REPAIR REPLACEMENT TO FLOOR FINISHED, PAVINGS, PLUMBING AND SANITARY FITTING AND CONNECTED WORKS IN THE AREA OF AGE B/R-II UNDER GE (WEST) JABALPUR

Amount

Demolition of cement concrete of any descrip-tion and in any position not otherwise specifically provided for

Demolition of reinforced cement concrete of any descrip-tion

Demolition of Stone slabs and tiles of any description or thickness in floor, aprons etc

Demolition of Brick tiles or terracing tiles, single layer on roofs

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded granite stone aggregate) as in sub base of floorings to receive top finish.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for high definition double charged fully polished digital vitrified tiles (light/dark shed) 8-10 mm thick of size 600x600 , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed..

Ditto all as per above items but as in skirting fixed on rendering 10mm thickin CM 1:4 complete etc all as specified and as directed.

M & L for ceramic coloured tiles 7 to 8 mm thick ( square area of each joint less tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and pattern as approved by engr-in-charge laid over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as specified and directed

Ditto all as per above items but as in skirting fixed over and including rendering 10mm thick in CM 1:4 etc all eomcplete.

M&L for glazed ceramic tiles(digital/highlighter concept) coloured , of 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles etc complete all as specified.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed bed 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc all as specified and directed.

Ditto all as per above item but fixed in riser of steps, skirting, dado and pillar fixed over and including cement plaster 15mm thick in CM (1:4) etc all completed .

M&L for Machine cut Cudappah stone slab flooring 20-25mm thick fixed over and including 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M & L for Granite (of any type) work 20 mm thick machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and the like fixed in cement mortar 1:4 15mm thick including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including cutting and polishing of tiles etc complete

M&L for pre-painted chemically treated PCC exterior tile of size 300x300x20 to 25 mm thick and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile laid over and including 15 mm thick screed bed in CM(1:6). Make:-M/s Mehtab tiles, Mayur tile and interlocking paver, Duracrete

M&L for 100 mm thick PCC 1:4:8 as in sub base in type D2(using 40 mm graded stone aggregate) etc all completed.

S&F Interlocking paver block of any shape and size comfirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment laid over and including 50 mm thick sand cushioning etc all complete.

M&L for 15mm thick rendering in CM (1:4) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth without using extra cement complete all as specified and directed. ( Note:- WPC will be measured and paid separately)

Supply only integral water proofing compound

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat., black ,

M&L for PCC (1:5:10) Type E2 using 40mm graded stone aggregate laid as a lean concrete etc completed all as directed and specified

M&L for PCC (1:1.5:3) type A-0 using 12.5 mm graded stone aggregate as in roof kerbs as in kerbs/cover fillet etc complete all as specified.

S&F in repairs GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as in sunken spout etc all as specified and directed

Taking down cement plaster on brick/ stone masonaryincluding raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM etc all 1:6 complete .

Ditto all as per above items but except brick

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement etc complete all specified and directed.

M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer etc complete all as specified.

M&L for Prepration of newly plastered surfaces and applying three coat of white wash on ceiling etc all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming complete all as specified new surface of walls

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good to distrubed sufrace etc all complete.

S&F in repairs PVC low level flushing cistern , white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe etc complete all as specified and directed.

S&F in repairs grating doom 100mm dia PTMT (Min weight 25 grms)

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450mm etc all complete.

S&F in repairs 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed.

Taking down and refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling,floors including required fitting etc all complete.

Taking donw and refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling,floors including required fitting etc all complete

S&F in repair, Wash down water closet vitreous china white pedestal pattern including connecting to outgoing drain pipe to flushing pipe & Seat cover etc complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand etc all complete

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. Make :- MARC/Plumber/ JAQUAR

S & F in repair chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete.

S & F in repairs chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore etc all complete.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe etc all complete

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete etc all complete

S & F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm bore pipe etc all complete.

S & F in repairs Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete.

S & Fin repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete.

S & Fin repairs Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S & Fin repairs Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repairsTowel Rail 600mm long of SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed complete.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm etc all complete

S & Fin repairs PVC cabinate with mirror etc, complete all as specified. Make : Prayag : (Size : 400 x 500 ) cat No.554 or equivalent in Polytuff, Sintex.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately)

S&F TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming

S&F in repairs 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to floor or on walls etc complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR ) branch piece,double (single Y) equal or unequal complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) branch piece,double (single Y) equal or unequal complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR ) junction,double (double T) equal or unequal complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR ) junction,double (double T) equal or unequal complete all as specified and as directed.

S&F in repairs PVC(SWR) floor trap/Nahani trap with grating 75mm dia incl jointing with solvent cement complete all as specified and directed.

S&F in repairs Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab, shelves etc.all as specified and directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

S&F in repairs 19-20 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S& F in repairs Drawer handles brass projection drop (50 mm to 65 mm on screw plate etc all complete

S&F in repairs 40 mm dia cupboard Knob s fixed with nut screw and washer of brass polished etc all complete.

M&L for grinding, cutting & polishing of existing terrazzo/kota stones floor topping with mechanical grinder to achieve granite finish and wax polishing upto the satisfaction of Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate 40 mm thick as in floor finishing cement concrete surface even & smooth w/o using extra cement etc all complete.

S&F glass dividing strips 38 mm wide, 3 mm thick inserted in position to confirm to design complete all as specified and directed.

S&Fin repairs magnetic stopper suitable for cupboard, dressing table fixed with screws complete all as specified and directed.

S&Fin repairs continious(Piano) hinges, mild steel,bright finish or electrogalanised,width of flap 30mm when open etc all complete.

KRD ASSOCIATE

ANAMIKA CONSTRUCTION

M/S A K MUKHERJEE

step up construction