8937-NIT-37-22-23 CERTAIN REPAIR /MAINTENANCE OF INTERNAL ELECTRIC POINT WIRING, SUB MAIN WIRINGs, DBs AND EARTHING IN ZONE A OTM ACCN UNDER GE NORTH BATHINDA AT BATHINDA MIL STN

Amount

SCHEDULE 'A' E/M Works

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed/ surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly and existing MS Sunken box and including new 3 mm thick laminated sheet ( Make - Hylem/Anchor) ISI Marked for mounting of switches and socket fan regulator, for light/fan/bell point etc., complete all as specified and directed by Engineer-in-charge. Make of cable :- Havellls/Dcab/Anchor

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All As per item No 2 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.

All As per item No 2 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as hylem sheet switches,ceiling rose , pendent holder, sockets,regulators including rusted/broken concealed/surface conduit and sunken boxes etc and making good disturbed surfaces of wall and floor etc to match with the existing, complete all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable size (min 60mm deep, suitable length and 1.2mm thick ), 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and as directed by Engineer-in-charge. Make of cable :- Havells/Dcab/Anchor

All as per item No 9 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 9 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 9 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as hylem sheet switches,ceiling rose , pendent holder, sockets,regulators including rusted/broken concealed conduit and sunken boxes etc and making good disturbed surfaces of wall and floor etc to match with the existing, complete all as specified and directed by Engineer-in-charge.

Material and labour for surface point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulate unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC casing caping (heavy duty ) suitable size as directed with all fittings and all accessories but including 3mm thick bakelite plastic laminated sheet (fixed with brass screws & cup washers ) for mounting of switches and socket fan regulator, for light/fan/bell point ,controlled by one switch including provn of 1.5 sqmm FRLSH PVCinsulated multi strand copper conductor wire continuoues as earth wire connected to earth dolly etc complete all as specified and as directed by Engineer-in-charge. Make of cable and conduit :- Havellls/Dcab/Anchor

All as per item No 14 here in before but for socket outlet 3 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 14 here in before but for socket outlet 3 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 14 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing Socket outlet, 2 in 1, 3 pin, 5/6 Amps, flush type complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing switch piano flush type, single pole, one way, 15/16 Amps ISI marked, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing Socket outlet, 2 in 1, 3 pin, 15/16 Amps, flush type, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing switch piano flush type, single pole, two way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing modular Socket 6 A-2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing modular Switch 2 way 6A, 1 module 250 volts AC ISI marked, model fantasy with suitable frame and covers witch matching colours, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing Bell push, flush type, 5 amp 250 Volts, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing in replacement of stepped type electronic fan regulator flush type on existing sheet, complete all as specified and directed by Engineer-in-charge. Make:-Anchor/Havells/Legrand/Indoasian.

Supply and fixing in replacement of ceiling rose 3 phase flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb, complete all as specified and directed by Engineer-in-charge. Make of holder : Anchor/Havells/Legrand/Indoasian/SSK

Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge. Make : Anchor/SSK /Havells/Legrand.

Supply and fixing in replacement wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copperconductor cable of suitable size upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement wall mounted/surface mounted decorative wall light fixture in cylindrical/Doom profile made up of polycarbonate for and including LED 7 Watt lamp, base B22, complete fitting with LED lamp and all other fixing accessories including electric connection connecting with using flexible copper wire twin core, complete all as specified and as directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement recessed LED ceiling lite with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement energy saving IP 66 flood light luminaire with high power COB LED light fitting 70 watt LED, 5000K complete fitting with LED and all other accessories and fitting arrangements including connecting electric connection, complete all as specified and directed by Engineer-in-Charge. Make : Crompton/Havells/Wipro/Philips

Supply and fixing in replacement Sleek Pressure die cast aluminium housing, heat resistant glass, energy saving, IP65 protection, better optics for uniform distribution street/Roadway luminaire with high power LED 25 watt complete fitting with driver, LED strip and all other accessories etc, suitable for direct mounting on pipe bracket, fixing on wall with and including brackets made out of GI tubing lightwith suitable bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size, complete all as specified and as directed by Engineer-in-charge. Make - Crompton/Havells/Wipro/Philips

Supply and fixing in replacement wall mounted study lamp bi-directional type prewired with lamp holder B22 based suitgable for and including LED candle lamp 3 watt and making electrical connections, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement LED Post top lantern 20 watt, IP65, with cast aluminium spigot housing, with decorative clear opal acrylic diffuser, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system including all electric connections, including taking down old unserviceable fitting any type, complete all as specified and as directed by Engineer-in-charge. Make :-Crompton/Havells/Wipro/Philips

Supply and fixing in replacement of 3mm thick phenolic sheet 4 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 7 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 8 inch x 10 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of 3mm thick phenolic sheet 10 inch x 12 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge. Make - Anchor/Hylem

Supply and fixing in replacement of switch piano flush type, 5/6Amps, 250 volts, single pole, one way fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement of Socket outlet multipurpose. 2 in 1, 5 pin 5/6 Amp, 250 volts flush type fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement of Socket outlet multipurpose. 2 in 1, 5 pin 15/16 Amp, 250 volts flush type fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent.

Supply and fixing in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement of switch piano flush type, 15/16Amps, 250 volts, single pole, one way fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge. Make : Anchor/SSK and equivalent

Supply and fixing in replacement of Modular switch socket combination 16A, 6 pin, 3 module fixed on existing mdoular sheet, complete all as specified and as directed by Engineer-in-charge. Make : Legrand and equivalent

Supply and fixing in replacement of Modular switch socket combination 3 pin, 5A, flush type 250 volts flush type fixed on existing modular sheet, complete all as specified and as directed by Engineer-in-charge. Make : Legrand and equivalent.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Make : Anchor/Havells/Dcab

Material and labour for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi -stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Make : Anchor/havells/Dcab.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Make : Anchor/havells/Dcab.

Material and labour for submain wiring complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including PVC conduit size 20 mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Make : Anchor/havells/Dcab.

Material and labour for PVC conduit 25mm dia (non metallic, heavy duty), fixing on wall surface including all fitting arrangement i.e. PVC clamp, rawl plug, pipe hook, screw, terminal box, junction box, tee, bend, PVC round plate, bell mouth tube ends, couplers etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through conduit and re-connection with existing instruments as per original, complete all as specified and as directed by Engineer-in-charge.

Material and labour for casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original, complete all as specified and as directed by Engineer-in-charge.

Supply and fixed in replacement of Electronic driver suitable for Led ceiling lite of 36 watt of size 2' x 2', complete all as specified and as directed by Engineer-in-charge. Make : cat part No : LED DRIVER 36V36WS of Havells/SODRVI-27-1100-36W of Crompton and equivalent.

Supply and fixed sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable MCB DB's, complete all as specified and directed by Engineer-in-charge.

Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc. and including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.

Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc. and including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 8 way 415 Volt,(concealed in wall or as directed) dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc., complete all as specified and directed by Engineer-in-charge.

Supply and fixed MCB SP suitable for 230 volts AC supply 5/6 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP, complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB SPN 40-63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN, complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB SPN 32 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN, complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB TPN 63 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA including taking down old unserviceable MCB TPN, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of MCCB of capacity 100 Amp, FP, 415 volt, short circuit breaking capacity not less than 16KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc , MCCB fixing in new DB or the existing DB/Panel including making incoming, outgoing connections complete all as specified and as directed by Engineer-in-charge . Note :- DB shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC/Gyeser supply including taking down old unserviceable enclosure, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement LED tube (retro) rod only (100 lumens per watt), 6000 K, appx 4 feet long with in built driver, fixed in existing fitting/batten including making elctric connection and minor repair/tightening loose connection, cleaning, and testing, rod fixing at any site as per daily complaint basis, complete all as specified and directed by Engineer-in-charge. Make : Cat pt No : BLRB 18W of Bajaj/LT-8-20-865-2 of Crompton/Cat pt No :PHOTONULTRA 1213T8SSTL18W LED865 PC of Havells.

Supply and fixing in replacement of LED strip of 22 watt wide viewing angle for good light distribution, easy to install including led strip driver, complete all as specified and directed by Engineer-in-charge.

L H ENTERPRISES

M/s VISHAL ELECTRIC STORE

NASIB ENGINEERS AND CONSTRUCTION

SHARDA ENTERPRIES

Aman Enterprises

M/s Kataria Construction Company

M/s PANKAJ KUMAR