Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC 422 PALLADAM ROAD TIRUPPUR 641 604 | TIRUPPUR | TAMIL NADU | 641604 | ₹1.2 Cr Quoted ₹1.0 Cr | L1 | Accepted-AOC Plus Two point three six percentage excess over than the current SoR value |
| 2 | L2₹1.1 Cr+₹4.1 L (3.90%)Rejected-AOC | ₹1.1 Cr+₹4.1 L (3.90%) | L2 | Rejected-AOC Plus Ten point one three percentage excess over than the current SoR value |
Tender Value
₹1.2 Cr
EMD Value
₹87,000
Closing Date
27 Feb 2024, 3:00 pmClosed
The Chief Engineer TWAD Board Coimbatore
The Chief Engineer TWAD Board No 30 Siruvani Nagar Bharathipark Road Coimbatore 641043
Providing Inlet pipe Connection to the Existing OHTs under CWSS to 547 Rural Habitations in Mallasamudram union Elachipalayam Union and 11 Panchayats in Paramathi union in Namakkal District
2024_TWAD_425524_1
IFB24547InletConnection
Open Tender
Civil Works
Lump-sum
180 days
Namakkal District
Refer Bid Document
3 documents required · 3 mandatory
₹0
₹87,000
Office of the Chief Engineer TWAD Board Coimbatore
6 Mar 2024
15 Feb 2024
28 Feb 2024
15 Feb 2024
27 Feb 2024
15 Feb 2024
15 Feb 2024 - 16 Feb 2024
16 Feb 2024
Amount
ProvidingInlet Pipe Connection to Existing OHTs in various sizes & staging height under CWSS to 547 Rural Habitations in Mallasamudram union, Elachipalayam Union and 11 Panchayats in Paramathi union in Namakkal District
Earthwork excavation and depositing on bank for laying of pipes, in all types of soil and strata with an initial lead of 10m and initial lift of 2m including shoring, strutting and all other incidental works etc., complete and as directed by TWAD Board Officers.
50 mm dia GI Pipe
65 mm dia GI Pipe
80 mm dia GI Pipe
Refilling the trenches with excavated earth (other than sand) in layers of 15cm thick, watered well rammed and consolidated etc. complete complying with standard specification removing and spreading the surplus earth at the places shown within 10 m distance and as directed by TWAD Board Officers.
50 mm dia GI Pipe
65 mm dia GI Pipe
80 mm dia GI Pipe
Supply and delivery of the following sizes of Galvanised mild steel tubes contilnuously welded Electrilc Resistance Welded (ERW), High Frequency Induction Welded (HFIW), Hot Furnaced welded (HFN) types screwed in both ends, conforming to IS 554/85 for pipes threading, socketted on one end and the other end protected with plastic thread protector, GI pipes conforming to IS 1239/Part-I 1990 and as amended from time to time and bearing ISI Mark. The cost of pipes should include loading, freight, transit, insurance, incidental charges, packing, transportation charges stacking at site etc., complete and as directed by the TWAD Board Officers.
50 mm dia GI Pipe for inlet
65 mm dia GI Pipe for inlet
80 mm dia GI Pipe for inlet
Supply and delivery at site of following sizes of G.M valves/ GI specials with ISI marking for jointing with GI Pipes including loading, freight unloading, stacking, insurance etc., complete and as directed by the TWAD Board Officers
GI Flangeset :-
50 mm dia GI Flangeset
65 mm dia GI Flangeset
80 mm dia GI Flangeset
GI Coupler :-
50 mm dia GI Coupler
65 mm dia GI Coupler
80 mm dia GI Coupler
GI Union :-
50 mm dia GI Union
65 mm dia GI Union
80 mm dia GI Union
GI Elbow :-
50 mm dia GI Elbow
65 mm dia GI Elbow
80 mm dia GI Elbow
G.M Gate Valve :-
50 mm dia G.M Gate valve
65 mm dia G.M Gate valve
80 mm dia G.M Gate valve
Supply and delivery for HDPE specials to the site of work including loading, freight, unloading, insurance charges stacking at site etc., complete and as directed by TWAD Board officers.
Stub End with Flange
Labour charges for lifting fixing in position in vertical plane of CI D/F pipe & specials of various sizes (both standard and non standard CI pipes and specials) for lifts including scaffolding and jointing with rubber insertion sheet with MS bolts, nuts complete for inlet, outlet, overflow and scour arrangements for Service reservoirs including testing of pipeline to the required pressure with water including cost of jointing materials such as MS bolts,nuts, M.S.washers, rubber insertion sheets etc., (materials will have to be procured under separate item by the contractor).
GI Pipes and Specials
0 to 2m height
2 to 4m height
4 to 6m height
6 to 8m height
8 to 10m height
10 to 12m height
Labour charges for cutting of GI pipes true to axis and finishing the ends neatly completed and as directed by TWAD Board officers
50 mm dia
65 mm dia
80 mm dia
Labour charges for threading of GI pipes true to axis and finishing the ends neatly completed and as directed by TWAD Board officers
50 mm dia
65 mm dia
80 mm dia
Conveyance of pipe of various type/ size of the following pipes including unloading from lorries at stock yard and stocking properly and loading into lorries at stock yard transportation charges upto 8 KM from stock yard and unloading from lorries at site/ along the alignment carefully and as directed by the TWAD Board Officers.
Upto 125 mm GI Pipe
M/s Maruthi Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .