SUPPLY OF CONSUMABLES/NON-CONSUMABLES for the department of Central Stores furniture

EMERGENCY & RECOVERY TROLLEY with wheel: ( 3 years warranty ) Overall size: 1905 mm L x 710 mm W x 660 mm Min. H. and 910 mm Max. H. - Mattress Plotform : 1785 mm L x 555 mm W. Stretcher Dimension Appox. : 1830 mm L x 555 mm W. - Height adjusted by foot operated high quality hydraulic pump. The pump shaft actuation stroke length is 140 mm with push force 10KN at 270 bars. No of stroke required to acheive maximum height is 25 nos. Trendelenberg & Reverse Trendelenberg assisted by two gas spring for easy , smooth and jerk free action. Trendelenberg - 190. - Reverse Trendelenberg - 60. - Removable Two section stretcher supported on MS tubular frame size 25.4 mm x 2 mm (14 G). - Top is made from decorative laminated (compact) sheet of 8 mm thick. Backrest is raised by ratchet mechanism having five different position as 250, 350 , 450 , 550 & 650. Ratchet mechanism is consists of SS 304 rod having diamater 12 mm and flat size 275 mm x 6 mm. - X ray casstte holder in MS "L" channel size 25 mm x 25 mm x 2.0 mm (14 G) with aluminium channel 22 mm x 14 mm x 2.6 mm thick. Synthetic rubber cover on pushing handles having rod size 12 mm attached to MS frame made from 60 mm x 30 mm x 1.2 mm (18 G). Four corner rubber buffers of 135mm diameter. MS tray having size : 310 mm x 260 mm made from 1.2 mm (18 G) CRCA sheet. Mild steel tubular frame work made of 60 mm x 30 mm x 1.2 mm (18 G) supported by MS tube 25 mm x 25 mm x 1.2 mm (18 G) 25.4 mm x 1.2 mm (18 G) and linkages made from flats thickness 10 mm. This frame is mounted on four 125 mm dia. castor with synthetic body two with brakes and two without brakes. Side railing- lifting and fixing (not button type) suitable for Stretcher on Trolley (pair) with S.S. tubular frame. The railing height (Effective Height) above stretcher top so that pateient should not fall.. Safe working load of 165 kgs and patient load bearing capacity of 135 kgs.Supplied in Semi SKD condition. Supplied with M.S storage tray. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Standard Accessories: Swing away type Railing suitable for Stretcher on Trolley (pair) with S.S. tubular frame. Telescopic I.V. Rod with 2 Hooks provision at four locations. Oxygen Cylinder Cage With Epoxy powder coated. M.S. Storage Tray. Safety belts Rexine Covered 50mm thick Mattress made from PU foam having 40 density with Two sections.Should provide one hydraulic set and one set of wheels for each trolley purchased.

BASIC FOWLER BED: (Four Section) with wheel ( 3 years warranty ) Overall Size: Approx 2090 mm L x 920 mm W X 600 mm H (Without Mattress).(Without Castor). Overall Size Buffer to Buffer: Approx 2140 mm L x 970 mm W X 600mm H (Without Mattress). (With Castor). Bed Platform frame size: Approx 2070 mm L x 910 mm W. Mattress Platform size: 1970 mm L x 790 mm W. Buffer to Handle Length: 2275 mm. Height: 600 mm. should be adjustable upto 100mm. Four section 1.2 mm (18 G) CRCA M.S/HDPE perforated sheet top for easy breathing of mattress. Backrest section is welded with MS CRCA /HDPE tube size 25.4 mm x 2.0 mm (14 G) and Leg section is welded with MS CRCA tube 25.4 mm x 1.6 mm ( 16 G ) for support. The size of perforated hole is having 21 mm diameter. Screw mechanism welded with ERW MS tube 31.75 mm x 1.2 mm (18 G) in M.S. cover made from dia 38.10 mm x 1.6 mm (16 G) ERW tube. Manual adjustments: Backrest, knee-rest through two screw systems with thrust bearin

gs individually manoeuvred by a single handle. should also have height adjustment. Size of Back Rest: Over all - 785 mm L x 795 mm W. Only section : 720 mm L x 795 mm W. Size of Knee Rest : Over all - 470 mm L x 820 mm W. Only Section : 380 mm L x 795 mm W. Size of Leg Rest : Over all - 610 mm L x 795 mm W . Only Section : 610 mm L x 795 mm W. Size of Fix Section : Over all - 140 mm L x 780 mm W. Only Section : 610 mm L x 780 mm W. Raised Backrest Angle - 65⁰. Raised Knee-rest Angle - 40⁰. Back rest - min 45 % of the frame length of 750 mm - O.K. Bed frame made from 60 mm x 30 mm x 1.6 mm (16 G) Thick ERW tube shall have proper support. This frame is fitted on H leg made from ERW tubes diameter 31.75 mm x 1.2 mm (18 G) thick and diameter 22.22 mm x 1.2 mm (18 G) thick and MS sheet/HDPE material having thickness 3.0 mm (11 G). The bed has head & foot panels detachable by hand without need of any tool. These head & foot panels are mounted in round bracket size 50 mm OD x 48 mm ID made from MS sheet or HDPE material having 2.0 mm (18 G) thick and welded with bed frame and used along with PVC sleeve. Four corner rubber buffers of 100 MM dia for with castor application. There are four locations on the bed platform to hold stainless steel Telescopic Saline rod 12mm dia with 15.87 mm dia x 1.2 mm (18 G) stainless steel outer covering tube with a knob to mount syringe pump. Patient Working Load - 130 kg. Safe Working Load - 150 kg. Finishing & workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free. M.S. tubular parts, linkages, flats are to be In-house, pre-treated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Accessories: Polymer Moulded Handle. H' Type Legs 910 mm W & 600 mm Height with 125 mm(5") dia High Grade Synthetic Body Castors, two with brake, two w/o brake (Imp) . S.S Laminated Head & Foot Boards (0182G) (Diameter of SS 304 tube is 31.75 mm x 1.2 mm (18 G) thick with 12 mm thick pre laminated MDF board. Length of Head bow and foot bow are 900 mm, Height of Head bow & Leg Bow is 370 mm (without Mattress). Telescopic I.V. Pole with 2 hooks. Urine Bag Holder. Provided with four section 4” thick PU Foam of 40 density covered PVC .The Back Rest size is 760 mm L x 865 mm W x 100 mm T , Fix section size is 180 mm L x 865 mm W x 100 mm T , Knee Rest size is 416 mm L x 865 mm W x 100 mm T and Leg Rest size is 620 mm L x 865 mm W x 100 mm. Should have hand railing made of HDPE boards on both sides with manual down movement for collapsing . Mattress Arrestor Set of two. One set of wheels and One Hydraulic set should be provided alongwith each cot purchased.

Rectangular Steel Teapoy with shelf: Size: 92 cm x 46 cm Plywood with Mica finish, Wooden beeding, ¼” thick plywood with mica top, all 18G or better square pipe and ‘L’ shelf made of 18G or better C.R. sheet, 2.5 cm square pipe.( 2 years warranty)

Steel Revolving Executive High back chair with arms: Lumbar support, with foam cushion 10 cm covered with fine quality cloth for seat and back, Steel revolving base fixed at bottom of the chair, Size: 74 cm (W) x 74 cm (D) x 100 cm (H) to 25mm Square tubular Frame SS 16G or better. Seat, back and armrest to be made of good quality. Wheel in 3'/8 thread type. Additional spare of 10 wheels and 4 Hydraulic for every 20 nos. of chairs ordered should be provided. (2 years warranty ).

Steel Executive High Back Ergonomically Chair: Mesh Office High Back Chair Seat and backrest follow the movements of the user synchronously thus ensuring the correct seated posture. Infinite adjustment of the backrest counter pressure by means of side tension control, for body weight of approximately 125 Kg. The synchronise movement can be locket in five positions. Seat depth adjustment Additional spare of 10 wheels and 4 hydraulics for every 20 nos. of chairs ordered should be provided.

All-purpose steel stool: Made up of M.S. Sheet 16G thickness with square top size: 300 mm. 16G tubular frame 22mm dia and Height 510mm with rubber shoes. ( 2 years warranty ).

Steel revolving stool with SS top: Revolving stool made of 2.5 cm dia tubular M. S. frame with four legs. S. S. Sheet 31 cm dia 18G or better for top with four stiffness channel of 16 G or better M.S flat, (top is fit with 6mm rivet) in 16G or better square threaded 2.22 cm dia shaft of 41 cm length. Size 41 cm (height). Pretreated and powder coated.( 2 years warranty ).

Steel Almirah (BIG): Steel Almirah (Big): Size: 1980 mm x 900 mm x 480 mm. All sheets made with 18G thickness. Five compartments strongly fixed for carrying load. Double door with suitable locking(ISO) arrangement with handle.And with stable base Colour: olive green./TA grey, should provide suitable sturdy plastic foot stands for mounting the almirah ( 2 years warranty ).

Steel Almirah (SMALL): Minor cupboard: Size: 127 cm x 76 cm x 43 cm. All sheets made with 18G or better thickness, four compartments strongly fixed for carrying load. Double door with suitable locking arrangement with handle. Pretreated and powder coated. Colour: olive green/ TA grey. Locks should be ISO certified.( 2 years warranty ).should provide suitable sturdy plastic foot stands for mounting the almirah

Steel Locker 18 Pigeons hole Locker: B18 Locker Size: 30 cm x 30 cm x 43 cm. Over all size: 198 cm x 99 cm x 48 cm. Every locker should be provided with individual door pad lock arrangement. Ventilating louvers and name holder.And with stable base. All sheets made of 18G or better. Colour: Olive Green.( 2 years warranty ).

Steel filing cabinet: Made of 18G sheet with four drawers with single locking arrangement at the top. Size: 1380 mm x 470 mm x 700 mm. Drawer movement should be on rails with balls. Every drawer should be provided with name holder and good quality handle. Colour: TA Grey/Ivory with Brown. Locks should be ISO certified.( 2 years warranty ).

Steel bookshelf: Made of 18G sheet. Size 1680 mm x 840 mm x 300 mm. Four compartments with top push-in-type glass doors and individual locking system with handle at both edges. Colour: olive green/TA Grey. Locks should be ISO certified. ( 2 years warranty ).

Steel closed rack with four compartments: Size: 1980 mm x 900 mm x 480 mm (closed on three sides). All sheets made of 18G. Angle 30 mm x 3 mm The ground clearness of 15 mm Colour: olive green/TA Grey.( 2 years warranty ).

Steel small office files rack: Closed on two sides only. Size: 900 mm x 900 mm x 380 mm with two shelves, made of 30mm x 3mm angle and sheets made of 18G. The ground clearance of 7.5 mm height. Colour: Olive green/TA Grey.(2 years warranty).

Shoe Rack Steel (Chappal Stand): 915x915x380 mm made of 1 1''/4 x 1''/8 Angle & sheet 18G with 4 steps, slanting position. 3 side closed with 18G or better Sheet. (2 years warranty)

S.S. Medicine trolley: Size: 76cm x 51cm x 82cm with 22mm tubular pipe framework of 18G or better mounted on four 100mm dia double ball race swiveling caster wheels. SS 18G or better sheet shelves mounted on SS rails of 10mm dia, welded at both at the inner and outer edges with tubular framework with a piece of metal. SS rails 10mm dia on four sides over both the shelves. Wheels preferably "Rexola".(2 years warranty).

S.S.Dressing trolley: Size: 76cm (L) x 51cm (W) x 82cm (H). 22mm tubular framework of 18G or better SS pipe mounted on four 18 cm dia double ball race swiveling caster wheels. Two SS shelves 20G or better shelves mounted on SS rails of 10mm dia, welded at both at the inner and outer edges along with tubular framework with a piece of metal. SS rails 10mm dia on four sides over both the shelves. To provide with SS bowl with lid and SS bucket (5lt.) suitably. Wheels preferably "Rexola".(2 years warranty)

S.S. Soiled Linen Trolley: Overall size : 960 mm H x 510 mm dia SS tubular framework made of 25.4 mm x 1.2 mm (18 G) SS 304 fitted with three .

Acrylic Door covered Notice Board (portrait): Size:61cm x 122 cm x 61 cm . Front cover should be made with single door, of aluminium framed acrylic sheet and should be lockable. Aluminium should be anodized upto 25 microns. Door should be made of 3 mm clear acrylic sheet.The inner portion should be finished with soft material (Felt cloth) and minimum 9 mm thick. Corners should be made of 100% virgin ABS material and chromium plated. The board shall be provided with suitable wall mounting mechanism and necessary fitting clamps. The clamps should be heavy duty to take the weight of the board. ( 2 years warranty ).

Acrylic Door covered Notice Board (landscape): Size:122 cm x 61 cm x 122 cm . Front cover should be made with two doors, of aluminium framed acrylic sheet and should be lockable. Aluminium should be anodized upto 25 microns. Door should be made of 3 mm clear acrylic sheet.The inner portion should be finished with soft material (Felt cloth) and minimum 9 mm thick. Corners should be made of 100% virgin ABS material and chromium plated. The board shall be provided with suitable wall mounting mechanism and necessary fitting clamps. The clamps should be heavy duty to take the weight of the board. Locks should be ISO certified. ( 2 years warranty ).

Three fold Screen stand: Size:168 cm height 245 cm with 3'/4" 18G or better MS tubular constructions in three sections. Middle span 121 cm wide mounted on four swivel castors 50mm diameter, side span 61 cm wide each rotating on one swivel castors 5 cm diameter supplied with hooks and springs for curtains. Inches are in bush type male female, inside dia 6mm outer 10mm. Pretreated and powder coated. (2 years warranty).

Steel I.V. Stand (double hook): 22mm dia tubular construction mounted on cast iron heavy base fitted with five 10cm dia double ball race swiveling castor wheels. S. S. rod with double hooks. Height adjustable frame 137cm to 243cms. Pretreated and powder coated ( 2 years warranty ): additional spare of 10 wheels should be provided for every 20 nos. of IV stand purchased.

Laboratory chair: High Back Revolving with Back tilt and locking, Designed with 360 degree-revolving type, with pneumatic or hydraulic height adjustments, MS chrome plated pedal base. Type of chair base: With nylon castor wheel 5 nos. (with diameter of min 50 mm). Minimum thickness of MS Plate Joining the backrest with seat of the chair: 2 mm. Seat base Hot pressed plywood with PU foam of actual density 32 (kg percubic meter) and thickness 40 mm. Actual seat height from floor surface (mm) 430 mm, Seat height adjustment (mm) 100 mm, Actual width of seat and back rest (mm) 480 mm, Actual depth of seat (mm) 480 mm, actual height of back rest 660 mm, Seat and back upholstery material Leatherette. Fixed armrest on both sides with under-structure material of PP (polypropyelene). 20 mm diameter foot ring should of SS steel should be attached in the middle of wheel and seat. Colour as per buyer choice. (warranty 2 years) Additional spare of hydraulics 2 nos and 10 wheel has to be provided for every 10 nos. of chairs purchased.

Moulded foam Pillow: with 1 layer 10mm foam tough cloth cover and outer tapestry cloth. Size 61cm x 36 cm x 10cm

Steel Revolving knylon knitted low back chair with arms: With steel 25mm SS tubular Frame 16G or better both seat and back knitted with good quality nylon, Steel revolving base fixed at bottom of the chair, Size: 80 cm (W) x 80 cm (D) x 85 cm (H), Frame 16G or better. armrest to be made of one piece, well rounded polyurethane that is indifferent to climatic conditions.Good quality Wheel in 3'/8 thread type. ( 2 years warranty ). Additional spare of 10 wheels and 4 hydraulics for every 20 nos. of chairs ordered should be provided.

Steel Patient’s Examination Table:– Adjustable head section (+ 35*) incl. longitudinal and transversal bracing , powder coated .Upholstery 50mm,incl pape . dimension 1950 x 650 x 800 mm. Top with M.S.sheet 18G or better The head flap adjustable.(note - head rest should not hang independantly it should incl along with 4 legs of the table.) on toothed rack. Tubular legs should be made of 2.5 cm dia with 18G or better ERW pipe – provided rubber bush and finished in over backed white enamel paint,with suitable good quality mattress. ( 3years warranty )

Domestic cot: Single bedded size of Steel M.S. 18G or better Sheet, 18G or better M.S. pipe ( 3 years warranty )

STAINLESS STEEL RIGID WHEELCHAIR WITH CUSHIONED SEAT AND BACK: Overall size: 1120 mm D x 680 mm W x 935 mm H. - SS tubular frame work of diameter 22 mm x 1.2 mm (18 G) except for the four widthwide stays of diamter 19.05 mm x 1.2 mm (18 G) SS tube. Stainless steel tubular frame works with fitted cushioned seat and back is mounted on two 200mm diameter Swivel Castor mounted on SS tube of diameter 25.4 mm x 1.2 mm (18 G). The castor is having semi round rubber hardness : 80 shore fitted over polyamide molded pulley. The wheel shall have two number ball bearings and 3/8 “ nut and bolt. The size of cushioned seat is 430 mm L x 418 mm W x 65 mm H (Thickness) and size of cushioned back is 400 mm L x 390 mm W x 50mm H (Thickness). Cushion Seat and back is made for P.U. foam having 32 density. Thickness of Rexene : 0.6 mm. Seat section provided with 12 mm ply frame. Back seat (cushion) : No MS flat. Provided with wooden frame size fitted with wooden screw to ERW tube. Two Adjustable aluminium footrest provided 75 mm above the floor. Arms : Two nos. inject molded from black polypropylene and fixed with bolts to the tubular arms. Two solid rubber tyre bicycle wheels diamter 635 mm with brakes and provided with S.S hoops made from Diameter 15.8 mm x 1.2 mm (18 G) tube for self propulsion. Two handle with proper hand grip made from black PVC provided. The the outer diameter of wheel rim made from MS is 600 mm. The diameter of the spoke made from MS is 2.6 mm. Total nos. of spoke used is 32. The spoke is fixed with wheel rim with the help of MS nut. Patient bearing and Weighing bearing capacity 135 Kgs. The wheel rim and spokes are nickle - chrome plated. All the SS parts should be of 304 grade material. Finishing & workmenship of high standard. All corners shall be rounded off so that there shall be no sharp edge. Safe working load of 150 kgs. Supplied in KDC condition. Standard Accessories: Safety belts, Molded Chart holder. (3 years warranty ).

FOLDABLE WHEELCHAIR: ( 3 years warranty ). Overall dimensions : 1070 mm L x 660 mm W x 940 mm H. Height floor to seat : 450 mm. Back support height above seat : 430 mm. Seat width : 450 mm W x 400 mm L. Mild Steel tubular frame works made of 22.22 mm x 1.2 mm (18 G) round MS tube mounted on two front castor wheel having 200mm diameter and outer with solid rubber. Frame is provided with MS plated side penal. Cross bar is made of 22.22 mm x 1.2 mm (18 G) MS round tube. Two solid rubber tyre wheels of 24 " with brakes and provided with Polymer Molded hoops of diameter 21 mm for self propulsion. This hoop is made of polymer molded rod / tube having diameter of 17 mm. Seat and back is made of leatherite cusion material. Two Adjustable aluminum die casted footrest with up down and swivel type adjustment. Provided with fixed type PU molded Arm rest for better arm support and holder base made of ABS material. Provided with leatherite strap for calf rest. Back is provided with poccker for keeping documents and tools. Ha

ndles provided with molded PVC grip to push the wheel chair. Patient bearing and Weighing bearing capacity 135 Kgs. Hand brakes provided to lock theh wheelchair at desired location. Provision of extended base with molded plastic grip to lift the wheelchair front to overcome obstructions while maneuvering. Mild Steel frame is having nickel chromium plating. Provided with patient safety belt. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ).

Crash Cart: ( 3 years warranty ). Overall Size: 960 mm L x 500 mm W X 1545 mm H.The crash cart should have 25.4 mm x 1.2 mm (18 G) Stainless steel tubular frame work. The emergency equipment cart should have the following facilities: 6 Nos. hand out bins to keep important supplies easily accessible of size approx 110 mm W x 125 mm D x 75 mm H. Two lockable box units made of high impact polystyrene with 3 drawers should have dimension 305 mm L x 380 mm D x 320 mm H. The three drawers each to hold emergency medicines, ambu. bags, IV solutions, catheters, etc. separately and methodically in boxes of sizes approx - 85 mm W x 85 mm L x 50 mm H – 6 nos., - 85 mm W x 175 mm L x 50 mm H – 3 nos. and 85 mm W x 255 mm L x 50 mm H – 4 nos. Facility to carry monitors, ECG, suction apparatus on open areas at top centre and bottom shelves. Stainless steel saline rod made of 12 mm dia. 304 grade S.S. approx. 750 mm long and bent at top to have an arm of 400 mm approx. at the end of which of 6 mm dia. S.S. hook shall be welded with TIG process. Crash cart with 125 mm dia non-rusting castor two with brakes and two without. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Provided with round rubber buffer, one on each corner. The size of middle and bottom shelf is 620 mm L x 388 mm W made from SS 304 0.9 mm (20 G) sheet. The shelf are provided with railing on three sides. This railing is made from SS 304 Rod of diameter 10 mm. . The size of top shelf is 670 mm L x 235 mm W made from SS 304 0.9 mm (20 G) sheet. Two side support size 237 mm W and 75 mm made f+B42rom SS 304 2.0 mm (14 G) sheet provided to top shelf. Pullout cardiac massage board made of MDF of minimum size 670 mm x 330 mm x 12 mm laminated on top and bottom of laminate of 1 mm and 0.6 mm respectively. MDF shall have water resistance property and it should be made from eco friendly material. Oxygen cylinder cage epoxy powder coated, on one side. Handle for pushing the crash cart is made from SS 304 tube size 25.4 mm x 1.2 mm (18 G) and SS flat size 25 mm x 5 mm thick , provided on other side. Safe Working Load & Patient bearing capacity - 50 kg. Supplied in KDC condition.All stainless steel wherever used should be 304 grade. S.S parts finished with Matt Polish. M.S. tubular parts, linkages, flats aluminium base are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Bedside Locker: with Membrane Pressed top ( 2 years warranty ). Overall size: 400 mm x 400 mm x 820 mm H. Over all size from Handle to buffer : 454 mm x 820 mm. Body consisting of 2 sides and back are made from one piece of 1.0 MM (20 G) MS CRCA sheet. Fitted with top with raised edges of 8.0 mm on four sides and pressed with mambrane material. Drawer front and cabinet door front also made from mambrane pressed material . Mambrane material used of UV-rays resistant of 400 microns thick. Drawer and cabinet is made of 1.0 mm (20 G) CRCA MS sheet.

Adjustable Bedside Table: ( 2 years warranty ). Overall approx size of top should be 960 mm L x 420 mm W from handle to base. Top size is 810 mm x 355 mm. M.S. Tubular telescopic stem made from MS CRCA sheet 2.0 mm (14 G) with hardened EN grade meterial gear and SS handle with HDP bush for grip for height adjustment from approx.: minimum 715 mm to maximum 1080 mm. M.S. Tubular stem is connected with base with the help flat size 57 mm x 57 mm x 6 mm thick having thread size M8 & bolts. MS flat size 100 mm L x 50 mm W x 5 mm thick is welded at the bottom of the base at telescopic stem area for strength. Two sections top shall be fixed on frame work made from 19 mm Square ERW tube and MS HR flat 20 mm x 5 mm and 170 mm L x 50 mm W x 6 mm thickness. Size of Fixed section is 205 mm x 355 mm. Size of adjustable section is 610 mm x 355 mm. Bigger section of the table top should be hinged & could be inclined to three raised position options. The raised position is achecived by three slot provided in MS flat size 70 mm x 3 mm and lever made from MS rod diameter 6 mm. The one end of the rod is covered with red color PVC sleeve. Small section is mounted on the telescopic stem with help of MS "U" shape external size 120 mm x 96 mm x 6 mm. welded with 19 mm square tube. Weighing bearing capacity 20 Kgs. All the three sides of the bigger section and small section of the top should be provided with raised Aluminum T chennel edge to prevent things from the top. Base of

the adjustable table should be made from 60 mm x 30 mm x 1.6 mm (16 G) M.S. rectangular tube and should be fitted with four twin wheel castors made from anti rusting material with wheel dia 50 mm , all without brake. Finishing & workmanship in the furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ).

Mayo’s Trolley: Adjustable height of SS tray from approx 730 mm to 1300 mm. Tray size approx : 560 mm L x 400 mm W. SS tubular frame mainly made of 31.7 mm dia x 1.2 mm (18 G) round tube. Tray made from 0.9 mm (20 G) thick S.S. 304 grade sheet. - O.K. Tray frame made from SS fllat size 25 mm x 5 mm with a cantilever of 10 mm dia SS 304 grade rod and SQ. bar of 16mm S.S. 304. SS tubular frame mounted on four swivel, twin wheel non rusting castors of 50 mm wheel dia. All without brake. SS parts finished with Matt Polish. Supplied in SKD condition. Load bearing capacity : 5 Kgs. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). ( 2 years warranty ).

Single Step Stool: Size: 510mm Lx 300mm W x 230 mm H. Step height 230 mm. Step made of 1.2 mm (18 G) MS CRCA sheet. Welded on MS. tubular frame of 25.4 mm x 1.2 mm (18 G) fitted with aluminum tread flats of size: 500 mm L x 32 mm W x 3.4 mm thick fitted by aluminum pop rivet. MS tubular frame is supported with MS rod diameter 10 mm.The legs fitted with high quality PVC shoes with nylon reinforcement. Load bearing capacity : 135 Kgs. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.( 2 years warranty ).

Double Step Stool:- Size: 600 mm L x 515 mm W x 450 H. First step height 230 mm & second step size 450 mm. Step made of 1.2 mm (18 G) MS CRCA sheet. Welded on MS tubular frame of 25.4 mm x 1.2 mm (18 G) fitted with aluminum tread flats of size: 500 mm L x 32 mm W x 3.4 mm thick fitted by aluminum pop rivet.Load bearing capacity : 135 Kgs.The legs fitted with high quality PVC shoes with nylon reinforcement. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. ( 2 years warranty ).

Kick Bucket with Castor Wheel:- ( 2 years warranty ). Stainless steel bowl of approx.dia 375 mm. Overall Height is 345 mm. SS tubular framework fitted with three 125 mm dia non-rusting castor wheels, all without brake. Castor made from non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Frame work made of 25.4 mm dia x 1.2 mm (18 G) verticals stainless steel tubes, upper ring made of rod dia 10 mm. S.S. rod and tubes shall be of 304 grades. SS parts finished with Matt polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Uro stand: Triangle shape uro stand made of 8 mm rod of height 45 Cm with base 21cm x 26 cm with rubber shoes at bottom and one hook on top.( 2 years warranty ).

Swab Stand: Hook for Hanging towel, tray for collecting waste with 4" swivel castor. Full stainless steel, Wheels preferably "Rexola". ( 2 years warranty ).

Steel Double basin stand: ERW steel tubular pipe constructed on four 6.5 cms. Dia. Castors. Provision for two 35 cms. Dia. S.S basin, Cartor wheel 7.5 cm.Pre-treated and epoxy powder coated.( 2 years warranty ).

Steel single basin stand: ERW steel tubular pipe construction mounted on Nylon shoes. Provision for 35 cms. Dia. S.S basin, with castor 5cm. Pre-treated and epoxy powder coated.( 2 years warranty ).

O2 cylinder trolley: Suitable for Oxygen Gas cylinder. MS rubular framework fitted with two wheels, 100mm dia. Pretreated and powder coated.( 2 years warranty ).

Perforated type Back rest: (2 years warranty ).

Reinforced Moulded plastic pallets of Size: 1200x1000x125H mm Capacity-2500kg unified load (Static) of weight 13 kgs. Colour-Blue ( 3 years warranty ).

Reinforced Moulded plastic pallets of Size: 1200x800x145H mm Capacity-1500kg unified load (Static) of weight 11 kgs. Colour-Blue ( 3 years warranty ).

Patient trolley with detachable stretcher: Size: 202cm(L) x 56cm(W) x 82cm(H) with 22mm dia 16 gauge MS tubular frame work with removable 16 gauge metal sheet Stretcher with SS handle on both sides. Trolley mounted on 20cm dia double balls race swiveling castor wheels. Detachable I.V.SS rod and provision to fix at both side of the trolley. Pretreated and powder coated. Wheels preferably "Rexola".should have provision for carrying oxygencylinder at the bottom.should have side rails both sides of non collapsible hanging type, made of SS 304 can be slided along the sides. (rate quotes should include 50 numbers of spare wheels)

Computer table with three drawers: Provision for storing UPS size:120cm*75cm*75cm. 2.5mm plywood top with mica laminated with curved wooden beading all around top with pull out for keyboard and mouse.(2 years warranty)

Stainless steel dining table: .Size 1800mm x 600mm x 750mm. Top made of 19 mm plywood completely covered with 22G stainless steel sheet, built on 130mm squeare pipe of 16G with double cross bars length wise at the center with gap up 6". The top corners with curved finishing(2 years warranty)

Steel full armed S type chair: Size: 25mm ERW with nylon knitted seat and back.Over all height 88cm,Height of seat from floor 49cm,seat and back should be made up of 50mm x25mm knitted with good quality nylon wire(White).Armrest should be 38cm. Seat, back and armrest should be made of good quality wood.Seat back side with two supporting length rod.(2 years warranty).

Patient waiting chair: Three seated, stainless steel grade 304, with back rest of Size 1650mm Length integrated backrest and seat, material for support of main frame should be of MS ERW tube of thickness 1.2mm(18G) with finish of powder coated (60 Microns), made out of leg CRCA sheet and 18G or better 1" pipe with hand support for each seat ( 2 years warranty)

Desk cum chair: Frame should be fabricated by 16G or better 20mm M.S.pipe. Seat and back by 18&20 Gauge or better respectively perforated M.S. sheet 43cm x43 cm. Both sides armrests by 18G or better 3cm rectangular pipe.Bottom shelf by 31 cm x 41cm with 3mm wire mesh, the shelf at the bottom should be front openng with sides curved. Writing pad movable fornt and back by fixing 1.27cm dia M.S. rod with chromium plating of 51 cm length,writing pad size 60cm x 29cm made by 18mm plywood with

both side laminations. All metal parts should be pretreated and powder coated.(2 Years warranty).

Steel Revolving Executive low back chair with arms: With foam cushion 10 cm covered with fine quality cloth for seat and back, Steel revolving base fixed at bottom of the chair, Size: 80 cm (W) x 80 cm (D) x 85 cm (H) to 25mm Square SS tubular Frame 16G or better. armrest to be made of one piece, well rounded polyurethane that is indifferent to climatic conditions.Good quality Wheel in 3'/8 thread type.. ( 2 years warranty ).Additional spare of 10 wheels and 4 hydraulics for every 20 nos. of chairs ordered should be provided.

Moulded plastic armless chair: Approximate weight 3kg,seat size :43cm(W) x38 cm(L), Floor to seat height 43cm.Overall height 80cms."Rack outer"/inner 43cm. Colour :Marble grey/white(2 years warranty)

Moulded plastic chair with arms: Approximate weight 3.5kg,seat size :43cm(W) x38 cm(L), Floor to seat height 43cm.Overall height 80cms."Rack outer"/inner 43cm. Colour :Marble grey/white(2 years warranty)

Steel non-Revolving Executive low back chair with arms: With foam cushion 10 cm covered with fine quality cloth for seat and back, Steel cantilever base fixed at bottom of the chair, Size: 80 cm (W) x 80 cm (D) x 85 cm (H) to 25mm Square SS tubular Frame 16G or better. armrest to be made of one piece, well rounded polyurethane that is indifferent to climatic conditions.. cantilever base. ( 2 years warranty ).