Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC VIVEKANANDA PALLY NEAR MARUTI TEA FACTORY P O BAGDGORA DIST DARJEELING | DARJEELING | WEST BENGAL | 734001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹46.6 L+₹1.1 L (2.35%)Rejected-Finance GADADHAR PALLY PO PS BAGDOGRA DIST DARJEELING WEST BENGAL PIN 734014 | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹47.3 L+₹1.7 L (3.77%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹47.4 L+₹1.8 L (3.93%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹47.8 L+₹2.2 L (4.93%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
22 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bagdogra
GE AF Bagdogra Bagdogra Airport PO, Dist Darjeeling, WB - 734421
ADDN/ ALTN TO CERTAIN WATER SUPPLY INSTALLATIONS AND ALLIED WORKS AT AFS BAGDOGRA UNDER GE (AF) BAGDOGRA
2024_MES_648876_1
8547/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Bagdogra
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bagdogra
₹87,000
Yes
22 May 2024
1 Apr 2024
23 Apr 2024
1 Apr 2024
22 Apr 2024
15 Apr 2024
Amount
Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed.
S&F in repair 20mm bore gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for 15mm bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.
M&L for 20mm bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.
Dismantling of existing water tank of steel/PVC/AC of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed.
S&F in repair, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.
M&L in repair, 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L in repair, 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L in repair, 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L in repair, 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L in repair, 50 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 kg/cm2 laid in trenches or in floors complete all as specified and directed.
S&F in repair, PVC (SWR) vent cowl ,110mm bore complete all as specified and directed.
S&F in repair, 110 mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F in repair, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F in repair, PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed.
S&F in repair, PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed.
S&F in repair, PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete, (1:2:4), type B-1 complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for non-skid coloured ceramic floor tiles of size exc. 0.11 sqm but n.exc.0.18 sqm each 7 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
M&L for colour glazed ceramic wall tiles of size 450x300x7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall, cement screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for machine cut kota stone slab, flooring 18-20 mm thick over cement screed based, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified including rubbing and polish complete all as specified and directed.
M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed including rubbing and polish complete all as specified and directed.
Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub work with sub class 'B' brick straight or curved on plain exc 6m mean radius build in CM 1:6 complete all as specified and directed.
Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering cement mortar (1:3) on ceiling, chajja or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified.
M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces on wall applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered cement concrete surfaces on ceiling of roof of buildings and applying three coats of white wash on roof ceiling etc complete all as specified and directed.
M&L for preparation of external surfaces walls of buildings and preparation of newly plastered external surface & applying two coats of cement based paint over one coat of alkali resistant primer on wall/chajja complete all as specified and directed.
Taking down chowkhat or frame with shutters without taking off shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed.
Taking down chowkhat or frame with shutters without taking off shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed.
M&L for pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete size of frame 105mm x 60mm complete all as specified and directed.
M&L for pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete size of frame 125mm x 60mm complete all as specified and directed.
M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be fixed to the wall using 100mm long or suitable size MS screws including make good surface to match existing surface, complete all as specified and directed.
M&L for factory made 35mm thick flush shutters, solid core construction with block board core and plywood face panel commercial type on both faces complete all as specified and directed.
M&L for 35mm thick second class hardwood factory made plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L for 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.
M&L for factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing as specified.
M&L for Powder coated aluminium sliding window shutters 25mm thick with frames (consisting of two nos glazed shutters and one no gauze shutter) 3 track sliding shutters, duly fitted with neoprene beading glazing clip, locking device, heat absorbing glass 5 mm nominal thickness in glazed shutters, stainless steel wiremesh of 0.254mm nominal dia of wire and 0.95mm average width of aperture in gauzed shutter complete all as specified and as directed.
M&L for fabricated powder coated anodized aluminium grill of size 75x75 mm, using 6mm dia bars fixed to outer portion of chowkhat using U/V section runners complete all as specified and directed.
M&L for Powder coated (thickness of powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type, B-21, 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.
M&L for Powder coated (thickness of powder coating not less than 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F 100 mm butt hinges, medium weight, cold rolled, stainless steel and fixed complete all as specified and directed.
S&F 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 200 mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples complete all as specified and directed.
M&L for 25mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer one face, fixed with screw to timber or steel frame work complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.
M&L for 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.
S&F 75 mm hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
M&L for one side frosted glass, 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old decorated plastered/ unplastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and directed.
M&L for complete removal of existing treatment of surfaces to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint on wall/ chajjas surfaces complete all as specified and directed.
Demolition of cement concrete of any description and in any position etc complete all as specified and directed.
M&L for PCC, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and directed.
Demolition of (Un reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 75mm thick PCC, (1:3:6), type C-2 (Using 40mm graded stone aggregate) as in plinth protection, laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.
M&L for 75 mm thick PCC, (1:4:8), type D2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.
M&L chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F in repair, PVC white low level flushing cistern 10 ltr capacity with all fittings, syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.
S&F in repair, vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with & including 32 mm dia PVC waste pipe with connector including cutting for and pinning in ends of brackets complete all as specified and directed.
S&F in repair, vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with 'P' or 'S' trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & directed.
S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.
S&F in repair, 15 mm bore chromium plated fancy type long body bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Removing existing water proofing/black top treatment including concrete padding, plastering roughening of concrete surfaces, cleaning and washing down the surfaces with water and removing debris/rubbish materials outside MOD land complete all as specified and directed.
M&L for PCC, 1:2:4, type B-1 (using 20 mm graded stone aggregate) rough finished as in levelling course on roof complete all as specified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete all as specified and directed.
M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and fair without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed. Notes : WPC shall be measured and paid separately.
M&L for 3mm thick APP modified prefabricated membrane weight not less than 3.0 Kg/Sqm water proof membrane reinforced with non-woven polyester (wt. not less than 150 gms/sqm) land on primed surface by forced water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as specified and directed.
S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair, 15mm bore fancy type chromium plated with long shank and cup (concealed type) stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.
S&F in repair, PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed.
S&F in repair, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S&F in repair, CP towel rail, 600mm long, "D" type, 20mm dia complete all as specified and directed.
External Water Supply Excavation in trenches in soft / loose soil n.exc 1.5 mtr wide n.exc 1.5 mtr deep getting out soil complete all as specified and directed.
Returning, filling in including spreading, levelling and well ramming in layers n.exc 25 cm thick in a layers complete all as specified and directed.
Removing excavated material (Soil) n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed.
M&L for cement concrete, 1:3:6, type C2 (using 40 mm graded stone aggregate) for making good to disturbed surface of road etc. all as specified and directed.
Taking up CI 150 mm water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Taking up CI 100 mm water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
Material and laying/ fixing in repair, 160 mm bore GI pipe into polypropylene random pipe (PP-R) PN 16 in three layer incl fixing of all fittings made out of PP–R as required for fixing all fittings in trenches complete all as specified and directed. Make – SFMC/PRINCE/RELIANCE/SAVOIR-FAIR.
All as per item No 94.00 above, but 110 mm bore complete.
All as per item No 94.00 here-in-before, but 90 mm bore complete.
All as per item No 94.00 here-in-before, but 63 mm bore complete.
S&F in repair, gun metal gate valve with PP-R gate valves of size 63 mm (brass insert) as per requirement of the site all as specified and directed.
M&L for construction of valve pit of size 90x 90 x 90 cm (Internal dimension) incl necessary earth work and MS sheet 2 mm thick cover with angle iron frame 40 x 40 x 6mm including dismantling of valve pit with cover all as specified and directed.
Taking down old unserviceable sluice valve from existing position and supply and fixing cast iron sluice valve brass spindle long body conforming to IS-14846 clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete all as specified for 200 mm bore pipe.
All as per item No 100.00 above, but 150 mm bore complete.
All as per item No 100.00 here-in-before, but 100 mm bore complete.
All as per item No 100.00 here-in-before, but 80 mm bore complete.
M&L for cast iron bend (any type, radius and angle) size 200 to 300 mm bore, tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, "Y" junction, double branch, cross (flange sockets or socket and spigot) collars, caps and plugs all complete all as specified and directed.
S&F air release valve double action chamber to conforming IS-14845 of size 50 mm bore complete all as specified and directed.
Taking down old unserviceable non return valve from existing position and supply and fixing cast iron non return valve conforming to IS-5312, PN-1.6 including necessary joints by means of bolts, nuts washers and rubber gaskets complete all as specified for 100 mm bore of pipe.
M&L for taking out existing filter media like sand, gravel & ferminex from filtration plant of capacity 10,000 gallon per hour including soda & Alum Pots & removing from site and cleaning the internal surfaces of filtration plant with soda & Alum Pots with using PVC/Steel wire brushes to remove all scales, iron particles and finally clay & other foreign particles with clean water complete all as specified and as directed.
Taking out existing unserviceable PVC nozzle and supply and fixing new PVC double deck type PP strainer nozzle of size 10mm to 15mm (3/8” to ½” inch) dia, push type complete all as specified and directed. Make: RMCO/ASHFORD or equivalent.
M&L for preparation of old painted internal steel surfaces of filtration plant shell and painting with one coat of black bituminous paint suitable for drinking purpose of area exceeding 10 cm in width or girth not otherwise described complete all as specified and directed.
M&L for preparation of old painted external surface of Filtration Plant shell and painting with first quality of synthetic enamel (grey shade) paint exceeding 10 cm in width or girth not otherwise described complete all as specified and directed.
M&L for packing of Gravel of size 12 mm to 25 mm of new filter media in layers of approved quality obtained from ‘Barakar River’ complete all as specified and directed.
All as per item No. 111.00 above, but Gravel of size 6 mm to 12 mm complete all as specified and directed.
All as per item No. 111.00 here-in-before, but Gravel of size 3 mm to 5 mm complete all as specified and directed.
All as per item No. 111.00 here-in-before, but Sand of size 16/30 mesh complete all as specified and directed.
M&L for packing of chemical of ‘Feriminex’(MNO2) catalytic agent of size 1/16”x1/32 inches in layers complete all as specified and directed.
S&F in repair of unserviceable water pressure gauge with new pressure gauge capacity 7 kg/sqcm to 10 kg/sqcm complete all as specified and directed. Make : RMCO/OASIS.
Taking out old unserviceable rubber gasket from position with taking out of nuts, bolts etc and S&F new rubber gasket of size 75cm outer dia, 3mm thick rubber sheet of approved quality fixed with suitable size & dia mild steel machine made nuts, bolts & washers of required size & numbers complete all as specified and directed. Note : Nuts, bolts & washers shall be measured & paid separately under relevant item here-in-before.
All as per item No. 117.00 above, but of size 45cm outer dia.
M&L for mild steel machine made nuts, bolts & washers of size 15mm (5/8”) dia and 75mm (3”) long or nearest suitable sizes for top cover and side cover of Soda /Alum pot complete all as specified and directed.
Taking down old unserviceable Butterfly valve from existing position and supply and fixing Butterfly valve PN 1.6 with SG iron Disc lever conforming to IS-14846 clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete all as specified for 100 mm bore pipe.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.
UNISON CONSTRUCTION
RAMKRISHNA NARAYAN ROY & CO
M/S BENGAL ENGINEERING ENTERPRISES
NAYAK BROTHERS
SHRI P P SHARMA
NIRANJAN SARKAR
BUILDERS ASSOCIATE
M/S MANAS MITRA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .