PROVN OF TWO WATCH TOWERS BEHIND R 22 AND NEAR AI2 BUILDING FOR SECURITY GUARDS AND PROVISION OF BARBED WIRE FENCE WITH CONCERTINA COIL ALONG TIFR PERIMETER NEAR SANKALP AT NAVY NAGAR COLABA MUMBAI

Amount

Surface dresssing n.exc 15 cm deep in soft/loose soil

Excavating over areas, n exc 1.5 m deep and getting out hard/densed soil completed all as specified and directed.

All as per item No 2 above but exc 1.5 m but n.exc 3.00m completed all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in foundtions filling and mass concrete completed all as specified and directed.

M & L RCC M-30 design mix for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M & L RCC M-30 design Mix as in Columns, pillars, piers, posts and struts completed all as specired and directed.

M & L RCC M-30 for lintel beams, roof beams, cantilevers, bressummers, lintels over 1.5m span completed all as specified and directed.

M & L RCC M-30 design Mix as in roof Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L RCC M-30 design Mix as in Staircase, chullah hoods, stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc, complete all as specified and directed

M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia

M&L for TMT steel bars 5mm dia and over and upto and including 10mm dia as in spacers , stirrups and binder binding with m.s wire annealed not less than 0.9mm dia complete all as specifed and directed.

M & L Formwork to sides of footings and pedestals, plinth beams for rough finished surfaces completed all as specified and directed

M & L Form work to sides of column square or rectangular in plan for rough finished surfaces of concrete complete all as specified and directed.

M & L Form work to side and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exeeding 200mm thick (Horizontal or sloping) surfaces

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L Formwork to staircases with sloping or stepped soffits including risers and stringers completed all as specified and directed.

Returning, filling in trenches using excavated soil, spreading, levelling, watering and well ramming in layers not exc.25cm

Removing excavated material from the site of work and transporting out of station/site of work suitable to the contractor all as specified.

M&L for Brick work with sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius built in cm 1:6 complete all as directed by EIC.

M&L for 75mm thick Plain Cement Concrete type D2 (1:4:8) (Using 40 mm graded stone aggregate) as in floor sub base, mass concrete and like etc. complete all as specified and directed.

M&L for plastering 20mm thick in CM 1:4 on brick or concrete surfaces on external surface of walls in two coats (15mm thick backing coat and 5mm thick setting coat) mixed with water proofing compound finished fair & even without using extra cement. (Note :- WPC to be mixed in setting coat only and shall be measured and paid separately as supply

Supply of integral water proofing compound of ISI make.

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M & L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

M & L Prepration of new plastered surfaces of walls, pillars, cornices and applying two coats oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling all as specified.

Material and labour for applying two coats of rain coat over a coat of suitable primer ( as per manufacturer construction)on new surface of wall including preparation complete all as specified and directed.

M&L Non - skid coloured ceramic tiles 6 to 7mm thick of size area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate).

Material & Labour for coloured glazed ceramic tiles in vertical surface 300x450x6 to 7mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

M&L 18 to 20 mm thick machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in steps and risers, cill of aluminium sliding window thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L 18 to 20 mm thick machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window over and includig 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engg-In- Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 290 Gde E-165

M&L Providing PCC 1:3:6, type C1(20mm graded stone aggregate) for hold fasts complete all as specified.

S&F 150 mm extruded aluminium handles, fabricated type anodised

S&F 150mm aluminium anodised barrel tower bolts of extruded section

S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

S&F 100mm size stainless steel medium weight butt hinges all as specified and directed.

M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

Material & Labour for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and directed by Engg-In- Charge.

M & L for Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in mass concrete, sub base of hard standing, fixing of fencing post etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor sub base, fixing hold fast, bed blocks etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surface or making impressions of epanded metal whilst the concrete is green complete all as specified and directed.

Material and labour, forming construction joints of width 30mm deep x 10 mm wide filled with sealing compound Grade ‘A’ complete all as specified & directed.

Material & Labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- firming to Fe.290.Gde-E-165

S&F rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete confirming to Fe-410- W(Gde?E-250) quality?B including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.

M&L for for framed work as in doors or gates of angle or other section with gusset plates , rails braces , etc, complete drills for fixing of steel sheeting or other covering ,doors etc; to be prepared for hanging or sliding with and including either hooks or hinges confirming to Fe-410-W.

Material & Labour pre- painted galvalume aluminum zinc coating @ 150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engg-In- Charge.

M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide primer.

Supply and fix wash basin white colour, flat back size type Size 550x400mm with oval type tall including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

Supply and fixing vitreous china wash down water closet (EWC) (Pedestal) P or S trap including PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper. Complete all as specified and as directed.

S&F towel ring (minimum 150mm dia) PTMT all as specified and directed.

S & F PTMT shower (minimum 125mm dia) with or without swivel joints, any size, including fixing to steel pipe or union

S & F PTMT agle stop valves of 15mm bore, with adjustable wall flange.

S & F for grating doom 100 mm dia of PTMT (Minimum weight 25 gms)

Supply and fix 32 mm dia PVC waste pipe (minimum length 900mm) all as specified and directed.

Supply and fix 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed

S & F 75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed

S & F for Aluminium powder coated window and ventilator shutters side hung type without sash, aluminium sections weifhing .55 kg/m including necessary joining cleats, glazing clips rubber packing, all as specified and directed

M & L for 4.8 mm thick tinted glass ordinary quality and glazing with rubber gasket in exc 0.5 Sqm in each pane all as specified and directed.

S & F for 110 mm Bore PVC ( SWR) Pipes single socketed in any lenth with rubber ring joints fixed to walls.

S & F for 75 mm Bore PVC ( SWR) Pipes single socketed in any lenth with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius 110 mm bore.

S&F PVC (SWR) bends any radius 75 mm bore.

Excavating in post holes each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surpluse soil to a distence not exceeding 50meter in hard/dense soil complete all as specified and directed.

S&F mild steel mild screw bolts (machine made) with hexagonal or square heads at one and screw the other and to be fitted with washer and one hexagonal or square nuts 5cm long 10mm dia complete all as specified and directed

S&F mild steel work as in angle iron post and struts in fencing including welding, cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc all as specified (Each line wire to be measured)

M & L for PVC Coated galvanised chain link fencing of wire mesh size 50 mm x 50 mm x 3 mm weighing not less than 2.18 kg/sqm (weight inclusive or PVC coated) PVC coated line wire etc incluing fixing line wire to angle iron posts/rails straining bolts with provision of binding wire etc complete all as specified.

S & F barbed razor type concertina coil hot galvanised spring tensile wire fixed on existing "Y" shape angle post and barbed wire over compound wall coil of 8 to 10 RM per coil of 610 mm dia, minimum weight of coil shall be 13.25 kg/Coil etc all as specified.

S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw including bending and welding angles, as necessary, guest plates, riveting, etc n. exc 10 kg each brackets, conforming to Fe 290 gDE ee0165 (Brackets over 10 Kg each to be measured under structural steel)

S & F 100 mm dia slotted vent cowl complete all as specified and directed

S & F 100 mm dia cone cap cowl complete all as specified and directed

S & F Bib cock PTMT fency type with wall flange 15mm bore with wall flange.

Supply and fixing CP brass swan neck type pillar tap of 15mm dia, screwed down high pressure fancy type 250mm long complete all as specified and directed by Engg-In- Charge.

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand complete all as specified and directed. (Note:- sand will be measured and paid seperetaly)

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M&L for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

Supply and fixing internal steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 4th storey buildings in short piece/length, including breaking the existing brick wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-charge of following sizes :-

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50mm bore

Supply and fix for CP stop cock, screwed down with crutch or butterfly handle suitable for GI tubing 15 mm dia bore including necessary clamp & saddles all as specified.

Supply and fix for CP bib cock, with crutch or butterfly handle screwed both ends for GI tubing 15 mm dia bore including necessary clamp & saddles etc all as specified.

Supply and fix for gun-metal, gate valve 50 mm bore in existing line in position with iron wheel head class I, made out of brass, screwed both ends for GI pipe with union, ISI marked complete all as directed of the following :-

Supply and fix for three layer PVC Storage tank (minimum 3 layers with ISI Marked) of capacity 5000 ltr .inclunding 2 Nos niple complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin switch socket combination 5 Amps on the same board with other switches.

One 3 pin switch socket combination 5 Amps, independent.

All as per item No 93.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.

S & F modular switch, 1 module, single pole one way 6Amp.

S & F modular switch, 1 module, single pole one way 16Amp.

S & F modular socket 2/3 pin, 2 module, 6A.

S & F Socket 6/16A, 6 pin, 2 module.

S & F modular Gang box, screwless of 6/8 module for mounting of modular switches and sockets including blank plate for blank module.

All as per Item No- 99.00 above but of modular PVC Gang box, 3 or 4 module.

All as per Item No- 99.00 above but of modular PVC Gang box, 1 or 2 module.

S&F modular white cover plate with frame, 6 or 8 module.

S&F modular white cover plate with frame, 3 or 4 module.

S&F modular white cover plate with frame, 1 or 2 module.

Supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

S&F LED 60 Watts building security light in Aluminium PDC housing, toughened glass cover in IP66 protection with 3000 (k) including GI bracket and connecting light with three core copper wire from connector or ceiling rose.

Supply and fix ceiling fan 230V, 50 Hz, AC, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling with all allied accessories connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as sepecified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep (minimum 1200 RPM) with, blades, frame and louvers including connection as required at site with flexible copper cable all as per specified and directed.

S&F MCB DB SPN confirming to IP 43 - IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distembering to the affetced to walls.

All as per Item No- 110.00 above but of 4 way.

S&F MCB SPN, 32 Amp, 10 KA, 230 Volt.

S&F MCB, single pole, upto 32 Amp, 10 KA, 230 Volt.

M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to the connecting GI wire 4.0 mm and including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead by means of GI nuts, bolts as per connecting to equipment with provn charcol and salt complete all as per electric plate No 3 of SSR Part-1 including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 16 sqmm 2.0 core.

M & L for 50 mm dia high density polyethylene pipe (HDPE) of pressure 6 KGF/Cm2, for road crossing of cable or for cable protection laid in trenches or above ground surfaces all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Cutting existing road surfaces or hard standing 0.45 mtr depth and width minimum 30cm (22mm thick comprising bituminuous topping) for laying of pipes/cables and making good disturbed surfaces to match with existing surfaces all as specified.

Material and labour for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), for coping and finished surface without using extra cement.

S&F manual operated security search light complete with brass body including LED 200 watt lamp with lens, handle for rotation of search light luminous flux 26000, operating temperature 20 deg C to 60 deg C, IP-65 protection, working humidity 5% to 95% RH of range cover 250 Mtr, THD<10%, power factor>0.95, CRI>70, mounting base cap, reflector complete system including taking out U/S complete all as directed.

Anil Industrial Corporation

JANKI ENTERPRISES

sunenterprises