PROVN OF ISOLATED MINI TRANSFORMER FOR SUB GUARD ROOM AND BOREWELL AT AFS CHABUA UNDER GE(AF) CHABUA

Amount

SCH 'A' PART-I

Supply, installation, commissioning and testing of isolation Trasformer outdoor type copper wound, air cooled enclosed complete with standard fitiings, provides overload sugre and under current protection where surge protection aginst load surges, 433/433 volts, 3 phase 4 wire on loading tapping on to vary secondary voltage within limit all as per IS of capacity 25 KVA complete all as specified and as directed.

Supply, laying, jointing and testingh of XLPE insulated armoured heavy duty electric cable with auminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 Core laid in trenches/floor or fixed on wall/pole including suitable size of brass compression cable gland, terminal lugs etc complete all as specified and directed.

SCH 'A' PART-II

Survery of ground water by any Government/Governent approved agency for identification of suitable site (Point) for location of borewell to achieve good yield and potable water complete all as specified and directed.

Drilling of trial bore hole by hydraulic rotary drilling (Reverse Circulation Method) according to IS : 2800-1991 (Part-I) as amended upto date and modified to extent of specified attached with this schedule of items of work in all kinds of soils & boulders upto 250 mm dia the cost of all consumable stores, fuel oil, soil stabillising material, arrangement & transportation of rig and other accessories of site of proposed bore and back and disposal of spoil from the site, for a depth upto 60 metres from ground level complete all as specified and directed. NOTE:- The quoted rate shall be deemed to be inclusive of the cost of drilling rig pumps, fittings etc which shall be provided by the contractor under his own arrangement for execution of the work.)

All as per item No 2.02 but for depth from 60 meters below ground level upto 90 meters depth

All as per item No 2.02 but for depth from 90 meters below ground level upto 120 meters depth

All as per item No 2.02 but for depth beyond 120 meters below ground level

Development of trial bore by reaming 525mm dia for 60m depth from ground level complete all as specified and directed.

All as per item No 2.06 but for depth from 60meters below ground level upto 90 meters depth

All as per item No 2.06 but for depth from 90 meters below ground level upto 120 meters depth

All as per item No 2.06 but for depth beyond 120 meters below ground level

Supply & installing sample box for displaying samples of strata made out of teak wood plants 25mm thick board, duly french polished out side, size of sample box 1000mm x 1000mm, required nos of samples bins 100mm x 100mm x 100mm sizes, provided with front openable glazed shutter, 25mm thick duly fitted with 2 Nos 75mm aluminium hinges and 75mm aluminium anodised hasp and staples for locking arrangement complete all as specified and directed.

Development of tube well with according to Clause 9.3 of IS-2800-1991 (Part-I) as amended upto date and specification attached with air compressor of capacity 250 PSI/1000 CUM till sand/mud free water of potable quality is obtained and to achive minimum discharging capacity of 25000 LPH all as spcifeid and directed. Note:- Compressor with accessories and fuel, pipes etc shall be arranged by the contractor).

Yield testing for the tube well by turbine pump and motor (disel driven) for minimum discharging capacity of 25000 LPH for at least continuous 8 hours uninterrupted run per day for three continuous days complete all as specified and directed. (Note : 'V' Notch and other equipment including pump set shall be arranged by the contractor at his own cost

Supply, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of 250 mm diameter (Internal), minimum wall thickness 12.5 mm conforming to IS : 12818-2010 including fittings fittings & accessories etc for all depths complete all as specified and directed.

Supply, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of 150 mm diameter (Internal), minimum wall thickness 7.5 mm conforming to IS : 12818-2010 including fittings fittings & accessories etc for all depths complete all as specified and directed.

Supplying, assembling and lowering 150 mm inner dia unplasticised PVC medium well screen (RMS) with ribs with minimum wall thickness under ribs as 7.5 mm confirming to IS : 12818-2010 including fittings & accessories etc for all depths complete all as specified and directed.

Supply and filling Pea gravel of size 3 to 6 mm for parking around the housing/assembly, slotted pipe of the bore well, complete all as specified and directed. Note:- Pea gravel shall be paid as per stack measurement carried out on site)

Supply and fixing accessories for UPVC casing pipes such as UPVC reducer, socket, UPVC end cap, UPVC well cap, centre guide complete all as specified and directed. Note:- The specifications of there items should comply with the requirements for the scope of work and shall be to the complete satisfaction of the Engineer-in-Charge)

Testing of raw and treated water for all parameters covering complete chemical and bacteriological aspect from RRL, Jorhat/DRL Tezpur or any Govt approved/recognised Lab as approved by the GE complete all as specified and directed.

Electrologing test with using suitable equitable equipments for the bore hole before sinking/lowering of pipes. Filters etc for assessing proper deliniation of water from govt recognised agency/Govt firm and report shall be submitted to Engineer-in-Charge/GE for approval complete all as specified and directed.

Supply , lowering & jointing mild steel ERW column pipeas per IS: 4270/2001 as amended upto date duly ISI marked, 100 mm dia, 3 meter long heavy grade, 6.0 mm wall thickness, flage ended complete with nuts, bolts, washers & rubber gasket including groove for cable entry system and applied with two coats of black bituminous paint (food grade) on both inside and outside surfaces of pipe after preparartion of surfaces complete all as specified and directed.

Supply and fix cast iron sluice valve, Class PN 1.6, long body type, with brass spindle, both ends flanged with holes, ISI Marked (IS 14864-2000), including carbon steel nuts, bolts & washers, rubber gaskets etc, with CI wheel, fixed to water mains, of size 100 mm bore complete all as specified and directed.

Supplying and fixing cast iron heavy duty non return valve, PN 1.6 both ends flanged conforming to IS, suitable for 100mm bore pipe (horizontal type) including carbon steel nuts, bolts ande wahsers, rubber gaskets etc complete all as specified and as directed.

Supply and fixing pressure gauge in pipe line 100 mm dia, 0 to 10 Kg/Sqmm including all necessary fittings complete all as specified and as directed.

Cutting of existing GI/Cast Iron pipe for insertion of new Tee of upto 150 mm bore including jointing materials complete all as specified and directed. NOTE : Cost of new Tee is deemed to be inclusivbe in the quoted rates).

Supply, laying, jointing and testingh of XLPE insulated armoured heavy duty electric cable with auminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 Core laid in trenches/floor or fixed on wall/pole including suitable size of brass compression cable gland, terminal lugs etc complete all as specified and directed.

Excavation in trenches n exc 1.M wide and n exc 1.5M in depth for taking out/laying CI/GI pipes and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Mtrs and depositing where directed at a level n exc 1.5 M above the starting point complete all as specified and directed

Returning filling in soft/loose soil, including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed

Material and labour for sand cushioning (dry) in trenches for protection of UG cable (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness complete all as specified and directed. NOTE : Punned thickness shall be measured for payment

Materials and labour for brick work with Sub Class 'B' bricks well burnt laid breadth wise along the length or cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and directed.

Materials and labour for 32 mm bore galvanised steel tubing light grade laid in trenches or floors/road/drain/fixed to wall, poles with suitable size clamps etc completed all as specified and directed.

Supplying lowering fixing commissioning and testing submersible pumping set in bore well, electrically driven, 415 Volts three phase AC 15 HP 11 KW having a discharge capacity of 750 litres per minute at a head of 54 metres, 10 stage delivery 100mm dia complete all as specified and as directed

M&L earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to galvanised steel earth lead Strip 32 X 6 mm by means of bolts nuts check nuts and washers of galvanished steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm 5 5 cm reinforced with 8mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8mm dia MS bar provision of funnel wire mesh 20mm bore galvanised steel tubing (Medium Grade) for watering charcoal or coke and salt in alternate layers, 40mm bore galvanised steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043:1987, complete all as specified and directed.

Supplying and laying and testing PVC insulated and sheathed flat submersible cable with stranded copper conductor of size 3 core 6 Sqmm 1100 Volts grade including lugs and fixed in submsersible pump set complete all as directed and specified

Material and labour for PCC 1:2:4 type B2 using 40mm graded aggregates as in foundation filling and mass concrete complete all as specified and directed

Materials and labour for plain cement concrete (1:2:4) type B1 (Using 20mm graded aggregate) as in coping, benching and similar items incuding necessary formwork etc complete all as specified and directed

Supply and fix mild steel framed works as joints, channels angle or tee sections, fixed independently without connecting plates conforming to FE 410-W (Gde E-250) complete all as specified and directed.

Supply and fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to FE 410-W(Gde E-250) duloy welded to MS joint or other sections complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer over new steel surfaces including preparation of surfaces complete all as specified and directed

Materials and labour for brick work with Sub Class 'B' bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:46) complete all as specified and directed

Materials and labour for rendering 10mm thick plaster with cement mortar (1:4) on fair faces of brick work or concrete surface in walls and finishing surface fair and smooth without using extra cement complete all as specified and directed.

Supply and fixing well cap suitble for 250mm dia internal dia housing pipe, made out of 8mm thick steel plate duly welded with locking arrangmene with holes for passing 10 Sqmm flat submersible cable complete all as specified and directed (NOTE : After completion of the work the cap will be used to keep the tube well closed until the pump set is installed)

Material and labour for mild steel iron clamp (two part), made out of mild steeel flat iron 65mm width x 12mm thick of approx 450mm length and reqd as of GI nuts, bolts and wahsers suitable for holding 100mm bore column pipe complete all as specified and directed.

Materials and labour for construction of brick masonry valve pit of size 900 mm x 900 mm x 900 mm (internal dimension) complete all as specified and directed.

Supply and laying galvanised iron pipe of medium grade, 100mm dia, ISI marked with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back-nuts, caps, plugs and unions etc) laying in trenches/floor/ducts and also cutting pipes, screwing, wash and for making forged bends on piping as required including wedding if necessary to connect with the existing water supply system complete all as specified and directed.

Supply and laying galvanised iron pipes, flanged type heavy grade 10mm bore, laid in trenches with including necessary jointing materials viz rubber gasket, nuts, bolts, washers, bends, sockets, flanges etc as required complete all as specified and directed. (NOTE : Flanges in pipe lines shall be provided at an interval of not exceeding 30 meters in continuous lengths).

Suppl, installation testing and commissioning of outdoor indoor type, floor mounted, totally enclosed LT panel board of size 0.90 meter x 0.70 meter x 0.40 meter with suitable compartmentalised design, dust & vermin proof suitable for 440 volts 3 phase 4 wire system made out of 2.0mm thick CRCA MS sheet and built iupon rigid frame work having front hinged doors with neoprene rubber gasket including danger plate, earthing strip point and ventilation louvers at both sides, detachable gland plate at bottom complete with suitable size of zinc/chromium plated nuts, nbolts and washers, having 04 Nos extended aluminium bus bar, for termination of incoming and outgoing cables, duly mounted on DMC/FRP insulators and fabricated in a CPRI approved factory having modern fabrication and tewsting facility which included seven (07) tank pre treatment facility comprising of de-greasing rinsing de-rusting phosphating rinsing and passivation followed by powder coated painting (thickness not less than 80 micron) with approved shade RAL 7032 and shall be with IP-43 grade protection. The panel shall be grouted with 50 x 6mm thick mild steel angle in frame and control wiring shall be with colour coded solid copper conductor 1.5 Sqmm cable for =easy identification and comprising of the following accessories :- INCOMER (i) MCCB, 4 Pole, 415 Volts, 63 Amps, breaking capacity 25 KA having thermal setting 100% and magnetic setting upto 70% - 01 No MAKE : LEGRAND Cat No 420053/ABB Cat No 1SDA050909R1/L&T Cat No SL986040000/SCHNEIDER Cat No LV51-0956)

M & L boring of holes under road, pavement, hard standing to accommodate 40mm dia to 150 mm GI pipe without damaging the existing road and getting out any type of soil and disposal of soil to a distance n exc 50 mtr from the site of work complete all as specified and directed.

S & F best quality stainless steel chain,dia of chain strip/rod is 6 mm for protection of submersible pump set complete all as specified and directed.

M/s Sashi Enterprise

M/S S. P. ENTERPRISE

M/s HALDER ENTERPRISE

M/S R G Construction

STANDARD ELECTRIC WINDERS