ADDN AND ALTN AND SPECIAL REPAIRS TO BLDG NO P-69 AT ALGARAH UNDER GE 867 EWS

Amount

Dismantling of Asbestos cement (corrougated, semicorrugated, etc) sheets in roof coverings all as specified and as directed.

S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S & F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store all as specified and as directed. (measured overall as fixed along the centre line over fittings and accessories)

S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC drop ends (for spigot or socket ends) or nozzles all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC stop ends (for spigot or socket ends) or nozzles all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165 complete all as specified and as directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) all as specified and as directed.

Demolition of brick/ concrete block/ stone boulder masonery walling built in Cement mortar of any description complete all as specified and directed by EIC.

M & L Brickwork with fly ash bricks,straight or curved on plan exc 6m mean radious, built in CM 1: 6 complete all as specified and directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

M & L RCC, (nominal mix) type B-1, 1:2:4 (20mm graded stone aggt) in lintels bands, cills and similar works all as directed by EIC.

M & L RCC, (nominal mix) type B-1, 1:2:4 (20mm graded stone aggt) in slabs sopported in walls, beams and colmns in floors, roofs landings balconies, canopies, deck slabsand in shelves and similar works etc all as directed by EIC.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete all as specified and as directed.

M & L mild steel TMT Bars10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip)

M & L mild steel TMT Bars 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by EIC.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical suface like, dado and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6)

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including and over 20mm thick screed bed CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Rounded to edges of stone slabs one edge, such as in steps, cooking platform,and other similar work all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L chequered cement concrete tiles 300 x 300 x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15 mm thick screed bed in CM 1:6 all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level all as specified and as directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

M&L well seasoned second class hard wood timber scantling in timber framed work; fixed in clean sawn complete all as specified.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

Taking down chowkhats or frame n.exc 1.50 and each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F steel ventilator with top hung shutter fixed type including hinges, steel peg stay, complete complete all as specified and directed.

S & F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed by EIC.

S&F powder coated (min thickness of Powder coateing 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated (min thickness of Powder coateing not less than 50 micron) anodised aluminium door shutters, almn section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodisied aluminum snap beading screws etc, complete all as specified and as directed.

S&F powder coated (min thickness of Powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, almn section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, rubber packing, anodisied aluminum snap beading, screws etc, complete all as specified and as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane complete all as specified and directed by EIC.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed by EIC.

S & F 4.8 mm thick sheet glass ordinary quality frosted or ground or obscured on one side and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed by EIC.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed.

S&F 4 levers mild steel Mortice lock, verticla type, of size 100mm with keys all as specified and as directed.

S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, hings, lock strike plate etc., all as specified and as directed.

S & F 30mm thick flush door shutters , solid core construction with block board core and plywood face panels,commercial type on both face complete & fitted to chowkats all as specified and as directed..

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) all as specified and as directed.

S&F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded sections all as specified and as directed.

S & F 150mm size aluminium handle cast type anodised all as specified and as directed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed all as specified and as directed.

S & F galvanished mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanished wire staples as in any position all as specified and directed by the Engineer in Charge

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification all as specified and as directed.

S&F 125 mm size butt hinges, ectruded aluminium alloy with galvanised mild steel hinhe pin, anodised and fixed, type C-22 all as specified and as directed.

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F 125 mm long aluminium handle cost type anodised all as specified and as directed.

M&L for 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

S & F 40mm Continuous paino honges, mild steel, bright finish or electr galvanised all as specified and as directed.

S&F hasp and staple 150 mm safety type aluminium anodised with hinge pin including bold to hinge plate and fixed with screws all as specified and as directed.

S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm all as specified and as directed.

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc. all as specified and as directed.

M&L prepration of old painted wooden surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints all as specified and directed.

M&L prepring surfaces of wood and wood based materials, new or old of any description, not otherwise described and treated with one coat of creosote oil all as specified and as directed.

M&L prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints all as specified and directed.

M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) with seat cover, white (excluding fixing bolts, flushing cistern and flush pipe all as spfd all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets all as specified and as directed.

S & F in repairs vitreous china wash hand basin, flat back size 450 x 300mm white with pedastal including MS brackets (excluding taps, saste, chain and plug and procelain stopper) etc complete all as specified and as directed.

S & F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F only 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded). (Minimum weight 32 mm -45 gms)all as specified and as directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

S&F in repairs 15mm bore Stop/angle cock, fancy type, cromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and fixed complete all as specified and directed.

S&F in repairs soap dish, vitreous China white, approximate size 160 x 160 x 90mm all as specified and as directed.

S & F in repairs 15mm bib tap cast copper alloy chromium plated with crutch or butterfly handle ,screwed down, scrwed for iron pipe or for brass ferrule and fixed of 15mm bore complete all as specified and as directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F in repairs brass chromium plated D type tubular towel bar of 20mm dia fancy type 60cm long between flanges complete all as specified and directed

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed (Note : Excavation and earth work measured and paid separately)

S&F PVC (SWR) bends 110mm dia all as specified and as directed.

M&L Concrete bed to drain pipes including packing under ,and haumching against the sides of pipes after they are laid and tested all as specified and as directed.

S&F sinks made of stainless steel with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowal size 410mm x 330mm x160mm complete all as specified and directed by EIC.

Taking down copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc and making good disturbed surfaces of wall, floors, etc all as specified and as directed by the Engineer – in - Charge.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing caping with all necessary fittings for light/ex-fan/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 100 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board complete all as specified and as directed.

Material and labour for one 3 pin socket, outlet,15 amps, independent with cables 4 sq mm size all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 6A flush type all as specified and as directed.

Supply and fix switch socket combination 3 Pin 16A, flush type all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply & Fixing Energy efficient LED tube light fitting 4", 1x20 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge.

Supply & fixing mirror light LED fitting 2", 1x10 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing LED light fitting 1x9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and all as directed.

Supply & fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 5 W complete with tube rod all as directed.

Material & labour for making hole in the existing wall/building without distrubing to existing infrastructure for fixing of exhaust fan complete including making good to match with the existing specification complete all as directed by Engineer-in-Charge.

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge.

Supply and Fixing exhaust fan, plastic body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Supply & fixing LED bldg security light suitable for 35 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps all as specified and as directed..

Supply and fix electric water heater, storage type steel body with copper inner tank and heating lement upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including necessary electric/water connection grouting of MS fastener of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & Fix metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified.

Supply and fixing stop cock, butter fly handle, fancy type brass chromium plated of size 15 mm all as specified and as directed..

Supply & fixing PVC connection heavy duty with brass/PTMT nuts of reqd length not exceeding 300 mm with rubber & PVC washer suitable for 15 mm bore GI pipe complete for cold water all as specified and as directed.

Supply & fixing hot water outlet connection made of brass chromium plated with Union rubber washer suitable for 15 mm bore GI pipe for hot water all as specified and as directed.

Supply & fixing Tubes 15 mm medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors. Cutting cheses for concealed water tubing and making good with concrete mortar 1:3 and surface shall be match with exsiting surface by using tiles,putty,pop etc. and applying finishing coat of existing treatment all as specified and as directed.

Material and labour for sub main wiring in repair/replacement with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100V grade IS-694 marked of 4.0 sq mm size drawn through suitable size of PVC casing caping ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell motuh tube ends fixed to the surface of wall/ceiling including one run of 4.0 sq mm PVC insulated and unsheathed FRLS multi stranded copper conductor cable or earth wire continuity conductor complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 12 way 240 Volts AC complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB, Single Pole & Neutral (SPN), 32 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB single pole (SP), 10 kA of 5 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection all as specified and directed by Engr-in-Charge.

Taking down and refixing of wall mounted light fittings of any type, make & size complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

C. M. AGARWAL AND CO

SANJAY MITTAL

M/S G. K. SUTHAR

JAYSHREE CONCERN