Special repair to bldg No T-8 at NRLC Line in RA at Central Amn Depot Pulgaon

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet one end crimpled bend 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based crimpled corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by EIC.

S&F in repair for Expanded metal, cut to length, bent to shape required not exc 4 Kg/sqm and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to concrete of plastered surface all as per specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for old painted Surfaces of any description, over 10cm in width or girth,not otherwise described two coats of synthetic enamel paint all as specified and as directed.

Material and labour for false ceiling with GI based steel snap grid frame work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with hangers 4mm dia GI wire adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long or hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 8/9 mm thick fixed to steel frame work including Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, including frame of any description and any thickness, fixed in any position . complete all as specified and directed by Engineer-in-Charge.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level.

M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement.complete

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes.

M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as item No (15) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .

M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as directed. ( Make Nirali /Prayag/Blue star/Silver Shine)

M&L for Granite (of any type) tiles 19-25mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm screed bed CM 1:6. incl demolition complete all as specified and as directed.

Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed.

M and L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed by EIC.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC.

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 30 mm thick factory made glazed skeletonwindow shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

Supply & Fixing 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified.

S& F 3.50 mm thick sheet plain glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed by Engineer-in-Charge.

S&Fin repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, including 20mm dia PTMT ball valve with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms complete all as specified and directed by Engineer-in-Charge

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per item No 48 here in before but fixed to walls with clamps complete all as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as directed.

S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

S&F (in repairs) vitreous china squatting pan 'orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 with WC connector pipe complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including 15 mm dia bore fancy type pillar tap , waste coupling, brackets, PVC waste pipe of 32mm, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair angle valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail.

S&F in repairs PTMT towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S& F in repair for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.

S&F for cup board/cabinet continous piano hinges, 30mm width of flaps, mild steel, bright finish or electrogalvanised complete all as specified and directd

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints.

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement.

M&L for preparing surface of wall priming new plastered surfaces with one coat wall care putty priming paint over two coat of Oil bond Distermper complete all as specified.

M&L for preparing surface of wall priming new plastered surfaces with white cement priming paint over two coat of cement base paint complete all as specified.

M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over a one coat of wall care putty complete all as specified

M & L Complete removal of existing treatment on old surfaces on walls two cement base paint over a coat of white cement primer including preparation of old surfaces complete all as specified and directed vy Engr in Charge.

Cleaning of sewage line and connected Manholes any length from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge.

(a) 100 mm bore dia of pipe

(b) 150 mm bore dia of pipes

Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specification complete, keeping aside serviceable items and removing to store for reuse within the same bldg or otherwise and removing U/S items from site. Note :- The decision of the Engr-in-Charge as to which material and or serviceable or otherwise credit to be afforded by the contractor for the unserviceable material shall be final and binding.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit , clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed

All as per item No.78 but one fan point controlled by one switch & regulator.

ALL as per item No.78 but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No.78 but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No.78 but one bell/buzzer point controlled by one switch

Description all as per item No.78 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed FRLSH cable for 3/6 pin 6/16 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano ( Penta PC ) flush button type 5 Amp single pole one way complete all as specified and as directed..

S&F socket outlet 2in1, 3 pin, 5 Amp ( Penta PC )flush type complete all as specified and as directed.

S&F switch piano ( Penta PC ) flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp( Penta PC ) flush type complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed.

S&F switch bell push ( Penta PC ) button type 5 Amp single pole complete all as specified and as directed.

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into cashing caping with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs including pvc cashing caping complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 12 ways 240 V complete all as specified and as directed .

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40/63 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series,complete all as specified and as directed.

Supply and fixing in repair 20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into existing ceiling rose complete all as specified and directed by Engr-in- Charge

Supply and fix LED 35W street light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminium IP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtr length with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesingle core PVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. Make:bajaj cat part no BRLEP20WLEDWH or equivelent of philips/Havells /CG

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

Supply and fixing XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 x 2 sq. mm,

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .

Returning fitting in soft/loose soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as directed

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complee all as specified and directed

Supply and fixing Double wall corrugated High Density polymer Ethylene (HDPE) pipe of size 50 mm diameter as per IS 14930 (part-2):2001 ,laid in trenchs/floors and fixing on walls/poles,with and including necessary fittingssuch as bends,socketand other connecteedaccessories etc for laying of electric cable,complete all as specified and directed

M/S L M Chourasia

M/s MM TRADERS

M/s Prakash Agencies

M/S Ramakant Chourasia

M/S JAI BHAWANI CONSTRUCTIONS

Krishana electronics

SHREE CONSTRUCTIONS

Attar Singh and Sons

I P Constructions

Bidder Name

Attar Singh and Sons

M/S L M Chourasia

SHREE CONSTRUCTIONS

SHREE SIDDHIVINAYAK TRADERS

M/S Ramakant Chourasia

M/s Prakash Agencies

M/s MM TRADERS

M/S JAI BHAWANI CONSTRUCTIONS

Krishana electronics

I P Constructions