Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹88.8 L+₹3.1 L (3.58%)Rejected-Finance INDEX NO B 28 ADG NEI GUWAHATI LEIMAKHONG BAZAR PO MANTRIPUKHRI DIST KANGPOKPI PIN 795002 MANIPUR | KANGPOKPI | KANGPOKPI | MANIPUR | 795002 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹93.9 L+₹8.2 L (9.51%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹95.7 L+₹10.0 L (11.6%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹92 L
EMD Value
₹1.6 L
Closing Date
30 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPL REPAIR REPLACEMENT OF HT CABLE AND ALLIED WORKS FROM 11 KV MRS TO CAPT QTR AND KLP PUMP HOUSE TO R AND R AT LEIMAKHONG MILITARY STATION
2024_MES_643899_1
8897/E8
Open Tender
Civil Works
Item Rate
180 days
Leimakhong
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 869 EWS
₹1.6 L
Yes
4 May 2024
23 Feb 2024
6 Apr 2024
23 Feb 2024
30 Mar 2024
16 Mar 2024
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles,cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed.
All as per item No 01 above but depth exc 1.5m but n.exc 3m complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to 18 cm thickness complete all as specified and as directed. Note:-(Punned thickness shall be measured)
Supply and laying unreinforced precasted concrete cable cover class HVP type 1 with peak size 300mm x 180mm x 40mm in trenches for protection of UG cable with width equal to length of PCC cover, laid dry and flat complete all as specified and as directed.
Dismantling of existing unserviceable/undersize ACSR conductor (of any size) , jumper from overhead line, removing unserviceable materials from site of work complete all as specified and as directed.
Materials and labour for Aluminum conductor steel reinforced (ACSR) conductor as in overhead electric line and stretching the same with required span, standard sag and binding the conductor with pin/shackle and disc insulator and jumpers with aluminum binding wire not less than 2.00mm dia, PG clamp etc complete all as specified and as directed.
Supply, laying, connecting and testing XLPE insulated (Earthed) cable in trenches / or fixed on pole etc in screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with stranded alluminium conductor, 11000 volts grade, cross sectional area 95 Sqmm, 3 core, Confirming to IS-7098 (Part-II) 1985 including taking down of existing unserviceable XLPE cable alongwith jointing kits complete all as specified and as directed. (Note :- Earth work, PCC cable protection cover, sand cushioning and GI Pipe will be measured and paid separately under respective items.
Material and labour for HT 11 KV (Earthed) grade heat shrinkable end termination jointing kit outdoor type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.
Material and labour for HT 11 KV (Earthed) grade heat shrinkable end termination jointing kit indoor type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.
Material and labour for HT 11 KV (Earthed) grade heat shrinkable straight through jointing kit complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.
Dismantling old unservicable RCC/steel tubular poles/struts, any size including breaking up PCC foundation and removal of rubbish complete all as specified and as directed.
Supply and fixing steel tubular swaged pole, type 410 SP 55 (Overall length 11.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer, including painting of black & white alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint, numbering of poles complete all as specified and as directed. (Note: Excavation and earth work and PCC shall be measured and paid separately under respective items)Design / drawing of HT pole showing the layout and dimension is to be obtained from OEM/auth dealer/supplier and same is to be got approved from GE before placing order to the manufacturer.
Dismantling of old rusted Cross Arms bracing support, clamps and back plate of any sections from poles setting aside complete all as specified and as directed.
Material and labour for Cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and as directed.
Taking out existing old lightening arrestor HT 11 KV any size and any capacity complete all as specified and as directed.
Material and labour for HT lightening arrestor with mountings accessories complete fixed on cross arms of two pole/Four pole structure/GI flat strip and connect with same size of ACSR conductor with all fittings connected to earth strip with nut, bolt, washer transmission class having discharge capacity of 65 kilo Amps and suitable for 11000 Volts expulsion type complete all as specified and directed.
Material and labour earthing complete with galvanised earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.50 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, GI strip of size 32x6mm to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 40mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:1.5:3) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) and all as shown in Electrical Plate No. 3 of SSR (Part-1)of 2009. Including taking down of existing unserviceable earthing complete all as specified. (Note:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 20mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing wire from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Supply and fixing triple pole mechanically operated air break switch (GOD), vertical mounting, rotating type, mounted on insulator and steel frame with operating mechanism worked from ground level complete in all respect such as gun metal moving contacts and spring loaded gun metal fixed jaws, knife copper jumper strip etc, suitable for 11000 Volts grade, 50 Hz with 9 insulator of rating upto 400 Amps including taking down of existing unserviceable GOD of any type complete all as specified and as directed
Material and labour for GI pipe light grade 80mm bore dia with all fittings to be laid in trenches or in floors, complete including taking down unserviceable pipe complete all as specified and as directed.
Materials and labour for Cutting hard standing/road not exceeding n exc 40cm width and n exc 90cm in depth for laying and removal of UG cable/protection pipe including making good so as to match with the existing finishes including 100mm thick PCC (1:2:4) type B1, using 20mm graded coarse aggregate on top and removal of debris and making the damaged areas uniform to the sorroundings complete all as specified and directed .
Material and labour precast cable route indicator of size 100 x 30 x 10 cm by using PCC 1:2:4, type B1, 20mm graded aggregate for cable indicator and engraving as HT cable 11 KV, 95 sqmm, 3 core slightly round from one side including red painting with two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Dismantling of insulator of any type any size from existing poles, after opening nuts,bolts and removing from site complete all as specified and as directed.
Supply and fixing pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindal two galvanised iron washer and one galvanised iron nut 150mm high x 150mm dia for 11KV volt grade complete all as specified and as directed.
Supply and fixing disc type insulator porcelain vitreous 145mm high and 255 mm dia ball and socket type white brown or green single disc assembly with tension clamps or conductor for working pressure of 11KV complete all as specified and as directed.
Supply and fixing expulsion fuse single pole suitable for working voltage 11KV of rating 25 to 50 Amps complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Materials and labour for providing cement concrete Type B1 1:2:4 ( 20 mm graded aggregate) as in coping of poles including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified and as directed.
M/S YAIPHABA ENTERPRISES
PERFECT BUILDERS AND SUPPLIERS
NAGALAND AGENCIES CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .