REPAIR / MAINT OF CEILING FANS, EXHAUST FANS, AIR CIRCULATOR, WALL MOUNTED FANS, INTERNAL ELECTRIFICATION WORK AND DAY TO DAY COMPLAINTS AND ALLIED WORKS AT AF STN INCLUDING REPAIRS TO INTERNAL FLOORING, BRICK WORK, PLASTERING AND MISC REPAIRS IN BLD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm) x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

M&L Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM (1:4) complete all as specified and directed.

Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick CM 1:4 screed bed, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M & L for Chequered cement concrete tiles with Grey cement and no pigment of size 300x300x25mm thick set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed of CM 1:4 complete all as specified and as directed

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair without using extra cement, complete all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete all as specified and directed

M&L Rendering 5mm thick in CM 1:4 with WPC compound over a coat of 10mm thick in CM 1:6 on other than fair faces of brick work surfaces, even and smooth (without using extra cement), complete all as specified and directed

M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement, complete all as specified and directed

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed

M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint and one coat of wall care putty over chalk whitening primer complete all as specified and directed

M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

M&L for unplasticised PVC pipes 15mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

M&L for unplasticised PVC pipes 20mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F in repairs 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified

S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms, all as specified and directed.

S&F in repair 15mm bore brass CP mixer for mixing hot & cold water, screwed down for iron pipe and fixed, complete all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and directed

S&F 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and directed

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified and directed

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook (Make Prayag or equivalent) complete all as specified and directed

S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints all as specified and directed

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) all as specified and directed

S&Fin repairs PVC waste pipe 32mm bore all as specified

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S & F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Fe 410 -W (Gde E- 250) quality A) (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F in repair 1.60 mm Mild steel, plain, black sheet for covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and as directed

M & L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate, 100mm thick as in sub base to floor complete all as specified and as directed

M & L for 50 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring, finishing the surfaces concrete topping even and fair without using extra cement complete all as specified and as directed

Taking down cement plaster on staircase steps/landings, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M&L Rendering 10mm thick on staircase steps/landings concrete surface, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

S & F in repairs for curtain rails with brackets, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and as directed

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Taking down and refixing carefully the Ceiling fan of any size/ make after disconnecting the electric connections for necessary servicing and servicing the ceiling fans of any size/ make including greasing/ oiling/ repairs and replacing the spares such as cater pin unserviceable/rusted nut bolts, split pins rubber wheel bearing washers, bush , and connected items all as specified and directed.

Taking down and refixing carefully the Exhaust fan of any size/ make after disconnecting the electric connections for necessary servicing and replacing the spares, rewinding etc., all as specified and directed. Note : Servicing, Spares and Rewinding shall be measured and paid for separately.

Taking down and refixing carefully the Wall-mounted/ Air-circulator fans/Pedestal fans of any size/ make after disconnecting the electric connections for necessary servicing and replacing the spares, rewinding etc., all as specified and directed. Note : Servicing, Spares and Rewinding shall be measured and paid for separately.

Material and Labour for painting of ceiling fans of any sweep to obtain even, smooth & glossy finish, with synthetic enamel paint of approved colour by using paint spraying devices after filling cavities with filler after cleaning all dust etc., over fan surfaces; complete including writing SM/MES No. in synthetic enamel paint (Black colour) over the same surface where the existing No. was written etc., all as specified and as directed.

Material and Labour for painting of Exhaust/ Pedestal/ Wall-mounted/ Air-circulator fans of any sweep to obtain even, smooth & glossy finish, with synthetic enamel paint of approved colour by using paint spraying devices after filling cavities with filler after cleaning all dust etc., over fan surfaces; complete including writing SM/MES No. in synthetic enamel paint (colour as approved) over the same surface where the existing no. was written etc., all as specified and as directed.

Material and Labour for rewinding of fan motor with super enameled copper winding wire of same gauge and weight after cutting and removing the existing burnt/heated up windings, including cleaning of rotor, stator and varnishing, heating and providing fresh insulating materials for Ceiling fan of 1200/1400 mm sweep including dismantling and reassembling all as specified and directed.

All as per Item No.70 above but for Exhaust fan 225 to 350 mm sweep

All as per Item No.70 above but for Exhaust fan 450 to 600 mm sweep

All as per Item No.70 above but for Pedestal fan 400 to 600mm sweep

All as per Item No.70 above but for Wall mounted fan 400 sweep

All as per Item No.70 above but for Air circulator fan 400 to 600 mm sweep

Supply only ball bearing suitable for Ceiling fan of size 1200/1400mm sweep all as specified and directed

Supply only ball bearing suitable for Exhaust/ Pedestal/ Wall-mounted/ Air-circulator fans fan of any size and make all as specified and directed

Replacement of old/unserviceable capacitor of capacity 2.5 µfd for the fans in position all as specified and directed

Replacement of old/unserviceable capacitor of capacity 3.15/4 µfd for the fans in position all as specified and directed

Supply and fix PVC canopy/Ceiling fan cap with fixing screws etc suitable for ceiling fan 1200/1400mm sweep etc., complete; all as specified and as directed

Supply and fix ceiling fan blade with fixing accesories etc suitable for ceiling fan 1200/1400mm sweep etc., complete all as specified and as directed

Supply and fix exhaust fan blade (metal body) with fixing accessories etc suitable for exhaust fan 300mm sweep etc., with iron channels/Walls with suitable clamps, nut and bolts etc.,incl necessary welding works as per site requirement complete all as specified and as directed

Supply and fix exhaust fan louver (shutter) metal body with fixing accessories etc suitable for exhaust fan of any sweep etc., complete all as specified and as directed

Supply and fix Pedestal/Air circulator fan blade (metal body) with fixing accessories suitable for 450 to 600 mm sweep etc., complete all as specified and as directed

Supply and fix wall mounted fan blade (PVC body) with fixing accessories suitable for 350 to 450 mm sweep etc., complete all as specified and as directed

Supply and Fix ceiling fans down rods fabricated out of 15 mm dia GI pipe medium grade duly cutting/ threading/ drilling etc. Suitable for ceiling fans (1200/1400 mm sweep) fixed by means of check nut and split pin, 'U' clamp bolts, nuts, washers, rubber split pin check nut etc., including taking down the ceiling fan down rods complete; all as specified and as directed.

Supply and Fix in replacement of check nut and split pin including 'U' clamp bolts, nuts, washers, rubber split pin check nut etc suitable for ceiling fan 1200/1400 mm sweep etc., complete all as specified and as directed.

Supply and Fix ceiling fan hook made out of 40 x 6 mm MS flat iron and 10 dia MS round bar bend to shape for hanging ceiling fans including taking down existing unserviceable fan hook complete; all as specified and as directed.

M&L for making hole for fixing of exhaust/ventilation fan size 200 mm to 600 mm with necessary civil work as per site requirement complete make good the wall/ventilation window match with exist complete all as specified and directed.

Supply and fixing in replacement of 200 mm dia, 900 RPM, fresh air fan with plastic louvers, frame incl necessary alteration for fixing of fan in exist window as per site requirement complete all as specified and directed.

M&L Point wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for one light/fan/Bell/5 Amp socket all as specified and directed.

M&L Point wiring in Existing conduit with 4 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for 15Amps socket all as specified and directed.

M&L for replacement of laminated hylam sheet top cover with brass screws, cup wahser suitable for 03/04 modules concealed box and cutting of grooves for switchs,sockets and regulator etc complete all as specified and directed. (Note: 1. Rates deemed to be included for removing and refixing of electrical point connections in switch board complete. 2. Switch,sockets,regulators to be measured and paid separately)

All as per Item No. 93 above but for 06 to 10 modules complete.

All as per Item No. 93 above but for 18 to 24 modules complete.

S&F Switch piano flush type, single pole,5 Amps complete all as specified and directed.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all as specified and directed.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all as specified and directed.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all as specified and directed.

S&F electronic fan regulator, flush type phenolic laminated sheet etc complete all as specified and directed.

Rectifying faults by attending faults of point/sub main wiring complaints (excluding fittings and fixtures) any rating/ make/ model/ type in position including testing of serviceability of point wiring, finding of fault/ defect and repairing, jointing of wires/ cables properly with required jointing materials and making wiring functional etc., complete; all as specified and directed. Note:- (i) The rate quoted is deemed to be inclusive of cost of the required materials like insulation tape etc where required. (ii) Provn of point/sub main wiring, switch, socket accessories will be paid under relavent items. (iii) Contractor or his accredited Engineer/ representative shall collect the list of daily complaints from Complaint Cell. (iv) Contractor shall submit the daily list of all rectified/ non-rectified complaints to the Engineer-in-charge at the end of the day's work on each working day of unit/ AGE's office.

S&F of LED tube light fitting 20/22 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessoreis including taking down old light complete all as specified and directed.

S&F of LED tube light fitting 9/10 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessoreis including taking down old light complete all as specified and directed.

Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ including taking down fitting complete all as specified and directed.

Supply and fix LED building security light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light complete all as specified and directed.

S&F in replacement of Recess mounting LED backlite panel ceiling light environmental friendly aesthetically designed recess mounting luminaire with high brightness LED luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30/34 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220 V, including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables connecting up ceiling rose and fittings and testing complete,all as specified and as directed.

S&F in replacement of surface mounting LED backlite panel ceiling light environmental friendly aesthetically designed recess mounting luminaire with high brightness LED luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30/34 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220 V, including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables connecting up ceiling rose and fittings and testing complete,all as specified and as directed.

pmv.enterprises (BID ID -3131889)

NAVEEN ENTERPRIESES (BID ID -3137453)