Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹32.8 L+₹3.7 L (12.6%)Rejected-Finance AZAD COLONY B 90 FEET ROAD SOURA SRINAGAR J K 190011 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190011 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹32.9 L+₹3.7 L (12.7%)Rejected-Finance KHUNMOH SRINAGAR PIN 191104 J K | SRINAGAR | SRINAGAR | J K | 191104 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
28 Aug 2021, 6:00 pmClosed
GARRISON ENGINEER
GE 970 EWS C/O 56APO PIN 913970
PROVN OF LT APFC PANEL FOR VARIOUS EM INSTALLATION AT OAF MANASBAL SONAMARG HAFT CHINAR AND TATTOO GRD UNDER GE 970 EWS
2021_MES_463510_1
GE970EWS-30/2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 970 EWS
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹72,000
Yes
21 Jan 2022
29 Jul 2021
30 Aug 2021
29 Jul 2021
28 Aug 2021
14 Aug 2021
Amount
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft/loose soil or soil for taking up or laying of cable complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removal of surplus soil to a distance not exc 50 m and where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
Supply and laying dry river sand locally available for cable cushioning and covering complete all as specified and directed. Note:- For payment purpose punned thickness shall be measured and paid.
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
Supply, laying, jointing & testing under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 95 Sq mm, 3.5 core, aluminium conductor alongwith suitable size aluminium cable glands, lugsand complete all as specified and directed.
All as per item No 6 here in before but of size 70 sqmm 3.5 core ---ditto---
All as per item No 6 here in before but of size 50 sqmm x 3.5 core ---ditto---
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 60 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 + or - 10% Voltage, 50 Hz, Contactor switching, Delta Connected , 7 steps, 20 kVAr x 1, 12.5 kVAr x 2, 5 kVAr x 2 & 2.5 kVAr x 2, Auto / Manual Control, Ambient Conditions - 10 to 45 degree celsius, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed. (Location - Sonamarg HAWS).
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 80 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Voltage, 50 Hz, Contactor switching, Delta Connected , 8 steps, 25 kVAr x 2, 10 kVAr x 1, 5 kVAr x 3 & 2.5 kVAr x 2) Auto / Manual Control, Ambient Conditions - 10 to 45 degree celsius, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed. (Location :- 14 WEU with 200 KVA transformer & OAF Signal Centre with 315 KVA transformer)
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 90 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Volatage, 50 Hz, Contactor switching, Delta Connected , 7 steps, 25.0 kVAr x 1, 20 kVAr x 1, 15 kVAr x 1, 12.5 kVAr x 1, 10 kVAr x 1, 5 kVAr x 1 & 2.5 kVAr x 1) Auto / Manual Control, Ambient Conditions - 10 to 45 degree celcious, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed. (Locatio : - Tatoo Gd with 200 KVA transformer, 278 FD Wk Sp with 315 KVA Transformer, Doodh Ganga PH with 250 KVA transformer)
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 100 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Voltage, 50 Hz, Contactor switching, Delta Connected , 10 steps, 25.0 kVAr x 2, 10 kVAr x 3, 5 kVAr x 3 & 2.5 kVAr x 2) Auto / Manual Control, Ambient Conditions - 10 to 45 degree celcious, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed.(Location : - Manasbal with 315 KVA transformer).complete all as specified and directed.
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 120 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Voltage, 50 Hz, Contactor switching, Delta Connected , 8 steps, 25 kVAr x 3, 20 kVAr x 1, 10 kVAr x 1 & 5 kVAr x 3 ) Auto / Manual Control, Ambient Conditions - 10 to 45 degree celcious, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed. (Location ;- Haft Chinar with 400 KVA transformer & Manasbal with 250 KVA transfotmer).
Material & labour for factory made LT APFC panel outdoor type,double door, padestal mounted, 150 KVAR ,MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Volatage, 50 Hz, Contactor switching, Delta Connected , 10 steps, 25 kVAr x 3, 20 kVAr x 2, 10 kVAr x 2 & 5 kVAr x 3 ) Auto / Mannual Control, Ambinent Conditions - 10 to 45 degree celcious, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, includingdigital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as specified and directed. (Location :- Haft Chinar with 400 KVA transformer & Kistawari PH with 315 KVA transformer).
Material & labour for factory made LT APFC panel outdoor type, double door, padestal mounted, 180 KVAR, MD-XL (MPP Box type resin filled heavy duty ) Capacitor 440 +or - 10% Voltage, 50 Hz, Contactor switching, Delta Connected , 12 steps, 50.0 kVAr x 1, 25 kVAr x 3, 10 kVAr x 4, 5 kVAr x 2 & 2.5 kVAr x 2) Auto / Manual Control, Ambient Conditions - 10 to 45 degree celcious, Backup protection HRC Fuse Din type with base, with IP 54 protection, and aluminium busbar, including digital Voltmeter and Ammeter with controller & indicating Lamps, with in floor mounted Panel made of CRCA sheet of thickness 3.15 mm thick and, powder coated incl one MCCB TPN of suitable capacity as incoming incl necessary copper cables of suitable size for MCCB / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom and painted with powder coating in siemens grey colour including testing complete all as directed. (Location : - Manasbal with 500 KVA transformer, 256 T/C Sub Stn-02 Nos).
Material & labour for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40mm dia upto 7.5 mtr from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed.
FG CONSTRUCTION
M/S HAFIZ AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .