) 50 mm nominal bore including cost of all materials labour charges, HOM of equipment and testing complete as per specifications (PWD SR 2013-14, P-98 I.No.13.37)

Basic Rate 1990.00 /Each

Add for Area weightage @ 10% 199.00

6 Cost of 80 mm dia G.I. pipe (PRE Circle, Mangalore RWS SR 2012-13 Item No. 6 Page No. 111)

Estimate for Construction of Cistrern ( 1 No.) No 1

7 KSRB 2-2.2 :Earth work excavation for foundation of buildings, water supply, sanitory lines and electrical conducts either in pits or in trenches 1.50M and above in width in hard soil not exceeding 1.50M in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50M after breaking of clods complete as per specifications.Specification No. KBS 2.1(b) / 2.3.5

8 KSRB 4-1.2 :Providing and laying in position plain cement concrete of mix M10 with OPC cement @220kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.892 cum and fine aggregates @ 0.465 cum, machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.Specification No. KBS 4-1, 4.2

9 KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13

9 Providing and constructing laterite size stone masonry including cost and conveyance of materials curing etc complete as per specification FOR BASEMENT in C.M. 1:6 (Cement = 45 Kg.)

10 KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix M15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2

11 KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Inside 4 2.00 1.50 12.00 Sqm

Outside 4 3.00 1.50 18.00 Sqm

Basement 4 3.00 0.45 5.40 Sqm

12 Miscellaneous & unforseen such as controlling arrangements etc.

Assistant Engineer Assistant Executive Engineer

M.I Sub Division

Construction of Cistern ( Size:2.00Mt X 2.00 Mtr )

( Basic rate for Cement as per Item 132 Page V of SR of PWD Circle, Mangalore for the year for the year 2013-14) is Rs. 696.00/Qtl. ie., Rs, 348.00/Bags)

Sl. No. Description Unit Rate/Unit Cement M Rate S R rate

1 KSRB 2-2.2 :Earth work excavation for foundation of buildings, water supply, sanitory lines and electrical conducts either in pits or in trenches 1.50M and above in width in hard soil not exceeding 1.50M in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50M after breaking of clods complete as per specifications.Specification No. KBS 2.1(b) / 2.3.5

(Basic rate as per item 2.4 Page 5 of P.W.D. SR Mangalore Circle 2014-15) Cum Rs. 245.00

Add for Malnad Area weightage @ 10% 24.50

2 KSRB 4-1.2 :Providing and laying in position plain cement concrete of mix M10 with OPC cement @220kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.892 cum and fine aggregates @ 0.465 cum, machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.Specification No. KBS 4-1, 4.2

(Basic rate as per item 4.2 Page 12of P.W.D. SR Mangalore Circle 2014-15) Cum Rs. 5408.00

Difference in Cost of cement(4.4 Bag/cum x ( Rs 375 /bag -Rs.379.15 / bag) Rs. -18.26 4.4

Add for Malnad Area weightage @ 10% 538.97

3 KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13

(Basic rate as per item 5.6 Page 23 of P.W.D. SR Mangalore Circle 2014-15) Cum Rs. 4286.00

Difference in Cost of cement(1.4 Bag/cum x ( Rs 375 /bag -Rs.379.15 / bag) Rs. -5.81 1.4

Add for Malnad Area weightage @ 10% 428.02

3 Providing and constructing laterite size stone masonry including cost and conveyance of materials curing etc complete as per specification FOR BASEMENT in C.M. 1:6 (Cement = 45 Kg.)

(Basic rate as per item 37.64.1 Page 275 of P.W.D. SR of Mangalore Circle 2014-15) Cum Rs. 4284.00

Difference in Cost of cement(0.9 Bag/cum x ( Rs 375 /bag -Rs.379.15 / bag) Rs. -3.73 0.9

Add for Malnad Area weightage @ 10% 428.03

4 KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix M15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2

(Basic rate as per item 4.6 Page 12 of P.W.D. SR Mangalore Circle 2014-15) Cum Rs. 5702.00

Difference in Cost of cement(4.8 Bag/cum x ( Rs 375 /bag -Rs.379.15 / bag) Rs. -19.92 4.8

Add for Malnad Area weightage @ 10% 568.21

5 KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

(Basic rate as per item15.18 Page 123 of P.W.D.SR Mangalore Circle 2014-15) Sqm Rs. 208.50

Difference in Cost of cement(0.22 Bag/cum x ( Rs 375 /bag -Rs.379.15 / bag) Rs. -0.91 0.22

Add for Malnad Area weightage @ 10% 20.76

Assistant Engineer Assistant Executive Engineer

SEP Sub Division

ಕಾರ್ಕಳ ವಿಧಾನಸಭಾ ಕ್ಷೇತ್ರದ ಗಿರಿಜನ ಉಪಯೋಜನೆ ಪ್ಯಾಕೇಜ್-02

ಕ್ರಮ ಸಂಖ್ಯೆ ಜಿಲ್ಲೆ ತಾಲ್ಲೂಕು ಕಾಮಗಾರಿಯ ಹೆಸರು ತಾಂತ್ರಿಕ ಮಂಜೂರಾತಿ ಸಂಖ್ಯೆ/ ಆಡಳಿತಾತ್ಮಕ ಅನುಮೋದನೆ ಸಂಖ್ಯೆ ಅಂದಾಜು ಮೊತ್ತ ಲಕ್ಷಗಳಲ್ಲಿ ಷರಾ

1 ಉಡುಪಿ ಹೆಬ್ರಿ ಹೆಬ್ರಿ ತಾಲ್ಲೂಕು ಅಂಡಾರು ಗ್ರಾಮದ ಶಾರದಾ ಕೋಂ ಗೋವಿಂದಗೌಡ ಪೈತಾಳ ಇವರ ಜಮೀನಿನಲ್ಲಿ ಕೊಳವೆ ಬಾವಿ ಕೊರೆದು ನೀರಾವರಿ ಸೌಲಭ್ಯ ಕಲ್ಪಿಸುವ ಕಾಮಗಾರಿ S.D.E.R. No: 08/2026-27 5.00 Borewell

2 ಉಡುಪಿ ಕಾರ್ಕಳ ಹೆಬ್ರಿ ತಾಲ್ಲೂಕು ಅಂಡಾರು ಗ್ರಾಮದ ಮಹಾಬಲ ಗೌಡ ಬಿನ್ ಕೂಕ್ರಗೌಡ ಪೆತಾಳ ದರ್ಖಾಸು ಮನೆ ಇವರ ಜಮೀನಿನಲ್ಲಿ ಕೊಳವೆ ಬಾವಿ ಕೊರೆದು ನೀರಾವರಿ ಸೌಲಭ್ಯ ಕಲ್ಪಿಸುವ ಕಾಮಗಾರಿ S.D.E.R. No: 11/2026-27 5.00 Borewell

ಕಾರ್ಕಳ ವಿಧಾನಸಭಾ ಕ್ಷೇತ್ರದ ಗಿರಿಜನ ಉಪಯೋಜನೆ ಪ್ಯಾಕೇಜ್-02

No. Item Name Unit Sharada c/o Govinda Gowda paithala in Andaru village Mahabala Gowda bin Kookra Gowda Paithala Darkasu house in Andaru village Quantity Rate Amount

Common SR 2023-24 Vol-5,Pg.No.140 Item No.12.4 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc., complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 5922.56 11845.12

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 0 to 50 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 50.00 50.00 100 414.40 41440.00

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 50 to 100 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 50.00 50.00 100 519.68 51968.00

Common SR 2023-24 Vol-5,Pg.No.139 Item No.12.1.3 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) -For Borewell depth of 100 to 150 Mtrs, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 50.00 50.00 100 552.16 55216.00

Common SR 2023-24 Vol-5,Pg.No.143 Item No.12.32 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 18.00 18.00 36 2164.96 77938.56

Common SR 2023-24 Vol-5,Pg.No.143 Item No.12.33 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 3 3 6 168.00 1008.00

Common SR 2023-24 Vol-5,Pg.No.143 Item No.12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. , complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 183.68 367.36

Common SR 2023-24 Vol-5,Pg.No.152 Item No.13.13.6 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete-For 5.00 HP - 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 35993.44 71986.88

Common SR 2023-24 Vol-5,Pg.No.155 Item No.13.27.1 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover)-50 mm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 24.00 24.50 49 3416.00 165676.00

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.22.3 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments-1x3x4 Sqm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 156.00 156.00 312 151.20 47174.40

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.25.1 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 1400.00 2800.00

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.32 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Job 1 1 2 7280.00 14560.00

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.5.1 Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14SWG powder coated paint of approved colour-32A, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 1701.00 3402.00

Common SR 2023-24 Vol-6, Pg.No.57 Item No.13.18.1 Fixing of 15A to 63A TPST /change over switch/Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 278.00 556.00

Common SR 2023-24 Vol-5,Pg.No.154 Item No.13.23.2 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete-For 3 to 6 HP pumps, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 10696.00 21392.00

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C., complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 515.00 1030.00

Common SR 2023-24 Vol-6, Pg.No.5 No.2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010-For 2.5 mm2, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 12.00 10.00 22 42.00 924.00

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.6.5 Supply and fixing polished woodboard made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws- For 15" x 12" x 2", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 201.00 402.00

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.6.6 Supply and fixing polished woodboard made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws- For 20" x 20" x 2.5", complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 326.13 652.26

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834. 3phase, 400/440V grade, for power factor improvement of rotating machineries like induction motor, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Kvar 3 3 6 480.00 2880.00

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.4.1 Fixing a shunt capacitor upto 5 kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 154.00 308.00

Common SR 2023-24 Vol-6, Pg.No.5 Item No.2.1.1 Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral) & 1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirming to IS-694:and latest amendments)with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box ,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.-Short point upto 3Mtr from tapping point to out let via switch, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Point 1 1 2 285.00 570.00

Common SR 2023-24 Vol-6, Pg.No.17 Item No.5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing material sand 'C' Type curve, indicatorON/OFF,energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898.-6-32 A SP, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 415.00 830.00

Common SR 2023-24 Vol-6, Pg.No.14 Item No.5.7.2 Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers-32 A, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 3 3 6 241.00 1446.00

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 5705.00 11410.00

Common SR 2023-24 Vol-6, Pg.No.19 Item No.5.20.8 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.-32-40A 4 pole, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Each 1 1 2 5147.00 10294.00

Common SR 2023-24 Vol-6, Pg.No.5 Item No.2.3.4 Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010-4 mm2, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 5.00 5.00 10 63.00 630.00

Common SR 2023-24 Vol-6, Pg.No.2 Item No.1.1.3 Supplying heavy gauge PVC conduit pipe 32 mm dia 2.5 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted woodplugs incase of RCC ceiling and RCC wall /stone structure or rawl plugs incase of brickwall sand cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 5.00 5.00 10 106.00 1060.00

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.35.1 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work.-2 x 10 sqmm, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 35.00 33.00 68 89.60 6092.80

Common SR 2023-24 Vol-1, Pg.No.6 Item No.1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.-In all kinds of soils. Depth upto 1.50m, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Cum 12.60 11.88 24 542.08 13270.12

Common SR 2023-24 Vol-1, Pg.No.7 Item No.1.10 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Cum 12.60 11.88 24 179.20 4386.82

Common SR 2023-24 Vol-5,Pg.No.127 Item No.11.2.5 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For: Medium Duty GI pipe of 40mm dia, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 35.00 33.00 68 546.56 37166.08

Common SR 2023-24 Vol-5,Pg.No.157 Item No.13.39 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Job 1 1 2 4200.00 8400.00

Common SR 2023-24 Vol-5,Pg.No.156 Item No.13.35.3 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. For 3.5 x 10, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 35.00 33.00 68 218.40 14851.20

Common SR 2023-24 Vol-5,Pg.No.155 Item No.13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets, complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 146.00 148.00 294 44.80 13171.20

Common SR 2023-24 Vol-6,Pg.No.20 Item No.5.42.1 Fabricating supplying and mounting MS box made out 14 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. Sq CM 12000.000 12000.000 24000 0.56 13440.00

Common SR 2023-24 Vol-6,Pg.No.20 Item No.5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm. Complete with all lead and lifts, loading and unloading charges as per the direction of Engineer in charge. m 5.00 5.00 10 341.60 3416.00

Total: 713960.79

Format for 3.2 (b)

SI.No Name of Work Estimated cost Tendered cost Cost of work executed Cost of work to be executed Date of agreement Stipulated period of completion Scheduled date of completion

Divisional Officer

Note:- The statement showing the value of existing commitments and On - Going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of an Executive Engineer or equivalent.