ETN0-42/EDC-MT/2024-2025

Amount

Carriage of following material from store center Meerut to site of work including loading & unloading at both ends maximum distance up to 40 Km. :-

STP Pole 11 Mtr. Long.

PCC Pole 8.5 Mtr Long.

ACSR Weasal Conductor

11 KV Pin Insulator

11 KV Disc Insulator

LT AB Cable 3x95+1x70+1x16 sq.mm

Earthing Road.

250 KVA T/F 11/0.4 KV

Stay set complete

Stone pad

11 KV fuse set

MS Angle 65x65x6 sq.mm

Top Channel

Dropper channel

T-off channel

LT XLPE lead 1x240 sq.mm

11 KV TPMO

GI wire 6 Swg

3 Phase Distribution box

LT XLPE cable 1x240 sq.mm

Erection of ST Pole 11 mrt long/PCC pole 8.5 Mtr long after digging a pit of size 1.6 mtr deep in all type of Soil including grouting (1:4:8) back filling of the pole with proper ramming after completion of work.

Erection of Double pole on PCC pole 8.5 mtr long after digging a pit of size 1.20 x0.60 x1.6 mtr deep in all type of Soil for each pole including grouting (1:4:8) back filling of the pole with proper ramming after completion of work.

Laying, lifting of LT AB Cable 3x95+1x70+1x16 sq.mm

Laying, lifting of ACSR Weasal Conductor.

Fixing of LT XLPE lead/cable 1x240 sq.mm

Fixing of Stone pad

Fixing of 11 KV fuse set

Fixing of MS Angle 65x65x6 sq.mm

Fixing of Top channel.

Fixing of Dropper channel.

Fixing of T-off channel

Fixing of 11 KV Pin Insulator

Fixing of 11 KV Disc Insulator.

Fixing of GI wire 6 SWG.

Fixing of 11 KV TPMO

Fixing of 3 phase Distribution box.

Fixing of Stay rod complete after digging a pit of size 1.6 mtr deep and grouting the same in block of size 0.60x0.60x0.30 mtr and nuzzling at the both ends filling the pit with excavated earth soil with proper ramming.

Fixing of MS Earthing of each 11 KV line and pole after drive of electrodes if size 20mm x250mm and connection the earthing point with GI wire

Providing and fixing of MS Nut and Bolts

Providing and fixing of clamp with nut and bolts

Providing and fixing 2" dia GI pipe upto 80 feet Water level earthing 250 KVA T/F (Neutral and body)

Making of New 250 KVA T/F Plinth of size 6'x6'x3' (feet)

New Wiremesh fencing of 250 KVA T/F

Providing and fixing of Suspension clamp with j hook.

Providing and fixing of Dead and clamp.

Providing and fixing of Piercing clamp.

Providing and fixing of 11 KV Tailess unit.

Providing and fixing of crimping lugs for 250 KVA T/F

Hi-tech power transmission (BID ID -4750138)