REPAIR TO ROOF, CEILING, FLOORING JOINERY, SANITARY FITTING AND CERTAIN MISC WORKS AND WELCOME MAINTENACE AND CERTAIN REPAIR/REPLACEMENT WORKS IN OFFICERS, JCOs/OR MD ACCN UNDER AGE B/R-III, GE RANCHI

Amount

Taking down cement plaster etc on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water incl skiting and dado etc, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in CM (1:6), complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement, complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore complete all as directed at site, complete all as specified and directed.

All as per item No 8 but for 20 mm dia bore pipe.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc complete all as directed at site for 15 mm bore, complete all as specified and directed.

All as per item No 9 above but for 20 mm dia.

Refixing only steel tubing and connection in new or old position to walls, ceiling, floors etc complete all as directed at site for 15 mm bore, complete all as specified and directed.

All as per item No11 above but for 20 mm dia.

S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene, complete all as specified and directed.

M&L pillar tap of 15mm dia bore pipe, cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed in repair, complete all as specified and directed.

S&F in repair vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted, complete all as specified and directed.

S&F for PVC connection pipe of 15 mm dia and 45 cm long to WHB flushing cistern fixed in repair, complete all as specified and directed.

S&F in repair for PVC waste pipe of 32/38 mm dia and 1000 mm long to WHB, urinal and Kitchen sink, complete all as specified and directed.

Dismantalling of existing water tanks and removing to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

Dismantalling of existing water tanks and removing to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank, complete all as specified and directed.

S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed at site, complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed at site.

All as per item No 22 above but 75 mm dia.

S&F PVC (SWR) bends any radius of 110 mm dia.

S&F PVC (SWR) bends any radius of 75 mm dia .

S&F in repair 15 mm bore stop cock chromium plated, copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends to iron pipe in repair, complete all as specified and directed.

All as per item No 26 above but 20 mm dia.

S&F in repair, 15mm bore chromium plated bib taps cast copper alloy with crutch handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

M&L hold fast made out of MS flat iron.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290.Gde-E-165.

Dismantling steel window and ventilators including guard bar etc, complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stayhold fast etc complete with glazing bar dovetailed or welded, complete all as specified and directed.

All as per item No 33 above but without glazing bars.

S&F factory made steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc, complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed, complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 sqm each with shutter without taking of shutter from framed, complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing.

M&L 2nd class hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and directed.

M&L for 2nd class HW rail and style plain framed, factory made paneled shutter (two panel) with interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated for 35mm thick shutter, complete all as specified and directed.

M&L 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified as directed.

S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass. Gauze etc and all as specified in SSR and fitted to chowkats, complete all as specified and directed.

S&F in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm, complete all as specified and directed.

Hacking out old broken glass( any thickness size quality or description) from wooden frames glazed with putty or fixed with beads, complete all as specified and directed.

S&F sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane thickness of glass 3mm.thick all as directed at site, complete all as specified and directed.

All as per item No 49 above but n.exe 0.5 sqm in each 3mm figured glass, complete all as specified and directed.

S&F Hasp and staple safety type aluminium anodized hinges pin incl bolt to hinges plate 125 mm long.

S&F extruded aluminium alloy butt hinges 100mm size type B-21, complete all as specified & directed.

S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as directed at site, complete all as specified and directed.

All as per itme No 53 above but 75mm long.

S&F 150 mm long aluminium anodized barrel tower bolt extruded section.

S&F aluminium handles cast type anodize 125 mm long, complete all as specified and directed.

S&F 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt, complete all as specified and directed.

All as per item No 57 above but 100 mm long.

S&F 125 mm size of handle of mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

All as per item No 59 but 100mm long

S&F 300 mm long of bolt Mild steel sliding door bolts,plate type, stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate, complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long.

S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

M&L applying two coat of synthetic enamelled paint over one coat of pink primer on wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface, complete all as specified and directed.

M&L preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate premix, complete all as specified and directed.

Dismantling of boarding any description, fixed in any position with screws, complete all as specified and directed.

S&F in repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard, complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed at site, complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back,size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern,flush pipe and waiste pipe), complete all as specified and directed.

S&F MS 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete fixed in repair, complete all as specified and directed.

S&F in repair steel handle nickel anodized 125 mm long with joints for steel window complete all as directed at site, complete all as specified and directed.

S&F in repair steel casement stay of size 300 mm with hinged joint and two plates with studs with nickel anodized complete all as directed at site.

S&F in repair vitreous china squatting pan Orrisa pattern size of 580 x 440 mm white with 'P'or 'S' trap,front or back inlet and integral foot rest (excluding flushing cistern and flush pipe including connection to trap and to flushing pipe etc encluding making good to floor, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repair shower rose chromium plated with or without swivel joints 100 mm dia, complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level, complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base, complete all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection and path, complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate as in floors, finished concrete surface even and smooth with using extra cement, complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate without using of extra cement all as specified and directed at site, complete all as specified and directed.

S&F granite slab of 20mm thick in steps,cooking platforms,and like over 15mm thick screedbed in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Dismantling of wall or floor tilling including cement mortar bedding, complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm thick over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11sqm but n.exc 0.18 sqm in floor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over 15 mm thick screedbed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

All as per item No 87 above but in skirting ,dado etc over 10 mm thick cement plaster in CM (1:4), complete all as per specified and directed.

M&L coloured prepolished chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L sand filling under floors/hardstanding or in foundations including watering and ramming, complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-35 Grade with grey cement and pigment, complete all as specified and directed.

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160mm and including 38/40mm dia waiste pipe, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges, complete all as specified and directed.

M&L preparation of new surface on walls and applying three coats of white wash on wall, complete all as specified and directed.

M&L preparation of new surface on ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M&L repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs, complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sunken floor .average thickness 40mm and making adequate slop towards spout pipe etc, complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement in CM (1:4), complete all as specified and directed.

M&L for providing water proofing treatment to sunken slabs of toilets with standard water proofing polymeric membrane of 3 mm thick and weight not less than 3 Kg /SM with 90 micron molecular high density polythene film, sand witched between two layers of polymeric membrane laminated on both sides with 20 micron HM HDPE film over a coat of hot blown bitumen of grade 85/25 applied at the rate of 1.20 Kg/SM after priming the surface with bitumenous primer conforming to IS 784 ( @ 0.30 lts/SM) ,over lapping of membrane shall be fixed uniformly by LPG torch flames all as specified and directed as on roof surfaces, complete all as specified and directed.

M&L PCC 1:5 :10, type E-2 ,using 40 mm aggregates as in sunken slab filling, complete all as specified and directed.

S&F 32 mm dia GI spout light grade for sunken portion complete all as directed at site, complete all as specified and directed.

M&L aluminium door with Al box frame 101.6x44.5x2.0mm,aluminium glazed door shutter with two panel made of vertical style of size 85x44.5x 1.5mm and bottom, top & middle rail of size 114.30x44.5x1.5mm with locking arrangement with lock and self closing device with rebated fixing builders hard wares and fitting springs, glazing clips rubber packing for air locking handles 120mm dia pivot Al tower bolt 200mm long anodized Al snap bearing screw etc for fixing glass panes in frame shutters with rubber packing, complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F as in repair aluminium door closer hydrulically regulated, universal type suitable for door shutters upto 1000mm width, complete all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5 cm in length and thickness of metal to be welded n exc 6mm.

M&L preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and and applying one coat of acrylic distemper , white or tinted, complete all as specified and directed.

M&L preparation of old surfaces by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one or more coat of white putty on wall surfaces, complete all as specified and directed.

All as per ser item No 106 above but applying two coats acrylic distemper, complete all as specified and directed.

All as per ser item No 106 above but on ceiling.

M&L for complete removal of existing treatment of old plastered surface of wall and applying one or more coat to make the entire smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed.(Make : Birla, JK , Asian & Berger), complete all as specified and directed.

All as per ser item No 106 above but applying one coat of white wash on walls, complete all as specified and directed.

All as per item No 106 above but applying one coat of white wash on ceiling surface, complete all as specified and directed.

M&L complete removal of existing treatment and applying three coats of white wash, complete all as specified and directed.

M&L preparation of old plastered surfaces of wall and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying one or more coat to make the entire smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash, complete all as specified and directed.

M&L preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed.

All as per Ser item No 117 above but applying two coat of synthetic enamel paint white or tinted, complete all as specified and directed.

M&L preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted, complete all as specified and directed.

M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Demolition of cement concrete of any description and any position and removing the rubbish from the work site, complete all as specified and directed.

Supply only glass dividing strips, 3mm thick and 38mm wide inserted in position to conform to design.

Supply only Glass dividing strips, 3mm thick and 22mm wide inserted in position to conform to design.

M&L 50mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels of full width @ maximum 3mtr interval, finished even and fair all as specified . Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 gde and three part of sand ( all by weight), complete all as specified and directed.

M&L coloured joints free non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site, complete all as specified and directed.

M&L 450x300x7 mm thick joints free glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles, complete all as specified and directed.

S&F dark shade /double charged/ultracharged Vetrified Ceremic tiles 10mm thick (Square/Rectangular) polished , area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match over 15mm thick screed in cement mortar( 1:4) directed at site, complete all as specified and directed.

All as per Ser item No 128 but as in skirting with 10mm thick rendering in CM (1:4), complete all as specified and directed.

All as per item No 129 above but except bricks.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilatiate demolition).

M&L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in cement mortar 1:4 complete with joints to match, complete all as specified and directed.

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality glazing with oil putty in square n.exc 0.50 sqm in each pane, complete all as specified and directed.

S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares but exc 0.50 sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples, fixed as in repairs, complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples all as specified.

S&F pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc complete, size of frame 105x60mm, complete all as specified and directed.

All as per item No 141 above but size of frame 125x60mm, complete all as specified and directed.

M&L PCC type C-1 1:3:6 (20mm graded aggregate) as in filling of hollow portion of Pressed steel chowkat, complete all as specified and directed.

S&F 35 mm Factory made, Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of 35 mm thick shutters, complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton door shutters of 10 panels, factory made, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a)(larger size to be provided), complete all as specified and directed.

S&F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc, complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

M&L for welding in repairs to metal n exc 6 mm thick and length exc 2.5 cm and n.exc 5 cm, complete all as specified and directed.

Supply only Butt hinges medium weight cold rolled stainless / Mild steel 100mm size, complete all as specified and directed.

S&F extruded aluminium anodised alloy handler fabricated type size of handle 150mm.

S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section, complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm, complete all as specified and directed.

S&F continuos (Piano) hinges , miled steel, bright finish or electro galvanised of width 30mm fixed in repair, complete all as specified and directed.

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size fixed in repair, complete all as specified and directed.

S&F extruded aluminium alloy handles,febricated type,anodised of 75mm size fixed in repair, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of 75mm long fixed in repair, complete all as specified and directed.

S&F 18/19 mm thick Block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work, complete all as specified and directed.

S&F 6 mm thick teak wood lipping on block board fixed with nails, complete all as specified and directed.

S&F for stainless steel, ball bearing type,Size 14"x1.5" drawer runner for smooth functioning of drawer in all as spd complete all as specified & directed. Make : HETTICH, EBCO, GODREJ

S&F mica white colour 0.5 mm thick fixed with glue, complete all as specified and directed. Make : GREENLAM, ARCHIDPLY, ROYAL TOUCH

S&F mica brown colour 0.8 mm thick fixed with glue complete all as specified & directed. Make : GREENLAM, ARCHIDPLY, ROYAL TOUCH

S&F PVC bedding 18/19 mm width 0.8mm thick fixed with pvc edge bending tape with necessary glue, complete all as specified and directed. Make : PROPOND

S&F zero degree concealed hinge, complete all as specified and directed. . Make : ALBIHARI, EBCO.

S&F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished, complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. Make : Hindware

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fency type high presure with capstan head handle, screwed both ends for iron pipe of for unions, complete all as specified and directed. Make : Hindware

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed, complete all as specified and directed. Make : Hindware

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed. Make : Prayag

S&F chromium plated pillar tap swan nack for wash hand basin/sink of copper alloy with long shank inlets suitable for 15 mm bore connections complete all as specified and directed. CAT NO - BEA -8414 (PICASSO) Prayag and equavelent of approved make.

S&F 15mm dia CP wall mixer 3 in 1 for mixing hot and cold with L bend (provision for over head shower) screwd down for iron pipe, complete all as specified and directed. Make : PRAYAG Cat part No 8380 or equivalent of approved make)

S&F CP Sink with mixture with regular spout hot and cold arrangement long shank suitable for GI tubing, complete all as specified and directed. (Make : PRAYAG Cat part No 8355 or equivalent of approved make)

S&F 15 mm bore CP nozzle for RO connection, complete all as specified and directed. (Make : PRAYAG Cat part No 8305 or equivalent of approved make)

S&F central hole basin mixer(hot & cold), complete all as specified and directed. (Make : PRAYAG Cat part No 8350 or equivalent of approved make)

S&F 32 mm dia waste coupling PTMT (half or full threaded) (minimum wt-45 gms) fixed in repairs, complete all as specified and directed.

S&F 32 mm dia PVC waste pipe fixed in repairs, complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC bedding and connection pipes (excluding flusihing cistern but including CP brass flushing pipe) (rate also including for taking out unhygienic old WC and its removal from the site) Make : Hindware

S&F in repars vitreous china wash down water closet pan (pedestal pattern), white, complete all as specified and directed. Make : Hindware

S&F in repair chromium plated health faucet 1.00 mtr tube and hook 15mm bore with complete all accessories, complete all as specified and directed. CAT No - BEA -81 of Prayag and equavelent of approved make.

S&F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all accessories, complete all as specified and directed. CAT No - BEA -17 of Prayag and equavelent of approved make.

S&F Chromium plated toilet paper holder fixed to wall with plugs and brass chromium plated screws. CAT NO - BEA -88 of Prayag and equavelent of approved make.

S&F in repairs seat and cover (white or colour as approved) for pedestal pan and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F PVC cabinet mirror (622 x 422)mm box type in repairs, complete all as specified and directed. (Make : PRAYAG Cat part No BA -555 or equivalent of approved make)

S&F brass CP towel raiLcomplete all accessories, complete all as specified and directed. (Make : PRAYAG Cat part No BA - 30 or equivalent of approved make)

S&F Brass CP towel rack complete all accessories, complete all as specified and directed. (Make : PRAYAG Cat part No BA - 03 or equivalent of approved make)

S&F Grating doom 125/100mm dia.(Min.weight 25gms) of PTMT fixed in repair, complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC connection wih brass nut on both ends and CP Brass flush pipe, complete all as specified and directed. Make : Hindware

S&F in repair Vitreous China wash basin white flat back size 550x400 mm including waste pipe of size 32mm bars, CP waste coupling 32mm, PVC connection pipe 450mm long with a pair of brass nuts & PVC washers on MS angle iron 25x25x3mm thick brackets, complete all as specified and directed. Make : Hindware

S&F in repair half stall 345 x 320 x 560 mm complete all accessories, complete all as specified and directed. (Make : PRAYAG Cat part No - 4998 or equivalent of approved make)

S&F sinks with drainage board made of stainless steel 1.00mm thick in kitchen with plugs, washers and waste, incl bedding in cement mortar on wall incl fixing cantilever brackets and connecting union to pipe overall size 914 mm x460 mmx203mm , bowl size 405 mm x354 mmx203 mm complete all as specified and directed. (Make : PRAYAG Cat part No -1239D or equivalent of approved make)

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity.ISI Marked. Make : SINTEX

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity.ISI Marked. Make : SINTEX

S&F in repairs CP soap dish with glass complete all accessories, complete all as specified and directed. (Make : PRAYAG Cat part No BA - 15 G or equivalent of approved make) ,

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) bends/shoes only radius of 110mm dia

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door.

S&F PVC (SWR) vent cowl of 75mm dia.

S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, complete all as specified and directed.

M&L grinding and polishing with bee wax to terrazzo topping/ Kota Stone flooring, complete all as specified and directed.

M K Enterprises

india trading company

Balaji Construction And Company

M/S DILIP KUMAR

M/s Dwarika Nath Singh