WELCOME MAINTENANCE AND REPAIR/REPLACEMENT OF INTERNAL WIRING, SOCKET, SWITCHES SUMMER APPLIANCE, HOT WATER APPLIANCE AND OTHER MISC WORKS AT AF STN DADRI UNDER AOR OF GE (AF) FARIDABAD

Amount

M&L for preparing old decorated wall surfaces , filling of holes and cracks with putty and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but on ceilings

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with putty and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old surfaces of walls filling of holes with putty and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M & L for applying one coat of wall care putty 3mm thick on wall surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

All as per item No 06 above but on Wooden surfaces

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge.

M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed by Engineer-in-Charge.

M&L for rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge. Note:-Integral water proofing compound shall be measured and paid separately

M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces on ceilings & M & L for applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and directed by Engineer-in-Charge.

M&L for providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L for rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured plain tiles,300 x 300 x 7mm thick, conforming to Group B-IIA of IS-13712, first quality, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for first quaility Glazed ceramic tiles, 300 x 450 x 7mm thick, glossy finish, conforming to Group B-III of IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

M&Lfor cleaning & removal all scales & dirt etc, from tanks & from mouths of circulating pipe etc exc 250 but n.exc 500 ltrs capacity complete all as specified and directed by Engineer-in-Charge.

M&L for Vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with 'P' or 'S' trap, with integral foot rest, including demolition and removal of existing old pan complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with seat cover complete all as specified and directed by Engineer-in-Charge.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,flsh pipe, complete all as specified and directed by Engineer-in-Charge.

Dismantaling water tanks and removing to store exc 250 but n. exc 500 ltrs complete all as specified and directed by Engineer-in-Charge.

S&F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S & F in repair Stainless steel plate rack (bartan stand) made with 5 mm dia stainless steel rods of minimum 750mmx250mmx 750mm size complete all as specified and directed by Engineer-in-Charge.

M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in existing Concealed conduit PVC Conduit/casing and caping medium grade with all fittings (ISI Marked) controlled by one switch including 3mm thick plastic laminated sheet, complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but for one 3/5 pin socket 5 Amp on same board.

All as per item No 34 above but for one 3/5 pin socket 5 Amp on independent board .

All as per item No 34 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm

M&L for Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead drawn in and including non metallic rigid PVC conduit 15mm dia including CI/MS box of required size, CI/MS terminal junction boxes & 3mm thick plastic laminated top sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge.

All as per item No 38 above but for one 3/5 pin socket 5 Amp on same board.

All as per item No 38 above but for one 3/5 pin socket 5 Amp on independent board.

All as per item No 38 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed by Engineer-in-Charge. Note:- Cost making good disturbed surface below existing point wiring taken out vide item No 38 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring shall be deemed to be included in the unit rate quoted against these items.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.0 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 42 above but for one 3/5 pin socket 5 Amp on same board.

All as per item No 42 above but for one 3/5 pin socket 5 Amp on independent board.

All as per item No 42 above but for 3/5 pins socket outlet 15 Amps independent with 4.0 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.0 Sqmm.

S&F switch piano flush type, 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of switch piano 5 Amp any type any make from swtich board and replacement of defective with switch piano flush button in replacement single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of switch piano two way 15 A Amp any type any make from swtich board and replacement of defective with switch piano flush button single pole two way 5 amps 240 volts with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of switch piano 15 Amp any type any make from swtich board and replacement of defective with switch piano flush button in replacement single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

S&F Ding Dong door bell 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old unsv bell any type any make and replacement of defective with electric bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified and directed by Engineer-in-Charge.

S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of bell push 5 Amp any type any make from swtich board and replacement of defective with bell push flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals any type any make from ceiling, wall and replacement of defectiveceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of stepped type electronic fan regulator flush type 230 Volts any type any make from swtich board and replacement of defective with bell push flush button single pole one way 230 volts with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old Lamp Holder any type any make from ceiling, wall and replacement of defective Lamp holder insulated body with back plate for batten fittings with polycarbonate body complete all as specified and directed by Engineer-in-Charge.

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair PVC Combination Box type complete with switch & socket 5/6 Amp ,230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair PVC Combination Box type complete with switch & socket 15/16 Amp. 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair plug top of 16 Amp, 3 Pin 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair plug top of 05 Amp, 3 Pin 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair AC plug to of 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S& F in repair AC socket of 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular switch flush type, 5/6 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&Fin repair Modular switch flush type, 15/16 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular socket 3 pins combined, 5/6 Amp, flush type (multi purpose) two module ,230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular socket 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose) two module 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair modular stepped type electronic fan regulator flush type,2-way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular white cover plate with frame suitable for three module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular white cover plate with frame suitable for four module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F in repair Modular white cover plate with frame suitable for six module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old single pole and neutral sheet metal enclosure with a two pin and earth plug and socket single pole 20 Amp any type any make from wall surface and replacement of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old Skylite recess mounting,36W, LED 2'x2' luminaireany type any make from ceiling, wall and replacement of defective with Skylite recess mounting,36W, LED 2'x2' luminaire fittings with complete all as specified and directed by Engineer-in-Charge.

S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old LED tube light fittings 20W (4 feet)any type any make from ceiling, wall and replacement of defective with LED tube light fittings 20W (4 feet) fittings with complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of old LED tube light fittings 10W (2 feet)any type any make from ceiling, wall and replacement of defective with LED tube light fittings 10W (2 feet) fittings with complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED bulk head luminaire 10W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement including disconnecting and taking out of old LED bulkhead luminaire 10W decorative any type any make from ceiling, wall and replacement of defective with LED bulkhead luminaire 10W decorative fittings with complete all as specified and directed by Engineer-in-Charge.

S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.

M&L in replacement including disconnecting and taking out of oldbuilding secuity light 25 watt any type any make from ceiling, wall and replacement of defective with building secuity light 25 watt fittings with complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 4 sqmm FRLS and one single core PVC insulated multistranded unsheathed flexible copper conductor 2.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly draw in existing conduit complete all as specified and directed by Engineer-in-charge including taking down of existing unserviceable sub main wiring complete all as specified and directed by Engineer-in-Charge. Note: Two run of submain wiring of size 4 Sqm shall be measured as single run.

M&L for submain wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 6 sqmm FRLS and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly draw in existing conduit complete all as specified and directed by Engineer-in-charge including taking down of existing unserviceable sub main wiring complete all as specified and directed by Engineer-in-Charge. Note: Two run of submain wiring of size 4 Sqm shall be measured as single run.

M&L for submain wiring with 2X6 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed by Engineer-in-Charge. Note: Two run of submain wiring of size 4 Sqm shall be measured as single run.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit of suitbale size not less than 20mm dia and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed by Engineer-in-Charge.

S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's complete all as specified and directed by Engineer-in-Charge. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S&F in repairs Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB complete all as specified and directed by Engineer-in-Charge.

Supply & fix as in repair sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge.

All as per item No 93 above but 8 ways

All as per item No 93 above but 4 ways

S&F MCB TPN 63 to 100 AMPS Amps 415V incl all termnials, fitting etc including taking down complete all as specified and directed by Engineer-in-Charge.

S&F RCBOs for earth leakage,over load & short circuit protection 2 pole ,25 Amp rating, 300 mA capacity suitable for 240 Volts and including taking down existing MCB/ RCCB complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etc. including taking down complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down complete all as specified and directed by Engineer-in-Charge.

M&L for servicing,Taking down Exhaust Fan & wall mounted fans any size and any sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and connecting up complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding of exhaust fan of size 250 to 600 mm sweep Including Taking down ,dismantiling, opening ,descaling, adjustment, re fixing , cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size enamelled copper wire warnishing complete all as specified and directed by Engineer-in-Charge. Note: Spares mentioned below will be measured and paid separatelly

All as per item No 101 above but Ball bearing

All as per item No 101 above but Brass bushes

All as per item No 101 above but Exhaust fan louvers complete with nut & bolts etc.

All as per item No 101 above but Exhaust fan blade of any sweep with screws/bolts, nuts.

M&L for Taking down for servicing, Ceiling fan , Air circulator & wall mounted fans any size and any sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and connecting up complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding of Ceiling fan , Air circulator & wall mounted fans of any size any sweep and any capacity of fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position complete all as specified and directed by Engineer-in-Charge. Note: Spares mentioned below will be measured and paid separatelly

All as per item No 107 above but Ball bearing

All as per item No 107 above but Brass bushes

Supply and fixing capacitor 2.5 Mfd. in replacement of old unsv item complete all as specified and directed by Engineer-in-Charge.

Supply and fixing capacitor 3.0 Mfd. in replacement of old unsv item complete all as specified and directed by Engineer-in-Charge.

Supply and fixing capacitor 4.0 Mfd. in replacement of old unsv item complete all as specified and directed by Engineer-in-Charge.

Supply and fixing and connecting flexible copper twisted twin core of size 23/.00076 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods ,electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with complete all as specified and directed by Engineer-in-Charge,. Note:- Old fan will be deposit in MES store

S & F in replacement of exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

S & F in replacement of exhaust fans made of Steel body / MS Body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

S & F in replacement of Wall Mounted Fan (Plastic body) of size 400 mm sweep, 1300 RPM, 3 blade complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

Supply and fix Pressure booster Pump 1.5 HP with CRI Automatic pressure controller min lifting height 27 Mtr make sure that sufficient pressure reachead complete all as specified and directed by Engineer-in-Charge. Note:- Old Motor will be deposit in MES store

Supply and fix modular type gang box(3 module for one socket and one switche) suitable for 5/15amp 6pin including plate cover plastic sunken box etc including suitable size of switches and sockets complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repplacement of PVC casing capping of size upto 25mm to enclose and protect any unconcealed internal wiring of any sizing complete all as specified and directed by Engineer-in-Charge.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed by Engineer-in-Charge.

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed by Engineer-in-Charge. Note: Parts will be measured separately and paid for under ‘Supplied only’ rates

Replacement of old unserviceable and providing new heating element titanium coated of rating 1.5 Kw suitable for water heater storage type any make and type as required at site including rubber washers (ISI marked) complete all as specified and directed by Engineer-in-Charge.

All as per item No 123 above but 2.0 KW Capacity .

M&L for replacement of old unserviceable and providing new Thermostat (ISI Marked) suitable for geysers 25 Ltrs to 50 Ltrs capacity, suitable for AC 230 volt. The adjustable range from 0-90 degree Celsius complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of old unserviceable and providing new Syphon assembly of 06 holes / 09 holes (ISI Marked) made out of brass of 25/35 ltr capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed by Engineer-in-Charge.

S&F for MS Bottom cover plate with matching colour of geyser complete all as specified and directed by Engineer-in-Charge.

M & L for Replacement of old unserviceable and providing new thermal insulation material non hygroscopic, fire resistant, fiber glass wool for 25-50 ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge.

M & L for Replacement of old unserviceable and providing new non return valve made out of brass (ISI marked) for bore dia of pipe 15mm size complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of old unserviceable and providing new safety valve(ISI Marked) suitable for 25 to 50 Ltrs capacity geysers complete all as specified and directed by Engineer-in-Charge.

S&F in replacement and providing new Indicator lamp (green & red ) with Neon lamps(ISI Marked) indicating automatic working of geyser round/square type suitable for geyser capacity 25/50 ltr AC 230 volt complete all as specified and directed by Engineer-in-Charge.

M&L for eplacement old unserviceable and providing new internal glass lined /enameled/ titanium coated , 1.8 mm thick (18 gauge) steel water tank with 0.7 Mpa bar pressure, suitable for geyser 25 ltr capacity complete with rubber gasket, complete all as specified and directed by Engineer-in-Charge. Notes :- (i) The tank shall be tested at site and shall be able to withstand requisite pressure, necessary arragengments for the testing shall be made arranged by the contractor. (ii) Tank with stud type and round element shall only be provided and trianguluar element shall not be accepetable.

All as per item No 132 above bu 50 Ltrs Capacity of Geyser

M&L for replacement of old unserviceable and providing new Outer Cover body suitable for geyser of following capacity with rust proof made out of CRCA sheet (16 gauge) 1.50 mm thick electro statically powder coated stove enamelled factory made complete with fixing bracket, nuts & bolts to fixed with wall Suitable for 25 Ltrs capacity Geyser complete all as specified and directed by Engineer-in-Charge.

All as per item No 134 above but 50 Ltrs Capacity of Geyser

M&L for Brazing, welding to any size of inner shell copper/steel tank at leaking spot of any capacity any type Geyser after the repair checking up throughly for leaking including replacemnet of worned out nuts,bolt,and washer complete all as specified and directed by Engineer-in-Charge.

S&F Geyser connections pipes for hot and cold water supply made of stainless steel wire braided conntector with chrome finish heavy duty nuts of 15mm size with suitable lengh including taking down of old unserviceable pipes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of cable 3 core 4 sqmm FRLSH PVC copper conductor complete all as specified and directed by Engineer-in-Charge.

S& F plug top of 16 Amp, 3 Pin 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of old unserviceable and providing new water heater storage type ( geyser) electric , capacity 25 Ltrs BEE 5 Star rated complete all as specified and directed by Engineer-in-Charge. Note:- Old Geyser will be deposit in MES store

M & L for metal clad plug top 20 A 2 P+ E, 230 V AC as in repair complete all as specified and directed by Engineer-in-Charge.

M & L for metal clad socket 20 A 2 P+ E 230 V AC as in repair complete all as specified and directed by Engineer-in-Charge.

Supply & fix anchor bolt of size 12mm x 100mm long with washer including drilling holes for fixing anchor bolt and making good to the disturbed surface matching with specification complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with 2X4.0 SQMM+1X2.5.0SQMM Earth Wire single core PVC insulated FR sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed.

S & F in replacement of exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed by Engrr-in-charge. note:- OLD fan need to deposit in MES store no credit will be provided for the same.

S & F in replacement of Wall Mounted Fan (Plastic body) of size 400 mm sweep, 1300 RPM, 3 blade complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

Supply and fix in repair BLDC fan Energy Efficicent ceiling fan Sweep size 1200mm with speed 350 RPM motor air delivery 220 CMM input power 28W-32W and having remote control complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

S & F in replacement of exhaust fans made of Steel body / MS Body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed by Engineer-in-Charge. Note:- Old fan will be deposit in MES store

M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 16 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

36SHRI RADHEY ASSOCIATES (BID ID -3067578)

Ashish Sehgal and Co. (BID ID -3068853)

J P Enterprises (BID ID -3067731)

SAGAR ENTERPRISES (BID ID -3065568)

M/S Yamin (BID ID -3064215)

M/S Anand Enterprises (BID ID -3079282)

MAA BHAWANI CONSTRUCTION (BID ID -3075174)

Singh Associates (BID ID -3065963)