GE/ALP(8277B) KOLKATA OF 2023-24

Amount

Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles complete all as specified and directed.

Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with Cement mortar (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement to match the existing surface complete in all respect as specified and directed. Note: WPC shall be measured and paid separately

M&L for Rendering 15 mm thick in Cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface fair & even without using extra cement to match the existing surface all complete all as specified and directed.

M&L for Rendering on ceiling 5 mm thick in cement mortar (1:3) on of brick work, surface finished even and smooth with out using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete in all respect as specified and directed.

Taking down of Chowkhat with shutter (without taking of shutter) door / window area n.exc 1.5 Sqm complete all as specified and directed.

Taking down of Chowkhat with shutter (without taking of shutter) area exc 1.5 Sqm but not exc 4.0 sqm complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4) 12.5 mm graded stone aggregate as in hold fast block kerbs or mud stops, rounded or chamfered etc comlete all as specified and directed.

S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed.

S & F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per dirns of EIC.

Providing& fixing aluminium 10-15 micron powder coated louvered with series-B (18mmx40mmx1mm) thick aluminium pipe frame work, actuating bar with glass holder, locking handle 5mm fdrosted glass at top of ventilator balance portion fixed with frosted glass of same quality complete all as specified and directed.

Supply and fixing aluminium anodised Partition wall of frame size 80mm x 38mm x 3.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.

S&F 12 mm thick prelaminated particle boards (ISI marked), interior grade prelaminated both side with decorative choice lamination, fixed with necessary clips and other like to aluminium frame work, as in doors, windows, partition etc complete all as specified and as directed.

S&F 5.5 mm thick glass ordinary quality, frosted on one side fixed to aluminium frame work exc 0.5 Sq. m in each pane complete all as specified & as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing in square n exc 0.5 sq. m in each pane fixed to aluminium frame work complete all as specified & as directed.

S&F Extruded aluminium alloy handles 150 mm long, fabricated type,anodised complete all as specified and directed.

S&F wooden door pull handles Brass alloy handles 8 inch long, fabricated type,anodised complete all as specified and directed. (Make : Prayag Cat part No :PHO8W-1300-BBM or equivalent in make as specified and approved by GE.)

S&F stainless stell sliding door bolts 200mm long with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts complete all as specified and directed. (Make : Prayag Cat Part No SLD-1212 or equivalent in make as specified and approved by GE).

S&F Stainless Steel tower bolts with squre type of extruded section with 200 mm long bolt, complete all as specified and directed. (Make : Prayag Cat Part No TBS-2250 or equivalent in make as specified and approved by GE).

S&F Hinges 100 mm, cast brass, with Stainless steel hinge pin, bright polished and fixed, complete all as specified and directed. (Make : Prayag Cat Part No HG2319 or equivalent in make as specified and approved by GE).

S&F aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded & pointed in any mortar complete in all respect as specified and directed.

M&L for Reinforced cement concrete B-1 (1:2:4) (Nominal mix) using 20mm graded stone aggregate as in Slabs supported on walls complete all as specified and directed.

S & F for MS TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete in all respect as specified and directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A') Note : Size of Granite shall be decided by GE

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (40 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Dismantiling of floor hearth or wall tiles incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed.

M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but n.exceeding 0.38 sqm in toilet/bathfloor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note: Screed bed shall be measured and paid separately

M&L for glazed ceramic (coloured) tiles of size 450x350 6-7mm thick as in vertical surface/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete in all respect as specified and directed.

M&L Screed bed or bedding layer 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 40mm or 50mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking down UPVC pine 50 mm bore with fittings complete all as specified and directed.

S&F CPVC pipes 15 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 50 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified and directed.

S&F UPVC pipes 50 mm bore (Outer dia) of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed.

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

S&F 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete in all respect as specified and directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed.

S/F in repair PVC (SWR) vent cowl 110 mm dia complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete in all respect as specified and directed.

S&F in repairs vitreous China wash down water closet pan S-trap 300 mm (padestal pattern) incl PVC seat cover, (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe etc. comlete all as specified and directed. (Make : Cera Cat No. S1013222VS or equivalent in make as specified and approved by GE).

S&F Toilet paper holder of Chromium Plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs Glits table top wash hand basin, including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. (Make:- Cera cat No-S2020102PL or equivalent in make as specified and approved by GE).

S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.

S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size comlete all as specified and directed.

S & F in repairs 15 mm Dia CP Bib taps,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S & F in repairs 15 mm Dia CP stop cock(concealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S&F in repair 15 mm bore Brass CP Health faucet screwed down for iron pipe and fixed complete all as specified and directed. (Make : Prayag/Cera/Jaquar )

S&F in repairs single lever basin mixer with 450 mm braided connection pipe, complete all as specified and directed. (Make : Cera Cat part No.-F1012451 or equivalent in make as specified and approved by GE).

S&F Chromium plated Soap dish, fixed to plugs with chromium plated brass screws comlete all as specified and directed.

S & F Led mirror with touch switch (600X800mm) of 5 mm thick glass with decorative high bright LED strip, Touch switch for LED light, double coat for protection and longevity and silver plating the back for better reflection, fixed to wooden plugs with chromium plated brass| screws and cup washers complete all as specified and directed. (Make : Cera Cat No. B3530105 or equivalent in make as specified and approved by GE).

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 100mm dia complete all as specified and directed.

S&F in repair brass CP towel rail, fancy type, 60cm long between flanges complete all as specified and directed. (Make : Cera cat No-F5006103 or equivalent in make as specified and approved by GE).

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms complete all as specfied and directed. .

M&L for applying Finishing walls in new surfaces with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of 3 mm wall care puty complete all as specified and directed.

M&L for preparation of plastered and unplastered surfaces of new decorated Ceiling take two coat of acrylic oil emulsion distemper complete all as specified and directed.

M & L for Cement concrete in saucer drains Type B1 (1:2:4) (20 mm graded stone aggregate) slope maintained as per site requirement complete in all respect as specified.

M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggregate as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

Cutting into existing man hole for connecting new drains , making good to pipe and rendering ,cutting out existing benching for and forming branch channel (half round or 3/4 section ) in cement concrete (1;2:4) type B-1 (using 20 mm graded stone aggregate) smooth finished and benching as required for 225mm dia pipe complete all as specified and directed.

Cleaning of Manholes any size and depth upto 2.0mtr by means of mechanical operation/civil agencies, spades, buckets and other suitable process to clear all silt , rubbish, sludge etc and depositing all rubbish silt etc to a pit and including excavation of pit to a distance n. exc 50 mtr and finally top portion of pit to be covered by a 100 mm thick layer of excavated earth with and including spreading of bleaching powder completed all as specified and directed. Note : No separate payment shall be made for taking up cover/cover slab and refixing the same and mechanical operation/civil agencies where required or directed by Engineer-in-Charge. Cost is included in unit rate.

Cleaning of under ground sewage line upto 200 mm dia by mechanical operation/civil agencies/ rodding/by bamboo split, rope through pipe from manhole to manhole ,WC to 1st manhole /GT/Inspection chamber and having the pipe clean for easy flow of sewage line and removal of offensive material at a distance n. exc. 50 mtr, deposited the material in excavated pit including excavation and cover the pit with excavated earth, levelling of surplus excavated soil round the pit and spreadding of bleaching powder around the pit complete all as specified and directed. Note : No separate payment shall be made for mechanical operation/civil agencies where required or directed by Engineer-in-Charge. Cost is included in unit rate.

Cleaning of deposited earth, silt, debris, sludge, water from drain and removal of debris to outside or inside the premises of MoD land exc. 1.50 km but n exc. 5 km and depositing where directed by Engr-in-Charge. Complete all as specified and as directed

S&F 300mm bore salt glazed stone ware drain pipes laid in trenches and jointed including demolition of old pipes etc complete all as specfied and directed.

S&F 200mm bore salt glazed stone ware drain pipes laid in trenches and jointed including demolition of old pipes etc complete all as specfied and directed.

M&L for concrete bed in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate, to drain pipes of 300 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

M&L for concrete bed in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate, to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

M & L for 150 mm bore reinforced concrete pipes, class NP3,laid and jointed with collars complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under and haunching against sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Taking down eaves gutters and rain water pipes ,cast iron pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, reinforced concrete drain pipes etc., including cleaning or refixing or removal to Store (measured overall length as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and as directed.

M & L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate), cast in situ, in benching, coping and the like etc including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) mixed with liquid WPC @ 0.25% by the weight of cement or as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately as “Supply” only.

Supply only liquid water proofing compound (WPC) of best quality complete all as specified and as directed.

M & L for precast reinforced cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) as in cover slab, shelves and similar articles with plain faces including necessary form work and set in cement mortar (1:4) complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete in all respect as specified and directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A') Note : Size of Granite shall be decided by GE

Excavation in trenches, n exc 1.5m wide and n exc 1.5 m in depth for manholes, pier holes, cesspits etc n exc 10sqm on plan and n exc 1.5m in depth and gtting out complete all as specfied and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exc. 25 cm all types of soil etc complete all as specified and directed.

Removal excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc. complete all as specified and directed.

Removing excavated material exc 1.5 km and n. exc 5 km depositing where directed at a level n. exc 1.5 m in soil complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

Material and labour for hard core of gauge n. exe 63 mm with broken stone deposited spread and levelled in layers n. exe 15 cm thick each layer and rammed to true surface complete all as specified and directed.

Ditto as per item NO. 90 above but except bricks complete all as specified and as directed.

All as per item No 92 but on fair faces of brick work or on one side of lathing complete all as specified and directed.

Preparing new plaster surfaces of wall and applying 2 coats of cement base paint over a layer of wall care putty etc complete all as specified and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a layer of wall care putty etc complete all as specified and directed.

Material and Labour for Exterior clading wall tiles (Avg thickness 12-15mm thick) of approved size (153mm x 76mm), colour and designed set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering with cement mortar (1:4) as tree guard or wall finishing etc complete all as specified and as directed.

Material and Labour for 10mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 15mm thick rendering with cement mortar (1:4) complete all as specified and as directed.

Material and labour for Machine pressed precast concrete coloured interlocking paver block of any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 Grade complete all as specified and directed.

Material and labour 50mm thick sand filling under interlock tile flooring complete all as specified & as directed.

Material and labour for 75 mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M& L for Preparition of old plaster surfaces of wall and applying 2 coats of cement base paint over a coat including necessary working plateform complete all as specified and directed.

Supply and fix sub-main wiring through concealed conduit for main DB's to Sub DB's with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping of suitable size complete all as specified and as directed . Note :1. Two runs of 4 Sqmm and one run of 4 Sqmm cable and one run of casing caping shall measured as one length. 2. Proper Colour coding to be maintained. (Make of wire : Finolex/Havells/KEI Industries Ltd)

M&L modular metal flush box 6 module one complete all as specified and directed.

M&L modular white cover plate with frame 6 module including taking down of old one complete all as specified and directed. (Make : CRABTREE / LEGRAND/ ANCHOR)

Supplyt and fixing MCB protected power unit with 32A, 'C' series 2 pole MCB, modular type Motor Sarter 25A, Socket and plug top with indicating light combined all as specified and directed. (Make : North West/Crabtree/Roma Gold)

M&L for point wiring for one light/ bell/ fan controlled by one number complete with PVC insulated unsheathed FRLSH multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC conduit of suitable size minimum 25 mm ISI Marked complete with one run of FRLSH PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS/PVC sheet pressed sunken box not less than 1.12 mm thick on wooden wall, with 3 mm thick laminated sheet top cover ISI marked for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and directed. Note : Proper Colour code should be maintained to identify phase, neutral & earthing. (Make of wire : Finolex/Havells/KEI Industries Ltd)

All as per item No 117 here-in-before but for 3 pin 6 Amps modular socket outlet on the same board with 1.5 sqmm 1100 volt FRLSH PVC insulated stranded copper cable complete as specified and directed.

All as per item No 117 here-in-before but for 5 pin 6 Amps modular socket on the independent board with 1.5 sqmm 1100 V grade FRLSH PVC insulated stranded copper cable complete as specified and directed.

All as per item No 117 here-in-before but for one 6 pin 6/16 Amps socket on independent board with2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 11000 volts grade FRLSH and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

Supply and fixing modular switch 6 amps 230 volt single pole one way complete all as specified and directed.

Supply and fix modular socket outlet 5 pin, 6 Amps, 230 volt, 2 module complete all as specified and as directed.

Supply and fix modular socket outlet 3/3 pin, 6/16A Amps combined 2 module, 230 volt flush type complete all as specified and as directed.

Supply and fixing modular switch 16 amps 230 volt single pole one way complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing modular White/cloured cover plate with frame, 3 module complete all as specified and as directed

Supply and fixing modular White/cloured cover plate with frame, 8 module complete all as specified and as directed

Supply and fixing ceiling rose surface bakelite three terminal 65 x 50mm complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing MCB DB SPN 8 ways double door, IP43, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed. (Make : LEGRAND / L&T / ABB / SCHNEIDER)

Supply and fixing MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Make : LEGRAND / L&T / ABB / SCHNEIDER)

Supply and fixing MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. (Make : LEGRAND / L&T / ABB / SCHNEIDER)

Material and labour for circuit/sub-main wiring concealed type with two run of PVC insulated & unsheathed 1.5 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 1.5 Sqmm PVC insulated & unsheathed single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade for earth continuity conductor connected to common earth dolly, drawn through existing steel concealed conduit or PVC conduit or PVC casing caping complete all as specified and directed. Note : (i) Three runs of 1.5 Sqmm cable shall measured as one length. (Make of wire : Finolex/Havells/KEI Industries Ltd)

S&F Wall mounted fan of sweep 300mm elegently desined of round shape with pull cord control for speed and oscillation complete all as specified and directed. (Make : Crompton/Havells/Bajaj)

S&F Pedestal fan of sweep 400 mm silent operation , elegently desined of round shape, colour in white along with remote control complete all as specified and directed. (Make : Crompton/Havells/Bajaj)

Supply and fixing LED flood light of IP 66 with front toughen glass luminaries of capacity 50 watt ensuring uniform light distribution, higher spacing between lights maintenance free system complete all as specified and as directed. (Make : Havells CAT No. :- JETAADORNEFLS50WLE D757SSYMTOTG) Bajaj (CAT NO-BJFL 50W LED I) Crompton CAT No- FL-60-CDL/60)

Supply and fixing LED flood light of Ingress protection level of 66 with front toughen glass luminaries of capacity 120 watt ensuring uniform light distribution, higher spacing between lights maintenance free system complete all as specified and as directed. (Make : Havells CAT No- JETAADORNEFLS120WLE D757SSYMTOTG) Bajaj (CAT NO-PRAZE F 144L WH NB-A5 TG SD) Crompton CAT No. :- LFLN 120 CDL/60 - 120 W)

Supply and fix LED 12W warm white, water proof spot light complete all as specified and directed. (Make : Crompton/Havells/Bajaj)

Supply and fixing for PVC insulated flexible copper conductor cable 1.5 Sqmm 3 core , 1100 Volts grade conforming to IS 694 (FRLSH) complete all as specified and as directed. (Make of wire : Finolex/Havells/KEI Industries Ltd)

Supply and fixing for PVC insulated flexible copper conductor cable 1.5 Sqmm 2 core , 1100 Volts grade conforming to IS 694 (FRLSH) complete all as specified and as directed. (Make of wired : Finolex/Havells/KEI Industries Ltd)

S&F Switch socket combination 2 in 1, 3 pin, 6 Amps flush type universal complete all as specified. (Make : ANCHOR / HAVELLS/ LEGRAND/ HPL/CRABTREE)

S&F plug top 6A, 3 pin, 240V complete all as specified and directed. (Make : ANCHOR/CONA/Havells)

M&L modular metal flush box 2 module onec omplete all as specified and directed.

M&L modular white cover plate with frame 2 module complete all as specified and directed.

M&L modular white cover plate with frame 3 module complete all as specified and directed.

M&L modular metal flush box 3 module one complete all as specified and directed.

S & F modular type mini MCB 32 Amp SP C Series 3 KA white colour,

S & F modular type 32 A Motor starters white colour

S & F modular type 10/25 A 3 Pin Shuttered Socket white colour

S&F 25 A 3 pin plug top

M/S J S ENTERPRISES

NUPUR CONSTRUCTION

S C ROY AND CO

ESS PEE UDYOG

DK Contractor

R.R.ENTERPRISE

RELIABLE TRADERS AND ENGINEERS