Annual Rate Contract for Servicing and maintenance of Fire Fighting equipment and system at NRPL Rewari

Amount

ARC for servicing & maintenance of Fire

Checking, Inspection, Servicing and Maintenance of Fire Fighting System, equipments hydrants, extinguishers of all type(DCP/CO2/Clean Agent), Water monitor up to the mark as per OISD/ISI Standards to provide & best functioning of the equipments always in best healthy condition inclusive of periodically cleaning, checking /inspection/oiling/ greasing of assemblies such as coupling, nozzles, valves, hydrants, extinguishers, hose pipes, water monitor, compounds drums, nozzles foam bunch, hose boxes, sand buckets etc, updating the data & identification tags, recording the status of checking in history register etc. as directed by the engineers in charge with all labors, carriages, materials etc. complete inclusive of all taxes. (inspection and servicing of the equipment/Fire Fighting facilities is to be done periodically as mentioned against each):-

Fire Hydrants (double headed) on Monthly Basis

Fire Extinguishers of all types & capacities on Monthly Basis

Hose Boxes - Monthly Basis

Valves of Fire line of all sizes including Contractor supplied grease of suitable quality on Monthly Basis.

Foam /Water Monitors on Monthly Basis

Sand buckets with stands with all bucket on Monthly Basis

Taking delivery and refilling the extinguishers of various sizes /capabilities including supply of dry chemical powder, CO2 gas etc updating the data & identification tags, recording the status of checking in history register etc as per ISI standard and replacing the same as directed by Engineer-in-Charge (The rates are inclusive of all Taxers). (The CO2 cylinder may to be taken out and delivered back within 10 days after re-filling /repairing. However Fire extinguishers CO2 are to be supplied /Kept temporary in place of each fire extinguisher for which taking out for re-filling /repairing is required).

Dry Chemical Powder

0.2 kg DCP Cartridge

2 kg CO2 Cylinder

4.5 kg CO2 Cylinder

6.8 kg CO2 Cylinder

Supply and replacing the spares /assembles etc of the Fire Fighting equipments system for all sizes / Capacities as per ISI standard and approved make with all labours, materials, carriages, inclusive of all taxes etc. complete

Hydrants Sheet Washer/Rubber including fitting at site.

Hydrants coupling washer

Rubber washer for Extinguisher

CO2 Safety valves 155kgf/cm2

CO2 Safety pins

ISI marked Discharge Pipe with horn for 6.5 Kg and 6.8Kg CO2 Exitinguishers.

Rubber Gasket OF DCP Main Cap

Hose Plunger Set & Nut.

Hose Spring & nut

DCP main Cap (gun metal) CP

DCP Plunger Pin with Spring

DCP Plunger top

Squeezing grip (Plastic) nozzle

Replacement of fire hose box glass (front)

DCP cylinder discharge pipe of sufficient length for 10 Kg capacity Fire Extinguisher

DCP cylinder discharge pipe of sufficient length for 75 Kg capacity Fire Extinguisher

"Supply and painting with two coats synthetic enamel paint ( Asian/Burger) fire paint including scrapping, cleaning, applying one coat of red oxide primer cost of all labours, materials, carriage, taxes, letter/number writing, identification marks etc. complete in all respect. "

Brush painting of fire hose boxes ( Inside and out side) including stand with two coat of Paint including letter/number writing ( Colour to be specified by EIC)

Spray/Brush painting of fire bucket stand with its bucket (4-6 Bucket)including letter/number writing.

Spray painiting of Fire extinguishers of all sizes including letter/number writing.

Spray/brush painting of Foam/water monitors/Double hydrant valves along with its stand post including letter/number writing.

Fire Siren including letter/number writing.

OTHERS

PPE maintenance / up-keeping / cleaning on Monthly Basis of various items like helmets, Breathing apparatus, Water jel blanket, Asbestos blanket,hand gloves (rubber / asbestos),first-aid box,stretcher ,resuscicator,safety belt,ear-muffs, fire proximity suits, safety torch ,safety goggles including the cost of labour, material and taxes etc. complete as per instruction of Engineer-in-Charge.

Cleaning & stacking properly the foam containers,updating stock ,date of expiry,date of manufacturing on board and in register,placing foam containers at the foam monitors and water hydrants.

Air filling in cylinders of Breathing Apparatus inclusive of all taxes.

Hydraulic testing of CO2 Cylinders inclusive of all taxes ( 2 to 4.5 Kg/Cm2)

Hydraulic testing of Clean Agent Cylinders ( 2 to 4.5 Kg/Cm2)

Hydraulic testing of CO2 Cylinders ( 6.8Kg/Cm2)

Hydraulic testing of DCP Cylinders of all sizes

Hydraulic testing of Breathing Appratus Set

Supply and fixing of wind socks on the position including all labour, tolls and tackels as per direction of Engineer-in-Charge

Supply & pasting of slips on the extinguishers showing how to use the extinguishers & date wise maintenance records of Fire Extingusher. The good quality of adehsive to be used on slips for sticking on the extinguishers inclusive of all taxes as per direction of Engineer-in-Charge.

Patch work welding on the Firefighting/Foam Line in case of leakage including all manpower & materials with tools and tackels with materials required as per satisfaction of the Engieer-In-Charge upto 12"x12" size

Supply and fixing of small hammers with chains for Hose Boxes asper direction of Engineer-in-Charge

Supply of 200 gm CO2 cartridges

Northern Engineering

COSMOS SYSTEMS