Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC 142 JAGJIVANRAM NAGAR GAROBA MAIDAN NAGPUR 440008 | NAGPUR | NAGPUR | MAHARASHTRA | 440008 | L1 | Accepted-AOC Being Lowest and quoted rates are reasonable | |
| 2 | L2₹23.4 L+₹95,427.50 (4.25%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest | |
| 3 | L3₹23.7 L+₹1.2 L (5.39%)Rejected-Finance BHAVANI KRUPA GANDHI CHOWK NAGPUR | NAGPUR | NAGPUR | MAHARASHTRA | 442302 | L3 | Rejected-Finance Other Than Lowest | |
| 4 | L4₹23.7 L+₹1.3 L (5.77%)Rejected-Finance | L4 | Rejected-Finance Other Than Lowest | |
| 5 | L5₹23.8 L+₹1.3 L (5.78%)Rejected-Finance | L5 | Rejected-Finance Other Than Lowest |
Tender Value
Refer Docs
EMD Value
₹44,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP 442303
COMPREHENSIVE MAINTENANCE OF ESH S IN ZONE I AREA INSIDE DEPOT AT CAD PULGAON UNDER GE PULGAON
2023_MES_595312_1
8005/PUL/E8
Open Tender
Civil Works
Item Rate
240 days
GE PULGAON
As Per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE PULGAON
₹44,000
Yes
20 Jun 2023
13 May 2023
17 Jun 2023
13 May 2023
10 Jun 2023
29 May 2023
15 May 2023 - 27 May 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. Note: 1. For demolition, power for drilling machine, breaker etc will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting
M & L PCC 1:3:6, 75mm thick type C1 as in plinth protection complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20mm graded stone agg.) concrete in surface channels and Saucer drains etc complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1, (20mm graded aggregate) as in copings, cills, sesmic and similar bands, plinth courses, string courses,lacing courses, parapet etc including weathering, slightly rounded or chamfered angle and throating and use of formwork complete all as specified and directed.
M&L in repairs PCC 1:4:8 type D2 (Using 40 mm graded stone aggrgate) as in mass concrete complete all as specified and directed.
Taking down cement or cement lime plaster of any description from stone/brick or concrete surface of wall/ceiling etc including racking out joints hacking for key scrubbing down with water complete all as specified and directed.
M & L rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M & L Rendering 10mm thick in CM 1:3 on fair faces of concrete surfaces of ceiling, beam bottom, roof projection etc, finished even and smooth without using extra cement including necessary scaffolding for any height etc complete all as specified and directed.
Material and Labour for rendering 15mm thick on fair faces of brick work/stone or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement for mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note : Water proofing compound will be measured and paid separately
Supply only Integral water proofing compound of make IMPERMO/ ACCOPROOF complete all as specified and directed.
M & L for applying two coat of oil bound distemper over a of coat of chalk whitening as a primer preparatoy to painting including prepration of newly platered surface of wall complete all as specified and directed.
M & L for applying one coat of oil bound distemper including prepration of old decorated surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfacescomplete all as specified and directed.
M&L for one coat of white wash including prepration of old decorated surface of ceilling complete all as specified and as directed.
M & L for preparation of newly plaster surface and applying two coat of weather proof acrylic emulsion exterior paint (APEX or equivalent) Camouflage pattern over a coat of exterior acrylic primer (Asian or equivalent) etc complete all as specified and directed.
Complete Removal of existing treatment on walls including removing dirt, nails, making good holes cracks etc brooming down with steel wire brushing scrapping down smoke soots etc and Two coats of weather proof exterior Acrylic emulsion paint Camouflage pattern (APEX or equivalent) of any tint over one coat of Exterior Acrylic primer (Asian or equivalent) complete all as specified and directed.
M and L preparation of newly plaster surface on external wall surfaces and applying two coats of cement base paint over over a coat of primer complete all as specified and as directed.
M & L for cutting out cracks to V-section in existing floor/roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen/epoxy/silicon gel and clean dry sand 1:1 (by weight) complete all as specified and directed.
S & F Mild steel flat iron as in hold fast 25x6 mm confirming to Fe 290 Gde E-165 complete all as specified and directed.
M & L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed.
Cutting holes in brick/stone/concrete walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n.exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
M&L in repairs for providing PCC Type-B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
S & F MS door/ ventilator framed work as in door or gate of angle or other section Fe-290W (Gde E-165) quality 'A' with gusset plats,MS plate, rails, braces,guard bars, flats etc complete drilled for fixing for steel sheeting or other covering in door etc including nut and bolts required prepared for hanging with steel doors fitting and hanging on pintels including pintle hinges, stops, hand made sliding bolts, bolts for fixing ventilators any frame on walls etc also complete all as specified all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each
All as per Sl Item No. 01 here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each.
S & F in repairs 1.60 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed.
M & L for applying two coat of synthetic enamel paint on new steel surfaces over 10 cm width or girth including preparation surfaces of any description not otherwise described including red oxide as a prime coat complete all as specified and directed.
M & L for applying one coat of synthetic enamel paint on old steel surfaces over 10 cm width or girth including preparation surfaces of any description not otherwise described including red oxide as a prime coat complete all as specified and directed.
Dismantling of asbestos cement sheets any corrugation including ridge as in roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F for Expanded metal, n exc 4Kg per Sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.
M&L rendering 10mm thick on concrete surface on roof top in cement mortar 1:4 with using water proofing compund & finishing the surface even & smooth without using extra cement. ( Note- Water proofing compound shall be measured and paid seperatly )
M&L for Atactic propylene modified prefabricated membrane (3 mm thick with non-woven polyester mat) minimum weighing 3.5 kg/sqm with side laps of minimum 100 mm and end laps of minimum 150 mm laid and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over compatible bitumen primer at 0.40 ltr/sqm including cleaning surfaces all as instructed as per manufacturer and directed by Engineer-in-charge over roof slab and porches complete all as specified and as directed.
Taking down existing water proofing treatment complete of any description from RCC roof slab and porches by scraping by means of MS scrapper patty or by any suitable tools until the concrete surface of the slab visible and removal of rubbish off the premises as directed to a distance not exc 100 mtr all as specified and as directed. Note : Rate for removal and re-fixing existing lightning conductors/ strips / assembly is deemed to be included under quoted rate of this item.
Taking down Pressed cement concrete tiles incl 15mm thick bedding mortar in CM 1:4 complete all as specified and as directed.
M&L for 25mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) laid on roof slab finished even and fair complete all as specified and as directed.
M&L for Brushing neat cement slurry with 3.0 kg of cement per sq. Metre complete all as specified and as directed.
S & F Hydraulically pressed cement concrete tiles 250x250x22-25mm as decided, machine pressed laid over 15mm thick bedding mortar in CM 1:4 having joint of tiles 2-3 mm wide set jointed and pointed with chemical like Tile-grout or equivalent as approved by GE complete as specified and directed.
All as per item No 38.00 but fixing only
M/s MM TRADERS
M/s Dara Constructions, Pulgaon
SHREE SIDDHIVINAYAK TRADERS
Krishana electronics
Bidder Name
SHREE SIDDHIVINAYAK TRADERS
karambir constructions
M/s Dara Constructions, Pulgaon
M/s MM TRADERS
Krishana electronics
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .