Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC CAMP OFFICE RANGE ROAD CHANDIPUR BALASORE ODISHA 756025 | BALASORE | BALASORE | ODISHA | 756025 | ₹29.7 L Quoted ₹30.2 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹31.9 LRejected-Finance FLAT NO B 309 SAI RESIDENCY TCI CHOWK GOPOPALI SUNDERGARH ROURKELA ODISHA 769 004 | ROURKELA | SUNDERGARH | ODISHA | 769004 | ₹31.9 L | L2 | Rejected-Finance Not Being Lowest |
| 3 | L3₹36.2 LRejected-Finance SIKONA CHANDIPUR BALASORE ORISSA 756025 | BALESHWAR | ODISHA | 756025 | ₹36.2 L | L3 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | M/s UMAMANI CONSTRUCTIONS L2 | M/S RAJENDRA PRASAD L1 | RANA ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Drain out the Sewage sumps of capacity 6000/8000 glns and cleaning of sludges up to bottom level at sewage pump houses and taking out and depositing the sludge not more than 50 m ,including excavated earth and covered with earth and spreading bleaching powder all around as directed. | 22 | Job | 14,558.4 ₹3.2 L | 16,000 ₹3.5 L | 16,200 ₹3.6 L |
| 2.00 | Dismantling and taking down unservicible electric motor installed at Sewage pump house 3 phase 415 Volts, 15 HP capacity, disconnection of incoming electric connection from panel, stripping out burnt wiring, cleaning slots and rewinding the motor with super enameled copper wire as per existing size and gauge including insulating materials and varnishing, replacing worn out bearing as per existing size, reassembling the motor after rewinding and mounting on its original position including replacing the old unserviceable nuts, bolts and tested completed all as directed . | 4 | Job | 24,084 ₹96,336 | 24,000 ₹96,000 | 26,500 ₹1.1 L |
| 3.00 | All as per Item No.2 above but of capacity 7.5 HP | 2 | Job | 18,468 ₹36,936 | 16,000 ₹32,000 | 20,000 ₹40,000 |
| 4.00 | All as per Item No.2 above but of capacity 5 HP | 4 | Job | 13,446 ₹53,784 | 10,000 ₹40,000 | 15,000 ₹60,000 |
| 5.00 | Dismantling and taking down the electric motor of sewage pump set 15 HP capacity and transporting to work Shop and carrying out servicing/ maintenance of motor unit as per the following maintenance work:-
(a) Opening of electric motor and cleaning/ removing dust from Armature and field coil
(b) Cleaning of used/ old lubricated substance
(c) Cleaning of starter and rotor unit
(d) Checking and tightening of coupling, nuts, bolts and replacement of rubber insert.
(e) Carrying out heat varnishing with varnish solution of best quality for field and armature coil.
(f) Replacement of oil worn out bearings.
(g) Reassembling the complete motor and carrying out testing at work Shop and transporting back to installation and coupling with pumping set including necessary alignment, cable connection all as directed | 5 | Job | 7,257.6 ₹36,288 | 7,000 ₹35,000 | 8,000 ₹40,000 |
| 6.00 | All as per Item No.5 above but of capacity 7.5 HP | 2 | Job | 5,853.6 ₹11,707.20 | 6,000 ₹12,000 | 6,500 ₹13,000 |
| 7.00 | All as per Item No.5 above but of capacity 5 HP | 6 | Job | 4,330.8 ₹25,984.80 | 5,500 ₹33,000 | 5,000 ₹30,000 |
| 8.00 | Disconnecting the suction and delivery pipe line and electric connections of centrifugal non clogging pump set coupled with electric motor 15 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted. | 5 | Job | 7,257.6 ₹36,288 | 8,000 ₹40,000 | 8,000 ₹40,000 |
| 9.00 | All as per item No 8 but for centrifugal non clogging pump set coupled with electric motor 7.5 HP complete. | 2 | Job | 5,853.6 ₹11,707.20 | 7,000 ₹14,000 | 6,500 ₹13,000 |
| 10.00 | All as per item No 8 but for centrifugal non clogging pump set coupled with electric motor 5 HP complete. | 5 | Job | 3,628.8 ₹18,144 | 5,000 ₹25,000 | 4,000 ₹20,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹64,000
Closing Date
17 Jan 2026, 6:00 pmClosed
Garrison Engineer
GE (I) R and D Chandipur, Post-Chandipur, PIN-756025
REPAIR MAINTENANCE OF SEWAGE INSTALLATIONS, PUMPS AND ITS ACCESSORIES, CLEANING OF TANKS, REPLACEMENT OF SEWAGE PIPELINES, CONNECTED ELECTRICAL ITEMS AT PXE TECHNICAL AND RESIDENTIAL AREA CHANDIPUR AND PERIODICAL SERVICES
2025_MES_745508_1
8235/A/E8
Open Tender
Civil Works
270 days
GE (I) R AND D CHANDIPUR
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (I) R AND D CHANDIPUR
₹64,000
Yes
18 Feb 2026
20 Dec 2025
24 Jan 2026
20 Dec 2025
17 Jan 2026
3 Jan 2026
Drain out the Sewage sumps of capacity 6000/8000 glns and cleaning of sludges up to bottom level at sewage pump houses and taking out and depositing the sludge not more than 50 m ,including excavated earth and covered with earth and spreading bleaching powder all around as directed.
M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including taking out old all as specified and directed.
Supply and fixing in repairs PVC insulated and sheathed Copper Flexible Cable cable, 3 core, multistranded copper conductor of 1100 volts grade conforming to IS-694, of size 10 sqmm in PVC conduit from starter to sewage pump Make-Havells/Finolex/Polycab.
Supply,laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size of size 35 sqmm 3.5 core complete as directed.
Supply and laying burnt bricks sub class 'B' laid perpendicular over & cushioning for cable protectioncomplete all as specified & directed at site by the Engr- in Charge.
M & L for taking out old corroded unserviceable MS sheet cover, frame etc from top of the roof of the under ground sewage sump with MS channel base square / circular type , of any size and shape including providing of new cover made out of 3.15 mm MS sheet cover with 50 cm X 50 cm X 6 mm angle iron base frame including painting with two coats black bituminous paint over a coat of red oxide primer complete with locking arrangements all as specified and directed.Note-MS sheet and angle iron only be measured for payment .
ITEM NO-49
Complete removal of existing treatment by manually/ mechanically on walls /ceiling & cornices etc.by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil & greasy spots incl washing, rubbing down and stopping of painted surfaces at any height of the bldg complete all as specified and directed. (Note : (1) Rate quoted shall be inclusive of all scaffolding, props and other T&P)
M&L for applying 1mm thick wall care putty of approved make to prepare the surface even and smooth at any height of the bldg complete all as specified & directed.
M&L for applying two coats of acrylic emulsion distemper with one coat of alkali resistant priming paint of shades as approved by GE at any height of the bldg complete all as specified and directed.
M&L for applying two coats of 100% acrylic emulsion exterior paint over a coat of primer of shades as approved by GE at any height of the bldg complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil & greasy spots and applying one coat of 100% acrylic emulsion exterior paint of shades as approved by GE at any height of the bldg complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil & greasy spots and applying one coat of acrylic emulsion distemper of shades as approved by GE at any height of the bldg complete all as specified and directed.
All as per item No 22 above but for 100 mm dia bore pipe
M&L for preparation of old decorated surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss & efflorescent salts and trading oil & greasy spots and applying one coat of cement based paint of shades as approved by GE at any height of the bldg complete all as specified and directed.
M&L for preparation of old decorat
M&L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint at any height complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint at any height of bldg/sign board complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
BOQ_834776.xls
BOQ • 0.35 MB
Tender8235A.pdf
Tender Documents • 1.14 MB
Download all tender documents and submit your bid
