GE (EAST) DELHI CANTT-10

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engineer-in-Charge.

M&L for taking down turbo air ventilator and refixing the same

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per sqm.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick rendering in CM 1:4 as in riser of steps, skirting, dado and pillar complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing to a distance exc 1.50Km and not exc 5.00 km including loading, unloading and stacking at the destination complete all as directed.

M&L for Providing, cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work.

M&L for clean sawn Second class hard-wood in scantlings

M&L Preparation of old plastered wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent slats, and applying two coat of white wash on walls.

M&L Preparation of old painted surfaces of steel work of any description exc 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint.

All as per item No. 16 above but wooden surfaces.

Taking down carefully old unserviceable copper/aluminium point wiring from PVC conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket, light fittings etc and making good the disturbed surface complete all as directed.

M&L point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC Concealed/ surface (Partly concealed and partly surface) ISI marked of size 20 mm dia medium grade PVC conduit with all fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl MS box of suitable size for mounting switches/sockets/fan regulator etc , with bakelite sheet 3 mm thick of suitable size complete all as directed for the following :-

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

All as per srl item No. 19 here-in-before but with 2.5 Sqmm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire on independent board.

S & F of switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F of switch piano, flush type single pole, one way 15 Amp complete all as directed.

S & F of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S&F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

S&F in replacement of suspended architectural 40 w LED luminaire provides soft-light and glare free symmetrical illumination(with continous mounting and Cap) fittings with hanging arrangement.complete all as specified and directed.

Supply and fixing in replacement of LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant complete with IP protection complete all as specified and directed.

Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 40 Amp, SPN type with complete all as specified and directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core ISI marked including all connections with thimbles of suitable size including taking out old unserviceable LT U/G cable complete all as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 core ISI marked including all connections with thimbles of suitable size including taking out old unserviceable LT U/G cable complete all as directed

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth strip 32mm x 6mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 40 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Dismantling of Brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillers etc, but excluding ashlers facings, dressed stonework and precast concrete articles.

M&L brickwork with sub class 'B' st or curved on plan exc 6m mean radius built in cement mortar 1:6.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

M&L for 15mm thick cement plaster in cement mortar 1:6 on brick masonry or concrete surface etc on wall finished even and smooth without using extra cement complete all as specified and directed at site by Engineer-in-Charge.

M&L preparation of new plastered wall surfaces and applying three coats of white wash on walls

M&L for 100mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate s in sub base to floor complete.

M&L for 50mm thick PCC (1:2:4) type B-1, using 20mm graded aggregate complete.

M&L for 50mm thick sand filling under floors or in foundations incl watering nd consolidation.

M&L for Machine pressed precast concrete interlocking paver lock any shape and size conforming to IS of 60mm thickness, M-35 Grade with grey cement and pigment.

M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement : 3 coarse Sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete including earthwork.

aggarwal engineers contractors

POONAM ENTERPRISES

V r traders

STAR CONSTRUCTION CO

M/S Yamin

M/S MSD & Associate

R. S. Associates