Supply Hydraulic jack based cow catcher at Jhunjhunu Municipal council Jhunjhunu

MAIN CAGE Main cage is to be fabricated on the chassis 6x3 inch. The cage should have minimum haight of 7' from the floor. SIDES The outer face of frame has to be covered with M.S sheet of 2.00 mm thick up to a height of 1200 mm. Rest part of the frame is to be provided by 25x25x2.0 mm thick wire mesh. Bottom frame made of suitable sized sections covered with 2 mm thick M.S plates, The M.S plate shall be further covered with boiling water proof, acid proof, chequered wooden sheets of 15 mm minimum thickness. The floor of cage should have anti slippery action when caused by animal urine and dung. Hooks and rings are to be provided and welded in the cage for tieing up the animals. A suitable size full height channel gate is to be provided at thr rear end of the cage (15" inside the rear end) to keep the already trapped animals inside the cage, while loading another. PLATFORM Auto tilting mechanism is to be provided as ground level capable of creating a slope as and when required. The detachable/collapsible frames over the platform should be fabricated with suitable size stainless round pipes. One/two single acting lift cylinder and one/two tilt cylinder with spring assisted platform opening to be provided. Complete solid arm structure with double torsion bars cross the lift arms for maximum platform stability. Hydraulic system is to be provided to operate the platform having the following specification: Load lifting capacity - 1000 kg. Lowering time - max. 60 seconds Lifting time - max. 60 second All hydraulic pressure hoses, nipples,joints, control valves etc should be of reputed make. The cage should be fabricated on the platform so as it can be closed immediately manually as soon as animal is loaded on this platform widout ant extra efforts. The operating lever is to be installed on the rear side of the cage. SIZE 12X6X7 TYRE 7.50X16 PR (2 NOS) OTHER ITEMS One ISI brand chain pulley block of 1 tonne capacity with high tensile chain 6 meter long having a hook another side to be hang on the top section of frame being the cabin. PAINTING / FINISHING Both exterior and interior of the cage will be sand shot blasted prior to spray painting. The cage shall be spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint complete with the name of the purchaser.