Tender ID

CPPP

Technical Eval

Works

Civil Works

Repair and maintenance of main Gate near GOs mess at Narayanpur Campus under SHQ BSF Malda

DG,BSF,MHA

12 BN BSF Narayanpur | Maldah, West Bengal

Amount: ₹2.0 LCloses: 23 Apr 2026Closed

Timeline

Published17 Apr 2026
Closed23 Apr 2026
Technical Evaluation7 May 2026
Award—

Bids

3 Bids7 May 2026

#	Company	Status
1	PRABHAT CHAKRABORTY Accepted-Technical	Accepted-Technical ok
2	SIMANTA SAGAR CONSTRUCTION CO. Accepted-Technical	Accepted-Technical ok
3	SUMAN JHA Accepted-Technical	Accepted-Technical ok

Tender Value

₹2.0 L

EMD Value

₹4,008

Closing Date

23 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Assistant Commandant(Works)

Address

Assistant Commandant(Works), SHQ BSF Malda, Narayanpur, West Bengal

Work Description

As per BoQ

Tender Information

Tender ID

2026_BSF_905699_1

Reference Number

59/BSF/SHQ-MLD/Engg/2025-26

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

12 BN BSF Narayanpur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredScan copy of Enlistment in CPWD and non CPWD contractors (i.e. MES, P T (BSNL) and Railways) (.pdf)

RequiredScan Copy of original Earnest Money Deposit (drawn in favour of DIG SHQ BSF Malda) (.pdf)

RequiredScan copy of receipt deposition of original Earnest Money Deposit (EMD) as per NIT (.pdf)

RequiredScan copy of PAN Card (.pdf)

RequiredScan Copy of GST Registration Certificate (.pdf)

RequiredScan copy of EPF ESIC registration Certificate (.pdf)

RequiredContact details of the contractor in his letterhead mentioning details (i) Mailing address (ii) Mob (.pdf)

RequiredWork Experience certificate issued by an authority not below the rank of EE (as per NIT) (.pdf)

RequiredScan copy of an affidavit (Rs.100) as under (as per Para 1.2.2 of SOP for CPWD Works Manual 2024) (.pdf)

Finance

RequiredBoQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹4,008

Important Dates

Last Activity

7 May 2026

Published

17 Apr 2026

Bid Opening

24 Apr 2026

Download Starts

17 Apr 2026

Download Ends

23 Apr 2026

Submission Starts

17 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
3Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
4Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
5Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
5.1	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	-	Kg	-	-
6Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
7	Total	-	each	1	-
8	Modified Estimate Cost after using correction factor on DSR 2023 on account of GST @0.973 X 176016	-	each	1	-
9Add Cost Index @ 17% on SR&DR 171264

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.12 MB

Work Item Documents

BOQ_951981.xls

BOQ • 0.39 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PRABHAT CHAKRABORTY

Accepted-Technical

SIMANTA SAGAR CONSTRUCTION CO.

Accepted-Technical

SUMAN JHA

Accepted-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
3Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
4Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
5Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
5.1	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	-	Kg	-	-
6Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
7	Total	-	each	1	-
8	Modified Estimate Cost after using correction factor on DSR 2023 on account of GST @0.973 X 176016	-	each	1	-
9Add Cost Index @ 17% on SR&DR 171264

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

3Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

4Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

5Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

5.1

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

6Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Total

each

Modified Estimate Cost after using correction factor on DSR 2023 on account of GST @0.973 X 176016

each

9Add Cost Index @ 17% on SR&DR 171264