Replacement of old electrical wiring of 5 Nos. S-5 type, 10Nos. S-4 type, 30 Nos S-3 type, 40 Nos. S-2 type and 15 Nos S-1 type houses in BSL(P) Sundernagar, Distt. Mandi (HP)

Surface P.V.C Conduit Pipe wiring system with flush piano type switches: Wiring in PVC insulated copper conductor single core FR cable (ISI marked),overall 1.5 mm, 1100 V grade to be laid in heavy gauge P.V.C. Fire retardant conduit pipe 20 mm/25 mm dia (ISI MARKED) installed on surface etc. complete with PVC boxes (Plastic on surface Boxes) required for having (Flush/Piano type accessories ) step type electronic fan regulators 100 watt (Socket size), bell push 5 pin 6 Amp,(4 module boxes),16 Amp Universal socket(six module boxes), 6/16/20 Amp Switches Extra. And covered with Brown Bakelite white Glazed translucent back side printed Sheet 3mm thick extra .PVC connector(For Fan boxes and Call bell), MS saddle clamp, PVC circular junction boxes( 4 way ½ deep for wall ), bonding to earth with PVC insulated Copper conductor single core FR cable (ISI marked) 1 sq. mm 1100v grade(For 6 Amp wall socket & Plug Control Point) and other Petty material extra, including the cost of above material and painting as required:- Wiring fan point (without Fan box)

Wiring light point

Wiring call-bell point

Wiring 3 Pin 6 Amp. Plug control comprising wall socket.

Wiring 3 pin 16/20 amp. power plug control point

PVC insulated FR copper conductor cables: Supply and erection of PVC insulated FR Single core unsheathed copper conductor cable ISI marked suitable upto 1100 vols grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by engineer incharge. :- Overall size 6 sq.mm (Un-Sheathed) (For main and sub main).

PVC insulated FR copper conductor cables: overall size 4 sq.mm (Un-Sheathed) (For main and sub main).

PVC insulated FR copper conductor overall 2.5 sq.mm (Un-Sheathed) (For main and sub main).

MINIATURE CIRCUIT BREAKER: Supply and erection of Miniature Circuit Breaker MCB’s for circuit protection against over load and short circuit current fault suitable for 240/215 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specification including connection with suitable size of thimbles/lugs:- MCB single pole 0.5 to 4amp (10kA, Curve-C).

MCB single pole 6 to 32amp. (10kA, Curve-C).

MCB double pole 50, 63amp. (10kA, Curve-C).

MCB double pole 40amp. (10kA, Curve-C).

Sheet metal double door. Distribution board MCB's/ RCBO/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP43-IK09 metal door (dust protected) asper IS 8623-1 &3 ,IEC61439-1&3 suitable for flush mounting with fully insulated copper bus-bars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/RCBO's/RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/RCCB's/RCBO's as incomer and SP MCB's As outgoings and for TP & N horizontal distribution board with provision TPN/FP MCB's/RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD Generals specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N double door distribution board 8 way each.

Sheet metal double door. Distribution board MCB's/ RCBO/ RCCB's, 12 way each :- SP& N Double door Distribution Board 12 way each

Dismantling wiring points & fittings: Dismantling old wiring points including necessary repair to wall etc. :- Fan, Light, Call bell point.

Wall Socket/ power Plug Point

RAKESH KUMAR

M/S SHARMA ELECTRICAL WORKS

Prem Singh Thakur